• The Korean Journal of Pharmacology
• /
• v.27 no.2
• /
• pp.145-153
• /
• 1991

Human neutrophil cathepsin-G, which has been known as one of the active enzymes causing inflammatory diseases, was purified by two steps procedure involving one size exclusion (Ultorogel AcA54) and one ion exchange (CM-Sephadex) chromatography. Purified HNCGs were cross-reacted with Anti-HNCathepsin-G antibodies which were radised in rabbits and purified by cathepsin-G labeled Sepharose 4B affinity chromatography. HNCGs were effectively inhibited by NSAIDs including phenylbutazone, sulindac, oxyphenbutazone, salicylic acid and salicyluric acid. $IC_{50}_s$ of these drugs for inhibition of Cathepsin G were 0.3-0.8 mM. Other NSAIDs including aspirin showed little or no inhibition effect on the activity of Cathepsin G. These results strongly indicated that NSAIDs which showed inhibition effect on the activity of HNCGs possibly be at least a part of mechanism of action which might be related to direct inhibition of cathepsin G at the tissue destruction sites beside of their known mechanism of action as an anticyclo-oxygenase in treatment of inflammatory diseases. Lipid soluble component of Korean Red Ginseng which was known as an anti-inflammatory agent inhibited HNCGs strongly, but no other fractions did inhibited HNCGs. Antibiotics including novobiosin and rifamycin showed some inhibition effect on HNCGs, i. e.., $IC_{50}$ of these drugs were 2.6 mM and 1.5 mM respectively, and other antibiotics including penicillin G showed no or negligible inhibition effect on the activity of HNCGs. However. tetracyclines inhibited HNCGs very effectively at the concentration of therapeutic range. The inhibition effect of the activity of HNCGs by tetracycline are not related to the N-dimethyl radical on the 4 position of the tetracycline molecule. Furthermore, N-dedimethylated tetracyclines may have beneficial effect for long term treatment of chronic inflammatory diseases without developing any drug resistance to microorganisms.

• Korean Chemical Engineering Research
• /
• v.48 no.1
• /
• pp.121-127
• /
• 2010

This study is to optimize the enzyme(lipase) activity for biodiesel production. The ion-exchanged non-woven fabrics(EtA, DEA-EtA non-woven fabric) containing ethanolamine, diethylamine groups are used by radiation induced grafted polymerization onto a non-woven fabric for more effective immobilization of lipase. Since the porous hollow fiber membranes are showed the low throughputibehe non-woven fabric membranes are used for biodiesel production. The physical charateristics of enzyme immobilized and the enzyme activity to EtA and DEA-EtA non-woven fabrics are studied. The EtA non-woven fabrics are quite similar to DEA-EtA non-woven fabric for the amount of enzyme immobilized(EtA non-woven fabric:15.69 mg/g, DEA-EtA non-woven fabric:14.45 mg/g) but DEA-EtA non-woven fabrics have shown the lower permeabiliquite the organic solvent than the EtA non-woven fabrics(EtA non-woven fabric:$3.50mol/h{\cdot}kg$, DEA-EtA non-woven fabric:$0.38mol/h{\cdot}kg$). Optimum characteristics of ehe non-woven fabric membranes and the limilaractivity are also investigated for the effective biodiesel production.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.8
• /
• pp.2648-2656
• /
• 2011

A simple HPLC-DAD method was developed and validated to determine B group vitamin content (thiamine, riboflavin, nicotinamide, pantothenic acid, pyridoxine and folic acid) in supplemented food samples, i.e., infant formula, cereal, low-calorie food, a multi-vitamin pill and a vitamin drink. In this study, the most significant advantages were simultaneous determination of the six B group vitamins in various food matrices and a small number of sample treatment steps that required only an organic solvent, acetonitrile. Moreover, this method prevents reduction of column durability, because the mobile phase does not contain ion-pairing reagents. Analytes were separated on a Develosil RPAQUEOUS $C_{30}$ (4.6 mm ${\times}$ 250 mm, 5 ${\mu}M$ particle size) column with a gradient elution of acetonitrile and 20 mM phosphate buffer (pH 3.0) at a flow rate between 0.8 and 1.0 mL/min. Detection was performed at 275 nm, except for that of pantothenic acid (205 nm). The calibration curves for all six vitamins showed good linearity with correlation coefficients ($r^2$) higher than 0.995. The developed method was validated with respect to linearity, intra- and inter-day accuracy and precision, limit of quantification (LOQ), recovery and stability. The method showed good precision and accuracy, with intra- and inter-assay coefficients of variation less than 15% at all concentrations. The recovery was carried out according to the standard addition procedure, with yields ranging from 89.8 to 104.4%. This method was successfully applied to the determination of vitamin B groups in supplemented food products.

