• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2344-2347
• /
• 2007

To generate negative ion, a small dielectric barrier discharge (DBD) plasma reactor was used in this study and operated by high AC voltage. With increasing of voltage, we can get more negative ions. However unfortunately, if the input voltage is too high, it will also cause formation of ozone which is very harmful to human being health. So the work of finding out the best condition of Voltage and frequency was carried out firstly. After several times of measurement, operating at 20 kHz frequency is the best condition generating high ion concentration without ozone. For the purpose of finding out the best reactor structure, two types of surface dielectric barrier discharge (DBD) reactors were examined to produce negative oxygen ions at the conditions of 20 kHz frequency. The results indicated that the surface DBD reactor with several small tips showed better characteristics for generation of negative oxygen ions at the same condition.

• 조명전기설비학회논문지
• /
• 제28권1호
• /
• pp.114-122
• /
• 2014

This paper describes a study of the design conditions of a planar surface dielectric barrier discharge (DBD) reactors for generating negative air ions. The capacity of negative air ion generated by the surface DBD reactor is affected by the shape, area ratio and the location of the discharge and induction electrodes of it. To study the optimal design conditions of DBD reactors, the electrodes printed on the substrate of a PCB board is utilized to conduct kind of experiments: the distance of the each electrode along with the X-Y axis, the area ratio of the discharge electrode to induction electrode, and the symmetrical and asymmetrical location of two electrodes. The ion generation capacity is inverse proportional to the gap increases along with X-Y axis. And the optimum ion concentration generated by the ionizer was inspected when the electrodes area ratio was 3 and 5 times of the symmetrical and asymmetrical experimental condition respectively.

• Nuclear Engineering and Technology
• /
• 제29권3호
• /
• pp.218-228
• /
• 1997

Correlations between the amount of DAW (Dry Active Waste) generated from present Korean PWRs and their operating parameters were analyzed. As the result of multi-variable linear regressions, a model predicting the volume of DAW using the number of shutdowns ( $f_{FS}$ ) and total personnel exposure ( $P_{\varepsilon}$) was derived. Considering one standard error bound, the model could successfully simulate about 8575 of the real data. In order to predict the amount of DAW to be generated from a KNGR another model was derived by taking into account the additional volume reduction by supercompaction system. In addition, the volume of WAW (Wet Active Waste) to be generated from KNGR (Korean Next Generation Reactor) was calculated by considering conceptual design data and replacement effect of radwaste evaporator with selective ion exchangers. Finally, total volume of SRW (Solid Radioactive Waste) to be generated from KNGR was predicted by inserting design goal values of $f_{FS}$ and $P_{\varepsilon}$ into the model. The result showed that the expected amount of SRW to be generated from KNGR would be in the range of 33~44㎥. $y^{-1}$ . It was proved that the value would meet the operational target of KNGR proposed by KEPCO, that is, 50㎥. $y^{-1}$ .

• 한국환경과학회지
• /
• 제14권10호
• /
• pp.919-928
• /
• 2005

This study introduces the development of new supercritical water oxidation(SCW)(multiple step oxidation) to destruct recalcitrant organic substances totally and safely by using sodium nitrate as an oxidant. This method has solved the problems of conventional SCW, such as precipitation of salt due to lowered permittivity, pressure increase following rapid rise of reaction temperature, and corrosion of reactor due to the generation of strong acid. Destruction condition and rate in the supercritical water were examined using Polyvinyl Chloride(PVC) and ion exchange resins as organic substances. The experiment was carried out at $450^{\circ}C$ for 30min, which is relatively lower than the temperature for supercritical water oxidation $(600-650^{\circ}C)$. The decomposition rates of various incombustible organic substances were very high [PVC$(87.5\%)$, Anion exchange resin$(98.6\%)$, Cationexchange resin$(98.0\%)$]. It was observed that hetero atoms existed in organic compounds and chlorine was neutralized by sodium (salt formation). However, relatively large amount of sodium nitrate (4 equivalent) was required to raise the decomposition ratio. For complete oxidation of PCB was intended, the amount of oxidizer was an important parameter.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2004년도 학술논문집
• /
• pp.147-157
• /
• 2004

