• 산업기술연구
• /
• 제29권A호
• /
• pp.135-143
• /
• 2009

Most of debris flow occurred in Korea have been known to be caused by the heavy rainfall at the soil deposits on the mother rock, affected by conditions of rainfall, topography and geology, especially terrain deposits. A study on debris flow behavior should be carried out by investigating various types of debris flow systematically and analyzing their complicate characteristics in the engineering view points. Tremendous debris flows occurred at Duksan-ri in Inje-gun of Gangwon province during summer in 2006. These sites are selected to study the characteristics of debris flow by investigating the influencing factors on it and analyzing their correlations between them. Most of data about influencing factors were obtained by visiting sites in field.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권1호
• /
• pp.48-59
• /
• 2018

This paper is mainly concerned with developing the formulae of predicting thermal deformation of steel plate due to multi-line heating. By investigating the results of line heating test and numerical analysis, reasonable heat flux model has been defined. Formulae of predicting the transverse shrinkage and the angular distortion as the dominant thermal deformation types in plate forming by line heating have been derived based on the results of line heating test and numerical analysis with varying plate thickness, heating speed and distance between torches. This paper illustrates how the derived formulae are used in investigating the effect of multi-line heating upon the thermal deformation and how they can be used in defining the limit distance with that there is no interacted effect between torches. This paper ends with describing the extension of the present study.

• Molecules and Cells
• /
• 제46권2호
• /
• pp.120-129
• /
• 2023

Recent technical advances have enabled unbiased transcriptomic and epigenetic analysis of each cell, known as "single-cell analysis". Single-cell analysis has a variety of technical approaches to investigate the state of each cell, including mRNA levels (transcriptome), the immune repertoire (immune repertoire analysis), cell surface proteins (surface proteome analysis), chromatin accessibility (epigenome), and accordance with genome variants (eQTLs; expression quantitative trait loci). As an effective tool for investigating robust immune responses in coronavirus disease 2019 (COVID-19), many researchers performed single-cell analysis to capture the diverse, unbiased immune cell activation and differentiation. Despite challenges elucidating the complicated immune microenvironments of chronic inflammatory diseases using existing experimental methods, it is now possible to capture the simultaneous immune features of different cell types across inflamed tissues using various single-cell tools. In this review, we introduce patient-based and experimental mouse model research utilizing single-cell analyses in the field of chronic inflammatory diseases, as well as multi-organ atlas targeting immune cells.

• 한국주거학회논문집
• /
• 제17권5호
• /
• pp.147-157
• /
• 2006

A study on Composing Unit Spaces of Apartment Houses according to the Differentiation in Lifestyle by survey on preferences. The purpose of this study is to propose composition models of unit spaces for 85m2 net area apartment houses by lifestyle types. This study set up a hypothesis that there is a critical divergence of preferences in composition types of unit spaces according to lifestyle. To prove the hypothesis, investigation on variable floor plans of apartments to extract spatial composition types of units and questionnaire survey on lifestyleand preferences for composition types were implemented. To extract several factors regarding, characteristics of lifestyle, factor analysis, was implemented for each variable. Cluster analysis was conducted to cluster interviewees by similarity of lifestyle. To identify and define how each factor reacts, ANOVA and cross tabulation analysis between factors and clusters were used. The type of spatial composition was analyzed by plane characteristic, spatial relation and spatial usability on the basis of apartment plate type. As a result, lifestyle was divided into three types: reasonable lifestyle, trend-seeking lifestyle and conservative lifestyle. As, the result of investigating characteristics for the type of spatial composition according to the type of lifestyle, preferred types and main districts were different. Therefore, the hypothesis was proved.

• 대한산업공학회지
• /
• 제22권3호
• /
• pp.399-412
• /
• 1996

With respect to the effects of types of knowledge on human diagnostic performance, the results of several experiments claimed that training with procedural knowledge is more effective than training with principle knowledge. However, more useful results would be attained by investigating when and how the principles of system dynamics is valuable for diagnosis. Accordingly, we conducted an experiment to reevaluate the value of principle knowledge in two problem situations. A simulator system, named DLD, to diagnose an electronic device was created. It is a context-free digital logic circuit which includes forty-one gates of three basic types. The experiment investigated the effects of principle knowledge over common procedural knowledge. The experimental results showed that the effects of principle knowledge is dependent on the complexity of diagnostic situations. This adds up on experimental evidence against the presumed ineffectiveness of principle knowledge and forward reasoning in fault diagnosis. The results also suggest the source of the usefulness of principle knowledge.