• Journal of the Korean Electrochemical Society
• /
• v.9 no.1
• /
• pp.1-5
• /
• 2006

Lithium titanium oxide $(Li_4Ti_5O_{12})$ with spinel-framework structures as anode material for lithium-ion battery was prepared by sol-gel and high energy ball milling (HEBH) method. According to the X-ray diffraction (XRD), Particle Size Analyses(PSA) and scanning electron microscopy (SEM) analysis, uniformly distributed $Li_4Ti_5O_{12}$ particles with grain sizes of 100 nm were observed. Half cells, consisting of $Li_4Ti_5O_{12}$ as working electrode and lithium foil as both counter and reference electrodes showed the high performance of high rate discharge capacity and 173 mAh/g at 0.2C in the range of $1.0\sim2.5 V$. Furthermore, the crystalline structure of $Li_4Ti_5O_{12}$ didn't transform during the lithium intercalation and deintercalation process.

• Journal of the Korea Concrete Institute
• /
• v.28 no.3
• /
• pp.299-308
• /
• 2016

This paper presents an investigation of the mechanical and microstructural properties on hardened samples that were synthesized using blended binder(fly ash(FA) and blast furnace slag cement(BFSC)), alkali activator and sea water or distilled water. Binders were prepared by mixing the FA and BFSC in different blend weight ratios of 6:4, 7:3 and 8:2. Sodium hydroxide and sodium silicate were used 5 wt% of binder, respectively, as an alkaline activator. The compressive strength and absorption were measured at the age of 3, 7 and 28 days, and the XRD, TGA and MIP tests were performed at the age of 28 days. An increase in the content of BFSC leads to an increase in the quantities of ettringite and C-S-H formed, regardless of the type of mixing water. And it also shows higher strength due to the reduction of pores larger than ~50 nm. All hardened samples in this study have common hydration products of C-S-H, $Ca(OH)_2$ and calcite. Hydrocalumite of all reaction products formed was only present in hardened sample mixed with sea water. For each FA/BFSC mixing ratio, the compressive strength of hardened sample mixed with sea water was similar to that mixed with distilled water. It is proposed that the slight increase of strength of samples mixed with sea water is mainly due to the presence of hydrocalumite phase containing chlorine ion, contributing to the change of total porosity and pore size distribution in samples.

• Journal of Environmental Science International
• /
• v.5 no.6
• /
• pp.813-826
• /
• 1996

The toxic effects of aluminium (Al) on growth, chlorophyll content, $\delta-aminolevulinic$ acid dehydratase (ALAD) activity and anatomy of root and shoot were investigated in 7-day-old azuki bean (Vigna angularis) seedlings. Significant depressions in root elongation was observed in the low concentrations of Al (50, 100 $\muM)$ and increasing Al concentrations caused a sharp decline of root and shoot growth. The degree of inhibition was dependent upon Al supply. Exposure to 50 $\muM$ Al or more inhibited root elongation within 1 day. In the 50 $\muM$ Al treatments, a recovery of root growth was seen after 7 days exposure. In contrast, lateral root initials was little affected by Al exposure. Al toxicity symptoms and growth responses were more well developed in the roots than in the shoots. Analysis of Al localization in root cells by hematoxylin stAlning showed that Al entered root apices and accumulated in the epidermal and cortical cells immeadiately below the epidermis. There was a good positive correlation between the level of chlorophyll and ALAD activity. Increasing Al concentrations caused a decrease in total chlorophyll contents, accompanied by proportional changes in ALAD activity, suggesting a cootr-dinated reduction of a photosynthetic machinery. Al exerted specific influence on the morphology of root ann shoot. At higher concentrations of Al the roots induced drastic anatomical changes. The epidermal cells were disorganized or destructed while the cortical cells exhibited distortion of cell shape and/or disintegration. The diameter of root and transectional area of cortical cells decreased considerably with Al treatment. In the shoot Al also enhanced reduction of diameter of shoot and cell size. Gross anatomy of leaves treated with Al did not differ significantly from the controls, except for fewer and smaller chloroplast. Our results indicate that toxic effect of Al appear to be manifested primarily in roots and secondarily on shoots, and changes in root morphology are related to changes in the root growth patterns. Results are further discussed in re181ion to the findings in other plant species, and it is concluded that Al causes morphological, structural and, presumably, functional damage to the roots of the species investigated.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.35 no.1
• /
• pp.159-166
• /
• 2008

