• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.19 no.6
• /
• pp.192-207
• /
• 2020

In industrial fields like big factories, efficient management of resources is critical in terms of time and expense. So, inefficient management of resources leads to additional costs. Nevertheless, in many cases, there is no proper system to manage resources. This study proposes a system to manage and track large-scale resources efficiently. We attached Bluetooth 5.0-based beacons to our target resources to track them in real time, and by saving their transportation data we can understand flows of resources. Also, we applied a diagonal survey method to estimate the location of beacons so we are able to build an efficient and accurate system. As a result, We achieve 47% more accurate results than traditional trilateration method.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.372-372
• /
• 2023

강우 유출 시 지표면 토양수분포화도는 직접유출량 및 지하수 저류에 영향을 미칠 수 있기 때문에 강우에 의한 유역 유출량 산정에서 토양수분포화도는 보다 실제와 유사한 모의 결과를 도출하는데 중요한 인자가 될 수 있다. 기존의 모형 기반의 유출량 산정 연구에서 토양수분포화도의경우 강수량, 하천수위, 유량, 지하수위 등 타 수문순환 요소에 비하여 관측 지점 및 관측 자료가 부족하기 때문에 유역 내 수문환경 특성에 따라 가정 된 값을 입력하여 유출량을 산정하였다. 최근 IoT, 5G 통신 등 정보 기술의 혁신과 이상 홍수에 의한 피해 저감을 위한 실시간 유출량 해석 모형 개발 등에 적용할 경우 모의 결과가 실제와 매우 다르게 나타나는 경우가 발생할 수 있다. 본 연구에서는 토양수분포화도의 지상 관측 자료와 위성 관측 자료를 동기화 하는 기법을 개발함으로써 중권역 단위의 유출량 산정 정확도를 향상시키고자 하였다. 기존의 지상 관측 자료는 토양수분포화도의 비교적 정확한 데이터를 제공하나 관측 자료를 유역의 대푯값으로 적용할 수 있는 지에 대한 추가 검증이 필요하다. 위성 관측자료는 유역 전반의 토양수분포화도 정보를 관측할 수 있으나 고해상도의 자료를 제공하지 못하기 때문에 유역 전체에 일관된 데이터를 적용할 수밖에 없는 한계가 발생한다. 지상 관측자료와 위성관측자료의 동기화 기법을 개발함으로써 본 연구진은 중권역 단위의 유역 내 비교적 정확한 토양수분포화도 데이터를 적용할 수 있도록 하였다. 본 연구의 결과물은 유출량 해석 결과의 정확도를 높임으로써 급격한 호우 사상 발생에 따른 이상홍수에 대응할 수 있는 유역 물 관리 대책의 기초 자료로 활용 할 수 있을 것으로 기대된다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.357-357
• /
• 2023

2017년 7월 16일 집중호우로 인해 무심천 상류에 위치한 충청북도 청주시 상당구 남일면 고은리 655번지의 농경지 침수 피해가 발생하였다. 대상지역의 우안 제방에는 기존에 수동식 수문이 설치되어 있었으나 내구연한이 지나고 부식되어 수년전에 망실되었으며, 2017년 7월 홍수 이후 유사한 규모의 홍수가 발생 할 경우 대상지역은 홍수피해를 겪을 수밖에 없는 상황에 처해 있다. 이에 따라 홍수방어 시설인 전동식 수문을 설치하여 설치 전·후의 침수 피해를 분석하였다. 본 연구에서는 청주 수위관측소의 2017년 7월 15~16일 수위자료를 수집하여 수위-유량관계곡선식(Rating Curve)을 적용한 시간당 유량자료를 산정하였으며, 수문설치 지점인 고은리 655번지를 시점으로 하류 약 15.871km에 위치한 흥덕교까지 HEC-RAS 모형을 이용하여 홍수분석을 수행하였다. 무심천 우안 제방 내 수문이 설치되기 전과 후에 따른 대상지역의 제내지 침수구역 범위를 산정하여 비교 분석하였다. 측점은 96개의 횡단면으로 구성하였으며, 부정류 해석을 위한 경계조건으로 상류단 유입량, 측방 유입량 및 하류단 수위를 적용하였다. 홍수분석 결과 단면별 최대수위는 EL.41.92m~EL.66.29m의 범위를 나타내고 있으며, 적용 홍수에 따른 최대 유속은 3.17 m/s로나타났다. 수문설치 지점의 하천 횡단에서 발생하는 최고 수위는 EL.66.29m로 산정되었으며, EL.66.29m를 기준으로 전동식 수문이 설치되기 전과 후의 침수범위를 분석하였다. 설치 전 홍수분석 결과 제내지 침수구역의 면적은 141,309.3m²로 분석되었다. 전동식 수문을 설치함에 따라 대상지역의 제내지 침수 피해를 겪지 않은 것으로 분석되었다. 향후 전동식 수문과 IoT기술을 접목하여 지자체의 재난관리 시스템과 연동할 수 있다면, 유사한 침수피해를 최소화 하는데 기여할 것으로 판단된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2021.05a
• /
• pp.330-331
• /
• 2021

Newly, the fourth industrial revolution is a way of describing the blurring of boundaries between the physical, digital, and biological worlds. It's a fusion of advances in AI (artificial intelligence), robotics, the IoT (internet of things), 3d printing, genetic engineering, quantum computing, and other technologies. At the world economic forum in Davos, switzerland, in january 2016, chairman professor (klaus schwab) proposed the fourth industrial revolution for the first time. In order to apply the AHP (analytic hierarchy process) analysis method, the first stage factors were designed as Digital Technology, Physics Technology and Biological Technology. In addition, the second stage factors were organized into 8 detailed services presented in the conceptual model. Thus, we present the theoretical and practical implications of these results.