• Water Engineering Research
• /
• 제2권1호
• /
• pp.21-31
• /
• 2001

In this study, laboratory experiments were performed to investigate the flow characteristics of a two-dimensional neutrally buoyant jet in the inlet region of a rectangular laboratory settling tank. Velocity measurements were made with a three-component ADV. Two types of baffles were installed in front of two-dimensional slot; a one-sided and a two-sided baffle. The flow fields from a plane jet impinging on these two types of baffles and a plane jet without a baffle showed quite different characteristics. To concentrate on investigating these flow characteristics, the effects of density currents due to temperature difference or the presence of sediments were not studied. Results of the experiments reveal that the use of the two-sided baffle results in the shortest inlet region. Also shown is that, in addition to the types of baffles, the Froude number turns out to be an important factor in the extent of the inlet region.

• Asia Marketing Journal
• /
• 제20권3호
• /
• pp.39-62
• /
• 2018

Despite the abundance of research on alcoholic-beverage consumption in the food and beverage marketing literature, research directly assessing and comparing consumers' psychological motives for drinking different types of alcoholic beverages is relatively limited. There is also a paucity of research comparing drink-type specific consumption motivations in an Asian market. Paying attention to some recent new changes in the alcoholic-beverages market of South Korea, this study investigated South Korean young adult female consumers' alcoholic-beverage type-specific drinking motives. A self-administered online survey of 340 young adult female drinkers about their alcohol-consumption patterns, alcoholic-drink preferences, involvement with alcohol, and four types of drinking motives (coping, social, conformity, and enhancement motives) revealed differences in: (1) the association between the consumer's alcohol involvement level, alcohol consumption frequency/amount, and preferences for alcoholic beverages across different types of alcoholic drinks; (2) the underlying psychological motives for drinking different types of alcoholic beverages; (3) the association between consumption contexts and alcoholic drink types; and (4) the consumption patterns and drinking motives across different consumer groups that are segmented in terms of their most preferred type of alcoholic beverages. These findings point to the importance of investigating drink-type-specific consumption motivations in alcoholic-beverage consumption research. Limitations and implications for future research are also discussed.

• 한국의류학회지
• /
• 제47권6호
• /
• pp.1113-1136
• /
• 2023

With increasing interest in sustainability, several fashion and beauty brands have developed and offered unique types of sustainable packaging in their stores (e.g., 'knot-wrap,' 'seaweed-based' packaging). The purpose of this study was to investigate the perceived value (i.e., green, aesthetic, functional, emotional, social, self-expression) of unique types of sustainable packaging and its impact on consumers' packaging evaluation, store evaluation, and store patronage intentions in the context of a fashion retail store. This study also assessed the moderating effects of consumer innovativeness and environmental concern. Data were collected from 210 US consumers aged 18 to 26 years through Amazon MTurk. The results of structural equation modeling revealed that green, emotional, self-expression, functional, and aesthetic values perceived from unique types of sustainable packaging had significant positive impacts on packaging evaluation. Packaging evaluation, in turn, positively impacted store evaluation, subsequently influencing store patronage intentions. Consumer innovativeness and environmental concern moderated several paths between the variables. This study adds to the existing literature on sustainable packaging by investigating consumer responses to sustainable packaging that incorporates the 'uniqueness' aspect. Managerial implications regarding the importance of developing and offering unique types of sustainable packaging for fashion brands in their retail stores are discussed.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1036-1043
• /
• 2003

A computer simulation method for investigating the form generation mechanism in the centerless through-feed grinding process is described. The length of the contact line and the magnitude of the grinding force between the grinding wheel and workpieces, vary with the change in the axial location of the current workpiece during grinding. Thus, a new coordinate system and a grinding force curve of previous and/or following workpieces are introduced to treat the axial motion. Experiments and computer simulations were carried out using four types of cylindrical workpiece shapes. To validate this model, simulation results are compared with the experimental results.

• 호남수학학술지
• /
• 제37권1호
• /
• pp.65-97
• /
• 2015

Orders and types of entire functions have been actively investigated by many authors. In this paper, we aim at investigating some basic properties in connection with sum and product of relative type and relative weak type of entire functions.