The dental caries can be recovered or worse depending on the velocity of de- and remineralization of tooth. It is possible to remineralize the lesions by fluoride agent, but the results can be distinguished according to one's salivary flow rate, quantity of ion contents, and pH of the saliva. This article presents good results after applying the CPP-ACP paste for the patients who have incipient enamel caries. We instructed the patients to apply the paste everyday in the customed tray. We observed the white spot lesions without getting worse and reducing the size of lesions. After applying the CPP-ACP paste for 6 weeks, we concluded that; 1. It was possible to remineralize the incipient caries without preparation of the teeth. 2. CPP-ACP paste was successful for recovery of the demineralized lesions, especially for mild and moderate caries lesions, not for the severe developemental defects or chronic lesions. 3. CPP-ACP paste was efficient for pediatric patients, and the custumed tray was very useful for patients to apply the paste. 4. The ability of the patients for caring their oral hygiene was improved by routine check up and instructions.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2003.10a
• /
• pp.46-49
• /
• 2003

Cu have been widely used as signal transmission materials for electrical electronic components owing to its high electrical conductivity. However, it's size have been limited to small ones due to its poor mechanical properties, Until now, strengthening of the copper at toy was obtained either by the solid solution and precipitation hardening by adding alloy elements or the work hardening by deformation process. Adding the at toy elements lead to reduction of electrical conductivity. In this aspect, if carbon nanofiber is used as reinforcement which have outstanding mechanical strength and electric conductivity, it is possible to develope Cu matrix nanocomposite having almost no loss of electric conductivity. It is expected to be innovative in electric conduct ing material market. The unidirectional alignment of carbon nanofiber is the most challenging task developing the copper matrix composites of high strength and electric conductivity In this study, the unidirectional alignment of carbon nanofibers which is used reinforced material are controlled by drawing process in order to manufacture the intermediary materials for the carbon nanofiber reinforced Cu matrix nanocomposite and align mechanism as well as optimized drawing process parameters are verified via experiments and numerical analysis. The materials used in this study were pure copper and the nanofibers of 150nm in diameter and of $10~20\mu\textrm{m}$ In length. The materials have been tested and the tensile strength was 75MPa with the elongation of 44% for the copper it is assumed that carbon nanofiber behave like porous elasto-plastic materials. Compaction test was conducted to obtain constitutive properties of carbon nanofiber. Optimal parameter for drawing process was obtained by experiments and numerical analysis considering the various drawing angles, reduction areas, friction coefficient, etc Lower reduction areas provides the less rupture of cu tube is not iced during the drawing process. Optimal die angle was between 5 degree and 12 degree. Relative density of carbon nanofiber embedded in the copper tube is higher as drawing diameter decrease and compressive residual stress is occurred in the copper tube. Carbon nanofibers are moved to the reverse drawing direct ion via shear force caused by deformation of the copper tube and alined to the drawing direction.

• Journal of the Korean Chemical Society
• /
• v.32 no.5
• /
• pp.443-451
• /
• 1988

New crown ether dye-Ⅰ and dye-Ⅱ having an azo group(-N=N-) were synthesized from monobenzo-15-crown-5 and dibenzo-18-crown-6. These dyes showed ${\lambda}_{max}$ of 377 and 383nm respectively. The complexes of alkali metal ions ($Na^+$, $K^+$, $Cs^+$) with dye ligands showed band shift (390~400nm) and intensity increased. For a given anion, the extraction constants are in the order of $K^+$ < $Cs^+$ < $Na^+$ for dye-Ⅰ and $Cs^+$ < $Na^+$ < $K^+$ for dye-Ⅱ. These results show that the selectivity of crown ethers toward the alkali metal ions is dependant on the charge density of cation and the size of crown ether cavity. For a given cation, the order of the extraction constant is $Cl^-$ < $Br^-$ < $I^-$ < picrate. This order coincides with the degree of anion solvation effect.

• Journal of Dairy Science and Biotechnology
• /
• v.15 no.1
• /
• pp.1-9
• /
• 1997

This study was conducted to efficiently separate the Ig from Korean native cattle colostrum and to utilize them as an immunogen for the production of antibodies aginst rabbit. The results obtained were as follows : 1. About 84% of Ig G could be separated from Korean native cattle colostrum by·gel filtration using Superose 12 column on HPLC. The separation profile of Korean native cattle colostral immunoglobulin was similar that of Holstein colostral Ig. 2. Separation of Korean native cattle colostral Ig by anion exchange chromatography using Mono Q column on HPLC was poor resolution chromatographic pattern. 3. Hi-Trap Protein G column showed better results than the Protein A Sepharose CL-4B column in the Ig G binding capacity from Korean native cattle colostral Ig. 4. Protein G Sepharose Fast Flow system resulted in higher Ig g binding capacity as the industrial size scale-up approach. 5. Sufficient titer reaction of antibody to Korean native cattle colostral Ig G was confirmed by ELISA.