• Journal of the Korean Vacuum Society
• /
• v.21 no.6
• /
• pp.348-353
• /
• 2012

We investigated chemical states of a $Sb_2Te_3$ thin film with the polycrystalline phase by using high-resolution x-ray photoelectron spectroscopy with synchrotron radiation. The $Sb_2Te_3$ thin film was formed by sputtering. The rhombohedral phase was confirmed by x-ray diffraction. To remove the surface oxide, we performed $Ne^+$ ion sputtering for 1 hour with the beam energy of 1 kV and post-annealing at $100^{\circ}C$ for 5 min in ultra-high vacuum. We obtained the Te and Sb 4d core-levels spectra with the peaks at the binding energies of 40.4 and 33.0 eV, respectively. The full-width of half maximum of both the Te and Sb $4d_{5/2}$ core-levels is 0.9 eV. The Te and Sb core-levels only show a single chemical state, and we also confirmed the stoichiometry of approximately 2 : 3.

• The Korean Journal of Food And Nutrition
• /
• v.20 no.2
• /
• pp.150-157
• /
• 2007

Hamcho(Salicorinia herbacea, glasswort), a halophyte, is an annual succulent shrub that grows on coastal wetlands and has been regarded as a functional food for good health. Natural dried red and green Hamcho were extracted with 25% ethanol and water at 70$^{\circ}C$. The antioxidant activities of these four extracts were examined by six different assays, including the measurement of total phenolics, radical scavenging effects on 1,1-diphenyl-2-picrylhydrazyl(DPPH), nitric oxide(NO) and nitrite(NO$_2$) scavenging effects, reducing power, and the inhibitory effect on tyrosinase activity. The total phenolic contents of the four extracts were high at 237 ${\sim}$ 255 mg of gallic acid equivalents per 1 g of dried sample tested. The green Hamcho extracts contained more phenolic compounds than the red Hamcho extracts. When they were compared to tocopherols, the antioxidant activities of the green and red Hamcho powders were significantly higher at the same concentration levels(5 mg and 3 mg, respectively) in a POV test. The inhibition effects of the four extracts at a level of 75 ${\mu}l$ were higher than 98% in the POV test. The red Hamcho 25% ethanol extract showed a high significant effect on DPPH radical scavenging(SC$_{50}$, 90.1 ${\mu}l$). The green Hamcho 25% ethanol extract, however, showed a high significant effect on NO radical scavenging(SC$_{50}$, 6.1 ${\mu}l$). The NO$_2$ radical scavenging effect was assayed at pH 1.2, 4.2 and 6.0, and all the Hamcho extracts scavenged the NO$_2$ radical much more effectively at pH 1.2. The NO$_2$ scavenging effect of the red Hamcho 25% ethanol extract(64%) was as high as that of 5 mM vitamin C at pH 1.2(p<0.05). In the reducing power test, the red Hamcho 25% ethanol extract revealed the highest ferric ion reducing activity among the Hamcho extracts, and its activity was as high as that of 0.33 mg/ml of vitamin C. The four Hamcho extracts showed high tyrosinase inhibition effects of more than 80%, and their activities were higher than 50${\mu}$g of kojic acid. The green and red Hamcho 25% ethanol extracts totally inhibited tyrosinase activity(100%). Therefore, the results suggest that red Hamcho extracts may serve as useful natural antioxidants along with green Hamcho extracts.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.134-134
• /
• 2011