• Journal of Korea Society of Industrial Information Systems
• /
• v.29 no.4
• /
• pp.43-54
• /
• 2024

This study presented a cybersecurity risk management system in a smart factory environment. A smart factory refers to a factory that optimizes the production system and increases efficiency. However, this digitized environment is vulnerable to cyber attacks, and manufacturing companies can suffer serious damage from disruptions in production systems or information leaks. Therefore, a systematic approach to effectively managing cyber security risks is essential in smart factories. In this study, a continuous security risk management system for each stage of the smart factory was proposed along with business process-based security risk assessment. These studies will help to further improve cybersecurity risk management in smart factories. It will also play an important role in ensuring that smart factories operate safely and efficiently.

• Journal of IKEEE
• /
• v.28 no.3
• /
• pp.279-284
• /
• 2024

In this paper, we propose a novel method for implementing a microstrip patch antenna with circular polarization characteristics through an asymmetric inset feed structure. The proposed method involves designing an antenna by taking advantage of the length difference of the asymmetric inset slots inserted into the antenna, as well as the lengths of additional slots incorporated into the design to achieve circular polarization characteristics. Using this approach, we designed and fabricated an antenna operating at 2.4 GHz in the S-band for satellite communication systems, utilizing a 1 mm thick FR-4 dielectric substrate. The measurement results confirmed a gain of 2dBi, an axial ratio of less than 3dB, and a reflection coefficient below -10dB in the frequency range of 2.35 to 2.43 GHz. Based on these results, it is expected that by employing the proposed method, circularly polarized antennas utilizing inset feeds can be realised, thereby making them applicable in small satellite communication systems and various wireless IoT environmental service applications that use the ISM band.

• Microbiology and Biotechnology Letters
• /
• v.29 no.2
• /
• pp.84-89
• /
• 2001

Isolation and Characterization of Cathepsin B inhibitor Produced by Streptomyces luteogriseus KT-IO. Han, Kil~Hwan and Sang~Dal Kim*. Department of Applied Microbiology, Yeungnam Universit}/t Kyongsan 712749, Korea - The cathepsin B inhibitor produced by Streptomyces luteogriseus KT-IO was very stable in heat, acidic and alkaline conditions. The cathepsin B inhibitor was isolated from the extracted fraction of culture broth with butanol, methanol and chloroform subsequently, the inhibitor was purified with following several column chromatography sLlch as DEAE-Sephadex A-25, Sephadex G-15, silica gel 60, Sephadex LH-20, and preparative HPLC. The cathepsin B inhibitor showed positively to detective reaction of ninhydrine, 5% H2S04, iodine, but negatively to the reaction of Ehrlich's reagent, DNS, aniline. The molecular formular of cathepsin B inhibitor was elucidated by JR, lH and 13C-NMR, FAB mass and elemental analyzer. Consequently, it was identified as C4HlI04N6. The cathepsin B inhibitor had the mode of competitive inhibition with the reaction of cathepsin B.

• Fire Science and Engineering
• /
• v.31 no.1
• /
• pp.58-62
• /
• 2017

There is a growing need for seismic resistance design. But it is controversial that standards of sway brace device in non-structural elements for buildings like pump waterway is vary widely. Therefore, in this study to get a valid range of sway brace device in seismic resistance design, using load test of sway brace device. As a result, load of safe range from 0 to 18.5 kN and under 29.4 kN, no structural fault of sway brace device. And using internet of things get a data of seismic resistance design from sensor node like accelerometer, GPS, tilt sensor and temperature sensor through steps of sampling and prediction. These results will be acceptable for monitoring system for seismic resistance in non-structural elements.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.591-600
• /
• 2016

Computing technologies are increasingly applied to most casual human environment networks, as computing technologies are further developed. In addition, the rapidly increasing interest in IoT has led to the wide acceptance of speech recognition as a means of HCI. In this study, we present a novel method for recognizing the Korean vowel 'ㅜ', as a part of a phoneme based Korean speech recognition system. The proposed method involves analyses of bulk indicators calculated in the time domain instead of analysis in the frequency domain, with consequent reduction in the computational cost. Four elementary algorithms for detecting typical waveform patterns of 'ㅜ' using bulk indicators are presented and combined to make final decisions. The experimental results show that the proposed method can achieve 90.1% recognition accuracy, and recognition speed of 0.68 msec per syllable.

• KIISE Transactions on Computing Practices
• /
• v.22 no.11
• /
• pp.583-590
• /
• 2016

Recently, the rapidly increasing interest in IoT in almost all areas of casual human life has led to wide acceptance of speech recognition as a means of HCI. Simultaneously, the demand for speech recognition systems for mobile environments is increasing rapidly. The server-based speech recognition systems are typically fast and show high recognition rates; however, an internet connection is necessary, and complicated server computation is required since a voice is recognized by units of words that are stored in server databases. In this paper, we present a novel method for recognizing the Korean vowel 'ㅗ', as a part of a phoneme based Korean speech recognition system. The proposed method involves analyses of waveform patterns in the time domain instead of the frequency domain, with consequent reduction in computational cost. Elementary algorithms for detecting typical waveform patterns of 'ㅗ' are presented and combined to make final decisions. The experimental results show that the proposed method can achieve 89.9% recognition accuracy.