CANBU형 원전에서 $^{14}C$ 핵종은 감속재 계통, 냉각재, 환형기체 및 연료 계통에서 생성된다. 이4가지 계통 중 감속재 계통이 전체 $^{14}C$ 생성의 94.8%를 차지하고 있다. $^{14}C$ 핵종은 용액 내에서 PH에 따라 용존 이산화탄소$^{14}CO_2$), 중탄산 이온($H^{14}{CO_3}^-$), 탄산 이온($^{14}{CO_3}^{2-}$) 및 탄산($H_2^{14}CO_3$)의 형태로 존재하는데, 감속재 계통에서는 PH가 5이상으로서 주로 이산화탄소($^{14}CO_2$), 탄산($H_2^{14}CO_3$) 및 중탄산 이온($H^{14}{CO_3}^-$)으로 존재한다. 본 연구에서는 월성 원전 각 계통에서 사용되고 있는 이온교환수지 현황과 년도별 폐수지 발생현황을 조사하였다. 그리고 월성 원전에서 사용되고 있는 IRN 150 수지의 탄소화합물의 흡$\cdot$탈착 특성을 살펴보기 위해, 중성 pH에서 주로 존재하는 ${HCO_3}^-$ 이온을 IRN 150 수지와 반응시켜 포화시킨 뒤, $NaNO_3$ 와 $Na_3PO_4$ 및 HC1, NaOH의 탈착용액을 선정하여 ${HCO_3}^-$ 이온의 탈착 가능성을 알아보았다. $Na^+$ 이온에 의한 $CO^{2+}$ 이온 및 $Cs^+$이온의 탈착은 거의 발생되지 않았으며, ${NO_3}^-$ 이온 및 ${PO_4}^{3-}$ 이온에 의한 ${HCO_3}^-$ 이온의 탈착은 서서히 진행되었다.

• 공업화학
• /
• 제34권1호
• /
• pp.23-29
• /
• 2023

미세유체 반응기(microfluidic reactor)는 다양한 분야에 적용할 수 있는 새로운 기능성 재료합성을 위해 상당한 발전이 이루어지고 있다. 지난 10년 동안, 미세유체 반응기는 크기, 모양, 조성 및 표면 특성과 같은 물리화학적 (physicochemical) 매개변수를 제어할 수 있는 최종 사용자를 위한 방법론이 주목을 받고 있다. 본 연구에서는 원심력 기반의 미세유체 반응기를 개발하였으며 이를 통해 유도되는 원심력을 이용하여 유체의 흐름을 제어하고 합성되는 다기능성 입자의 다양한 크기 및 조성제어를 수행하였다. 원심력 기반 미세유체 반응기는 실험실에서 쉽게 구할 수 있는 미세바늘, 미세원심분리 튜브, 대용량 원심분리 튜브의 조립을 통해 제작된다. 원심분리기의 회전 속도, 알긴산 전구체의 농도, 칼슘이온의 농도, 그리고 주사침과 칼슘 수용액 간의 거리와 같은 실험적 제어변수 조절을 통해 쉽고 재현성 있게 크기제어가 이루어진 미세입자의 합성이 가능할 뿐만 아니라 복잡한 기술이나 첨단 장비 없이 대량생산이 가능하였다.

• Journal of Radiation Protection and Research
• /
• 제24권2호
• /
• pp.73-86
• /
• 1999

현재 경수로형 원자력발전소의 일차계통 냉각수 정화를 위해 사용되는 이온교환방법은 제염효과가 우수하고 공정이 단순하며 조작이 간편하기 때문에 광범위하게 활용되고 있으나 비금속성분도 함께 제거하여 수지의 수명이 단축되고 폐이온교환수지가 발생되는 단점이 있다. 본 연구에서는 일차계통 냉각수 정화를 위해 사용되는 이온교환수지의 대체공정으로서 전기투석과 이온교환이 결합된 전기탈이온법의 사용가능성을 조사하기 위해 모의 용액을 이용하여 다양한 실험조건하에서 수행하였다. 실험결과 유입유량이 증가할수록 제거율은 증가하고 전력소모는 감소하였다. 금속성분 제거율에서 제염계수 1000으로 일정한 경향을 나타내었으며 전력소모 면에서는 TDS 3 ppm이하를 기준으로 유입유량이 $2.0{\ell}/min$일 때 $40.3mWh/{\ell}$ 이었다. 유입유속이 동일한 조건에서는 희석실에 채운 이온 교환수지의 함량이 증가할수록 금속성분 제거율과 전력소모에서 효과적인 것으로 평가되었다. 이온 교환수지를 채운 전기탈이온 공정은 이온교환수지 자체에 의한 수리적 저항과 현탁질에 의한 수지의 오염으로 인해 운전이 계속될수록 유량이 감소하게 된다. 이러한 단점을 극복하기 위해 이온교환수지 대신 이온전도성 스페이서를 설치하여 실험한 결과 유입유량 문제는 해결할 수 있었으나 전력소모와 금속성분 제거율 및 전류효율 면에서 비효율적인 것으로 평가되었다. 전기탈이온 공정의 연속운전에서도 금속성분 제거율에서 제염계수가 1000으로 안정적인 수준을 유지하였다.