High-k dielectric materials such as $HfO_2$, $ZrO_2$ and $Al_2O_3$ increase gate capacitance and reduce gate leakage current in MOSFET structures. This behavior suggests that high-k materials will be promise candidates to substitute as a tunnel barrier. Furthermore, stack structure of low-k and high-k tunnel barrier named variable oxide thickness (VARIOT) is more efficient.[1] In this study, we fabricated the $WSi_2$ nanocrystals nonvolatile memory device with $SiO_2/HfO_2/Al_2O_3$ tunnel layer. The $WSi_2$ nano-floating gate capacitors were fabricated on p-type Si (100) wafers. After wafer cleaning, the phosphorus in-situ doped poly-Si layer with a thickness of 100 nm was deposited on isolated active region to confine source and drain. Then, on the gate region defined by using reactive ion etching, the barrier engineered multi-stack tunnel layers of $SiO_2/HfO_2/Al_2O_3$ (2 nm/1 nm/3 nm) were deposited the gate region on Si substrate by using atomic layer deposition. To fabricate $WSi_2$ nanocrystals, the ultrathin $WSi_2$ film with a thickness of 3-4 nm was deposited on the multi-stack tunnel layer by using direct current magnetron sputtering system [2]. Subsequently, the first post annealing process was carried out at $900^{\circ}C$ for 1 min by using rapid thermal annealing system in nitrogen gas ambient. The 15-nm-thick $SiO_2$ control layer was deposited by using ultra-high vacuum magnetron sputtering. For $SiO_2$ layer density, the second post annealing process was carried out at $900^{\circ}C$ for 30 seconds by using rapid thermal annealing system in nitrogen gas ambient. The aluminum gate electrodes of 200-nm thickness were formed by thermal evaporation. The electrical properties of devices were measured by using a HP 4156A precision semiconductor parameter analyzer with HP 41501A pulse generator, an Agillent 81104A 80MHz pulse/pattern generator and an Agillent E5250A low leakage switch mainframe. We will discuss the electrical properties for application next generation non-volatile memory device.

• Membrane Journal
• /
• v.30 no.3
• /
• pp.181-189
• /
• 2020

In the present study, a biomimetic alumina membrane was fabricated by using selenic acid as an electrolyte to overcome the asymmetry limit of the square pulse anodization process. The prepared membrane has conical channels with a minimum diameter of 10 nm, a maximum diameter of 50 nm, and a length of 5 ㎛. The rectification property was higher than membranes fabricated by sulfuric acid. It showed 2.9 times larger current at +1 V than -1 V. Also, the membrane, which sulfonic acid group was introduced by surface modification, showed 4.2 times larger rectification property at -1 V than +1 V. Theoretical verifications were supported by the numerical analyses of 2D models. The results of the present study present a convenient method to fabricate two type membranes with different rectification properties and are expected to be used to control ion transport.

• Economic and Environmental Geology
• /
• v.35 no.1
• /
• pp.13-23
• /
• 2002

The chemical compositions of groundwaters from the granite areas mainly belong to Ca-HC0$_{3}$ and Na-HC0$_{3}$type, and some of these belong to Ca-(CI+S0$_{4}$) and Na-(CI+S0$_{4}$) type. Spring waters and groundwaters from anorthosite areas belong to Ca-HC03 and Na-HC03 type, respectively. The result of reaction path modeling shows that the chemical compositions of aqueous solution reacted with granite evolve from initial Ca-CI type, via CaHC0$_{3}$ type, to Na-HC0$_{3}$ type. The result of rain water-anorthosite interaction is similar to evolution path of granite reaction and both of these results agree well with the field data. In the reaction path modeling of rain watergranite/anorthosite reaction, as a reaction is progressing, the activity of hydrogen ion decreases (pH increases). The concentrations of cations are controlled by the dissolution of rock-forming minerals and precipitation and re-dissolution of secondary minerals according to the pH. The continuous addition of granite causes the formation of secondary minerals in the following sequence; gibbsite plus hematite, Mn-oxide, kaolinite, silica, chlorite, muscovite (a proxy for illite here), calcite, laumontite, prehnite, and finally analcime. In the anorthosite reaction, the order of precipitation of secondary minerals is the same as with granite reaction except that there is no silica precipitation and paragonite precipitates instead of analcime. The silica and kaolinite are predominant minerals in the granite and anorthosite reactions, respectively. Total quantities of secondary minerals in the anorthosite reaction are more abundant than those in the granite reaction.

