• 한국정보디스플레이학회:학술대회논문집
• /
• 2000.01a
• /
• pp.101-102
• /
• 2000

The performance of ac plasma display panels (PDP) is influenced strongly by the surface glow discharge characteristics on the MgO thin films. This paper deals with the surface glow discharge characteristics and some physical properties of MgO thin films prepared by reactive RF planar unbalanced magnetron sputtering in connection with ac PDP. The samples prepared with the de bias voltage of -10V showed lower discharge voltage, lower erosion rate by ion bombardment, higher optic transparency and higher crack resistance in annealing process than those samples prepared by conventional magnetron sputtering or E-beam evaporation.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.212-217
• /
• 2000

Bi$_2$Sr$_2$CuO$_{x}$(Bi-2201) thin films have been fabricated by atomic layer-by-layer deposition using ion beam sputtering(IBS) process. During the deposition, 14 wt%-ozone/oxygen mixture gas of typical pressure of 5.0$\times$10$^{-5}$ Torr is supplied with ultraviolet light irradiation for oxidation. XRD and RHEED investigations reveal that a buffer layer with compositions different from Bi-2201 is formed at the early deposition stage of less than 10 units cell and then Bi-2201 oriented along the c-axis is grown.n.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.97-97
• /
• 1999

이온빔 스퍼터링을 이용해 유리 기판위에 Tin-doped Indium Oxide (ITO) 투명 전도성 박막을 성장시켜 이온빔의 전류밀도와 에너지 그리고 기판 온도에 따르는 ITO박막의 구조적, 전기적, 광학적 특성을 분석하였다. 또한, 반응성 가스인 산소의 아르곤에 대한 유량비를 변화시켜 이온 빔 스퍼터링시에 산소 분압이 ITO 박막의 물성에 미치는 영향을 조사하였다. 이온 소스는 직경 5-cm인 cold hollow cathode ion gun을 이용하였으며 base pressure는 2$\times$10-5 Torr이며 가스 주입 후의 3$\times$10-4 Torr이하의 working pressure에서 박막을 증착하였다. 이온 전류 밀도는 5$\mu$A~15$\mu$A까지 변화시켰으며 이온 에너지는 0.7keV~1.3keV까지 변화시켰다. 반응성 가스는 아르곤에 대하여 Zmrp 0, 50, 100%까지 변화시켰으며 기판 온도는 50, 100, 150, 20$0^{\circ}C$로 변화시켰다. ITO 박막의 결정구조는 Ar 이온만으로 스퍼터링한 경우에는 XRD 상에서 [400] 방향으로 우선성장하였으며 산소분압이 증가함에 따라 [222] 방향으로 우선 성장함을 확인 할 수 있었다. 전기적 특성은 Ar ion에 Oxygen ion의 비율이 약간만 증가하여도 비저항의 큰 증가를 보여 주었다. 이는 산소 vacancy의 감소에 의한 것으로 여겨진다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.440-440
• /
• 2012

Nanomaterials have emerged as new building blocks to construct light energy harvesting assemblies. Size dependent properties provide the basis for developing new and effective systems with semiconductor nanoparticles, quantized charging effects in metal nanoparticle or their combinations in 2 and 3 dimensions for expanding the possibility of developing new strategies for photovoltaic system. As top-down approach, we developed a simple and effective method for the large scale formation of self-assembled Cu(In,Ga)$Se_2$ (CIGS) nanostructures by ion beam irradiation. The compositional changes and morphological evolution were observed as a function of the irradiation time. As the ion irradiation time increased, the nano-dots were transformed into a nano-ridge structure due to the difference in the sputtering yields and diffusion rates of each element and the competition between sputtering and diffusion processes during irradiation. As bottom-up approach, we developed the growth of CIGS nanowires using thermal-chemical vapor deposition (CVD) method. Vapor-phase synthesis is probably the most extensively explored approach to the formation of 1D nanostructures such as whiskers, nanorods, and nanowires. However, unlike binary or ternary chalcogenides, the synthesis of quaternary CIGS nanostructures is challenging because of the difficulty in controlling the stoichiometry and phase structure. We introduced a method for synthesis of the single crystalline CIGS nanowires in the form of chalcopyrite using thermal-CVD without catalyst. It was confirmed that the CIGS nanowires are epitaxially grown on a sapphire substrate, having a length ranged from 3 to 100 micrometers and a diameter from 30 to 500 nm.

• Journal of the Korean Vacuum Society
• /
• v.8 no.1
• /
• pp.36-42
• /
• 1999

Field emission behaviors from diamond-like carbon films were investigated. The films were deposited on n-type Si wafer by ion beam sputtering method using 3 cm Kaufman type ion source. Regardless of the film thicknesses and atomic bond structure, the emission current was much enhanced by electrical breakdown between anode and the film surface. The effective work function was estimated to be about 0.1 eV. In order to identify the emission site, tungsten tip was scanned the damaged region damaged region but localized to a specific site. Analysis using Auger electron spectroscopy and SEM shows that SiC compound was not a sufficient condition for the electron emission. This result showed that the enhanced emission was mainly due to the changes in the chemical bond of the damaged region rather than the enhanced electric field caused by the morphological change.