• 공업화학
• /
• 제24권4호
• /
• pp.337-343
• /
• 2013

멤브레인 반응기는 멤브레인과 반응기를 결합하여 반응과 분리의 단위공정을 하나로 결합함으로써 전체공정을 단순화하고 반응효율을 높이고자 하는 혁신 기술로써, 멤브레인을 이용한 생성물의 선택적 제거를 통해 열역학적 평형을 뛰어넘는 전환율, 부반응물 생성 억제에 의한 반응 효율 및 선택성을 향상시킬 수 있다. 특히 이온전도성 세라믹을 이용한 멤브레인 반응기는 연료전지의 개발, 고순도 산소/수소의 분리/정제, 이산화탄소의 전환 및 다양한 화학제품제조에 까지 응용될 수 있기 때문에 시장의 확대와 더불어 크게 발전할 수 있을 것으로 기대된다. 본 총설에서는 수소이온 전도성 세라믹 멤브레인 반응기에 대한 연구동향과 다양한 응용분야 및 향후 전망 등에 고찰해 보고자 한다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 춘계학술대회
• /
• pp.415-418
• /
• 2006

In Japan, research and development were undertaken on gas hydrate-side industrial processes associated with power generation system connections that may particularly be necessary to develop gas hydrated technology-based industrial systems. In so doing, data and engineering technologies useful n formulating guidelines on design of practical process were accumulated. In addition, basic research into theoretical evidence were carried out to promote and support the development of technological elements for those processes. In basic research designed to promote and support the research and development of elemental technologies microanalyses were conducted to understand the decomposition mechanism of mixed gas hydrate. Moreover, measurement technologies that can be applied in industrial processes, such as numerical analyses and concentration ion measurement, were examined. Japan has developed a highly efficient gas hydrate formation process using micro-bubbles with a tubular reactor. Higher formation rate over conventional systems has been obtained by the process. As mentioned above, the technical problems were clarified and the economics were studied from a view point of the NGH technology in this study. The results can be applied for utilization and must contribute to popularization of gas hydrate production.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2015년도 제49회 하계 정기학술대회 초록집
• /
• pp.64-64
• /
• 2015

Control of plasma processing methodologies can only occur by obtaining a thorough understanding of the physical and chemical properties of plasmas. However, all plasma processes are currently used in the industry with an incomplete understanding of the coupled chemical and physical properties of the plasma involved. Thus, they are often 'non-predictive' and hence it is not possible to alter the manufacturing process without the risk of considerable product loss. Only a more comprehensive understanding of such processes will allow models of such plasmas to be constructed that in turn can be used to design the next generation of plasma reactors. Developing such models and gaining a detailed understanding of the physical and chemical mechanisms within plasma systems is intricately linked to our knowledge of the key interactions within the plasma and thus the status of the database for characterizing electron, ion and photon interactions with those atomic and molecular species within the plasma and knowledge of both the cross-sections and reaction rates for such collisions, both in the gaseous phase and on the surfaces of the plasma reactor. The compilation of databases required for understanding most plasmas remains inadequate. The spectroscopic database required for monitoring both technological and fusion plasmas and thence deriving fundamental quantities such as chemical composition, neutral, electron and ion temperatures is incomplete with several gaps in our knowledge of many molecular spectra, particularly for radicals and excited (vibrational and electronic) species. However, the compilation of fundamental atomic and molecular data required for such plasma databases is rarely a coherent, planned research program, instead it is a parasitic process. The plasma community is a rapacious user of atomic and molecular data but is increasingly faced with a deficit of data necessary to both interpret observations and build models that can be used to develop the next-generation plasma tools that will continue the scientific and technological progress of the late 20th and early 21st century. It is therefore necessary to both compile and curate the A&M data we do have and thence identify missing data needed by the plasma community (and other user communities). Such data may then be acquired using a mixture of benchmarking experiments and theoretical formalisms. However, equally important is the need for the scientific/technological community to recognize the need to support the value of such databases and the underlying fundamental A&M that populates them. This must be conveyed to funders who are currently attracted to more apparent high-profile projects.