• Journal of the Korean Electrochemical Society
• /
• v.10 no.1
• /
• pp.48-51
• /
• 2007

In order to investigate the effects of particle size and specific surface area(BET area) of spinel powder, $LiMn_2O_4$ were synthesized using metal oxide precursor by co-precipitation method(CoP) and solid state reaction (SSR) .X-ray diffraction(XRD) patterns revealed that the both prepared powder has a well developed spinel structure with Fd3m space group. The $LiMn_2O_4$ prepared by co-precipitation showed spherical morphology with narrow size distribution. However, the $LiMn_2O_4$ prepared by solid state reaction showed relatively smaller particles with irregular shape. The measured BET areas of the powers are $0.8m^2g^{-1}$ (CoP) and $3.6m^2g^{-1}$(SSR). The electrochemical performance of the Prepared $LiMn_2O_4$ powders was evaluated using coin type cells(CR2032) at elevated temperature ($55^{\circ}C$). The $LiMn_2O_4$ prepared by co-precipitation showed the better cycling performance(82.3%capacity retention at $50^{th}$ cycle) than that of the $LiMn_2O_4$(68.3%) prepared by solid state reaction at elevated temperature.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.3
• /
• pp.211-216
• /
• 2010

Boron trifluoride lithium methacrylate ($BF_3$LiMA)-based gel polymer electrolytes (GPEs) were synthesized with various $BF_3$LiMA concentration to elucidate the effect on ionic conductivity and electrochemical stability by a AC impedance and linear sweep voltammetry (LSV). As a result, the highest ionic conductivity reached $5.3{\times}10^{-4}Scm^{-1}$ at $25^{\circ}C$ was obtained for 4 wt% of $BF_3$LiMA. Furthermore, high electrochemical stability up to 4.3 V of the $BF_3$LiMA-based GPE was observed in LSV measurement since the counter anion was immobilized in this self-doped system. On the other hand, it was assumed that there was a rapid decomposition of electrolytes on a lithium metal electrode which results in a high solid electrolyte interface (SEI) resistance. However, a high stability toward graphite or lithium cobalt oxide (LCO) electrode thereby a low SEI resistance was observed from the AC impedance measurement as a function of storage time at $25^{\circ}C$. Consequently, the high ionic conductivity, good electrochemical stability and the good interfacial compatibility with graphite and LCO were achieved in $BF_3$LiMA-based GPE.

• Proceedings of the Plant Resources Society of Korea Conference
• /
• 2018.04a
• /
• pp.14-14
• /
• 2018

This Camptotheca acuminata Decne. (CA), belonging to Nyssaceae, is a deciduous tree. and has been used as Traditional Chinese medicine since ancient times. The CA produces camptothecin a natural indole alkaloid, and reported to have anti-cancer effects. But the studies on biological activities of CA leaves are insufficient. Therefore, this study confirmed various biological activities such as antioxidant, antidiabetic, anticancer, antiinflammatory and metabolism analysis by HPLC-MS/MS of CA leaves. The $RC_{50}$ values of DPPH radical scavenging activity of ethyl acetate fraction, n-Butanol fraction, methanol extraction, water fraction and n-Hexane fraction were $12.23{\pm}0.01$, $15.93{\pm}0.42$, $55.12{\pm}0.45$, $56.29{\pm}4.15$ and $427.29{\pm}6.13ug/mL$, respectively. The $IC_{50}$ values of ${\alpha}$-glucosidase inhibitory activity of ethyl acetate fraction, n-Butanol fraction, methanol extraction, n-Hexane fraction and water fraction were $24.29{\pm}0.14$, $47.86{\pm}0.45$, $54.23{\pm}1.21$ $466.76{\pm}2.21$ and $623.91{\pm}9.67ug/mL$, respectively. The nitric oxide release activity of n-Hexane fraction, methanol extraction, ethyl acetate fraction, water fraction and n-Butanol fraction were $31.49{\pm}5.74$, $29.79{\pm}0.71$, $26.89{\pm}0.71$, $8.24{\pm}5.83$ and $7.75{\pm}4.08%$ at 25 ug/mL, respectively. The anti-cancer activity of n-Hexane fraction, methanol extraction, ethyl acetate fraction, water fraction and n-Butanol fraction were $31.49{\pm}5.74$, $29.79{\pm}0.71$, $26.89{\pm}0.71$, $8.24{\pm}5.83$ and $7.75{\pm}4.08%$ at 25 ug/mL, respectively. The ethyl acetate fraction activities showed higher biological activities than other fractions. Thus, Additional studies were conducted using ethyl acetate fraction. Metabolite analysis was performed using a LCMS-8040 triple quadrupole mass spectrometer. As a result, Five compounds (1-5) were identified in the ethyl acetate fraction of the CA leave. The identification of these compounds was generated by the analysis of fragmentation methods of the negative and positive ion modes. Five compounds were identified as gallic acid (1), chlorogenic acid (2), isoquercetin (3), astragalin (4) and camptothecin (5). These results suggest that the CA leave can be used for functional materials.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.16 no.4
• /
• pp.36-46
• /
• 1979