• Journal of the Korean institute of surface engineering
• /
• v.53 no.2
• /
• pp.67-71
• /
• 2020

For deposition technology using plasma, it plays an important role in improving film deposited with high ionization rate through high density plasma. Various deposition methods such as high-power impulse magnetron sputtering and ion-beam sputtering have been developed for physical vapor deposition technology and are still being studied. In this study, it is intended to control plasma using inductive coupled plasma (ICP) antennas and use properties to improve the properties of Hafnium nitride (HfN) films using ICP assisted magnetron sputtering (ICPMS). HfN film deposited using ICPMS showed a finer grain sizes, denser microstructure and better mechanical properties as ICP power increases. The best mechanical properties such as nanoindentation hardness of 47 GPa and Young's modulus of 401 GPa was obtained from HfN film deposited using ICPMS at ICP power of 200 W.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.02a
• /
• pp.488-488
• /
• 2013

일반적으로 sputtering 방식을 이용한 박막 증착 방법은 장치가 간단하고 고품질의 박막이나 균일한 박막을 만들 수 있는 장점이 있어 널리 사용된다. 본 연구에서는 기존의 sputtering 방식에 Modulation technology를 적용하고자 한다. Modulation technology를 이용하여 전원의 pulse on 시에는 일반적인 sputter 방식으로 기판에 박막을 증착하고 pulse off 시에는 양의 전압을 인가하여 이온빔을 발생시킨 후 기판에 입사시키는 방식을 적용하여 박막 형성의 특성을 향상시키고자한다. 이는 고온의 heater 및 이온빔이나 레이저, 플라즈마 소스 등의 추가적인 에너지원의 장치가 필요 없이 고품질의 박막의 특성을 향상시키는 기대 효과가 있다. Modulated Sputtering System (MSS)에 인가되는 전압과 전류의 특성을 관찰하였으며 MSS에 인가하는 전압과 frequency, 그리고 duty cycle 변화에 따른 이온 에너지 분포를 에너지 분석기를 통해 측정하였다. 또한 Langmuir probe를 이용한 afterglow plasma 상태에서의 이온전류를 측정하였다. 그리고, MSS 이용하여 Ti 박막을 증착하였으며 박막의 특성을 분석하기 위하여 a-step, SEM, XRD, AFM을 이용하여 두께, 결정성장면, 표면 거칠기를 측정하였다. 측정 결과 기판에 입사되는 양이온의 에너지가 증가함에 따라 (002) 결정면 방향에서 (100) 결정면 방향으로 증착되고 표면 거칠기가 낮아짐을 측정하였다. 또한 Graphite 타겟을 이용한 carbon 박막을 증착하였으며 박막의 특성을 분석하기 위하여 Raman을 이용한 분석 결과 양이온의 에너지가 증가함에 따라 박막내의 sp3 함유량이 변화함을 측정하였다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.425-425
• /
• 2008

The transparent conducting oxides(TCOs) are widely used as electrodes for most flat panel display devices(FPDs), electrodes in solar cells and organic light emitting diodes(OLED). Among them, indium oxide materials are mostly used due to its high electrical conductivity and a high transmittance in the visible spectrum. The present study reports on a study of the electrical and optical properties of IGZO thin films prepared on glass and PET substrates by the combinational magnetron sputtering. We use the targets of IZO and Ga2O3 for the deposition process. In some case the deposition process is coupled with the End-Hall ion-beam treatment onto the substrates before the sputtering. In addition we control the deposition rate to optimize the film quality and to minimize the surface roughness. Then we investigate the effects of the Ar gas pressure and RF power during the sputtering process upon the electrical, optical and morphological properties of thin films. The properties of prepared IGZO thin films have been analyzed by using the XRD, AFM, a-step, 4-point probe, and UV spectrophotometer.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.188.1-188.1
• /
• 2014

Aluminum is widely used as a material for electrode on silicon based devices. Especially, aluminum films are used as backside and front-side electrodes in silicon quantum dot (QD) solar cells. In this point, the diffusion of aluminum is very important for the enhancement of power conversion efficiency by improvement of contact property. Aluminum was deposited on a Si (100) wafer and a Si QD layer by ion beam sputter system with a DC ion gun. The Si QD layer was fabricated by $1100^{\circ}C$ annealing of the $SiO_2/SiO_1$ multilayer film grown by ion beam sputtering deposition. Cs ion beam with a low energy and a grazing incidence angle was used in SIMS depth profiling analysis to obtain high depth resolution. Diffusion behavior of aluminum in the Al/Si and Al/Si QD interfaces was investigated by secondary ion mass spectrometry (SIMS) as a function of heat treatment temperature. It was found that aluminum is diffused into Si substrate at $450^{\circ}C$. In this presentation, the effect of heat treatment temperature and Si nitride diffusion barrier on the diffusion of Al will be discussed.

• Journal of the Korean Vacuum Society
• /
• v.5 no.4
• /
• pp.371-376
• /
• 1996

Au films with a thickness around 1600 $\AA$ were deposited onto glass at room temperature by ion beam sputtering with a 5 cm cold-hollow ion gun at pressure $1\times 10^{-6}-1\times 10^{-5}$ Torr. Irradiation of the Au deposited samples was carried out at pressure of $7\times 10^{-6}$ Torr. For the sputter depositions, $Ar^+$ ion energy was 1 keV, and the current density at the substrate surface was 15 $\mu$A/$\textrm{cm}^2$. Effects of 1 keV $Ar^+$ ion dose($I_d$) between $1\times 10^{16}\; and\;2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$on properties such as crystallinity, surface roughness and adhesion, etc. of the films have been investigated. The Au films sputtered by $Ar^+$ ion beam had only (111) plane and the X-ray intensity of the films decreased with increase of $I_d$. The thickness of Au films reduced with Id. $R_{ms}$ surface roughness of the films increased from 16 $\AA$ at as-deposited to 1118 $\AA$ at ion dose= $2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$. Adhesion of Au film on sputtered at $I_d$= $2\times 10^{17}\;Ar^+\textrm{cm}^{-2}$ was 9 times greater than that of Au film with untreated, as determined by a scratch test.