Using N_ Ch silicon gate technology . the capacitors and transistors with various dimenssion were fabricated. Although the applied process was somewhat standard the conditions of ion implantation for the gate were varied by changing the implant energies from 30keV to 60keV for B and from 100 keV to 175keV for P . The doses of the implant also changed from 3 $\times$ 10 /$\textrm{cm}^2$ to 5 $\times$ 10 /$\textrm{cm}^2$ for B and from 4$\times$ 10 /$\textrm{cm}^2$ to 7 $\times$ 10 /$\textrm{cm}^2$ for P . The D. C. parameters such as threshold voltage. substrate doping level, the degree of inversion, capacitance. flat band voltage, depletion layer width, gate oxide thickless, surface states, motile charge density, electron mobility. leakage current were evaluated and also compared with the corresponing theoretical values and / or good numbers for application. The threshold voltages measured using curve tracer and C-V plot gave good agreements with the values calculated from SUPREM II which has been developed by Stanford University process group. The threshold vol tapes with back gate bias were used to calculate the change of the substrate doping level. The measured subthreshold slope enabled the prediction of the degree of inversion The D. C. testing results suggest the realized capacitors and transistors are suited for the memory applications.

• Journal of the Korean Electrochemical Society
• /
• v.13 no.2
• /
• pp.145-152
• /
• 2010

The gel polymer electrolyte(GPE) were prepared by in-situ thermal cross-linking reaction of homogeneous precursor solution of perfluorinated phosphate-based cross-linker and liquid electrolyte. Ionic conductivities and electrochemical properties of the prepared gel polymer electrolyte with the various contents of liquid electrolytes and perfluorinated organophosphate-based cross-linker were examined. The stable gel polymer electrolyte was obtained up to 97 wt% of the liquid electrolyte. Ionic conductivity and electrochemical properties of the gel polymer electrolytes with the various chain length of perfluorinated ethylene oxide and different content of liquid electrolytes were examined. The maximum ionic conductivity of liquid electrolyte was measured to be $1.02\;{\times}\;10^{-2}\;S/cm$ at $30^{\circ}C$ using the cross-linker($PFT_nGA$). The electrochemical stability of the gel polymer electrolyte was extended to 4.5 V. The electrochemical performances of test cells composed of the resulting gel polymer electrolyte were also studied to evaluate the applicability on the lithium polymer batteries. The test cell carried a discharge capacity of 136.11mAh/g at 0.1C. The discharge capacity was measured to be 91% at 2C rate. The discharge capacity decreased with increase of discharge rate which was due to the polarization. After 500th charge/discharge cycles, the capacity of battery decreased to be 70% of the initial capacity.