• Proceedings of the KIPE Conference
• /
• 2018.11a
• /
• pp.203-204
• /
• 2018

Conventional buck-boost converter has the disadvantage that the output voltage is inverted. The single phase non-inverting buck-boost converter(SPNIBBC) used four swithes has H-bridge type Circuit. The output voltage is not inverted. The SPNIBBC can be controlled by the single carrier method and the dual carrier method according to the modulation method. In this paper, we have fabricated the converter and compared the efficiency according to the modulation method.

• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.35D no.6
• /
• pp.28-36
• /
• 1998

We have proposed a new non-inverting SOI buffer circuit for the high speed operation at low supply voltage. The body biases of main MOS devices in the proposed circuit are controlled dynamically via subsidiary MOS device connected efficiently to the body terminal. We showed current derivability of the body controlled devices obtained by device simulation and compared with that of conventional SOI devices. Delay time characteristics of the buffer circuit were analyzed by SPICE simulation and compared with those of conventional SOI CMOS buffer circuits. Delay time reduction of the SOI buffer over conventional SOI CMOS buffer with same area is about 36 % at $V_{S}$=1.2 V and $C_{L}$=2 pF. pF.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.40 no.5
• /
• pp.479-488
• /
• 1991

A novel three-phase quasi-resonant dc link inverter (QRI)with a switch connected between dc voltage source and resonant inductor is proposed. According to the state of switching and load current, the operating mode of the proposed inverter scheme is classified into free-wheeling, inverting, and rectifying mode. By examining the behavior of the circuit in each operating mode, an equivalent circuit which represents all the modes in a unified manner is derived. The operating principle of QRI at inverting mode is analyzed, and it is shown that the maximum voltage of resonant dc link is confined to twice the dc source voltage and that both the zero voltage switching of inverter and the zero current switching of inserted switch are guaranteed. An appropriate current control algorithm is suggested, and the opeating characteristics of proposed resonant inverter are verified through both simulation and experiment.

• Journal of Convergence for Information Technology
• /
• v.11 no.8
• /
• pp.1-7
• /
• 2021

In this paper, a method of extending 1 bit by adding an external device to a parallel interface type Digital-to-Analog conversion(D/A C) circuit is presented. To do this, the principle of the D/A C circuit was examined, and the problems that occur when extending one bit by adding individual devices were analyzed, and a bit extension method of the D/A devices using an OP-Amp. circuit was presented. As the proposed method uses the high-precision characteristics of the OP-Amp., even if an error occurs in the device, only the overall size of the output waveform is affected, and the voltage reversal phenomenon that occurs between each bit does not occur. In order to confirm the effect of the proposed method, an experimental circuit was constructed and the absolute voltage of the output and the relative error were measured. As a result, a voltage error of 0.0756% appeared, confirming that the 0.195% requirement for one bit expansion by adding individual devices was sufficiently satisfied.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.9 no.1
• /
• pp.25-29
• /
• 1984

The active compensation of operational amplifeir is that it compensates the phase shift and the attennation of gain of OP Amp, according as the frequency increases. The compensation circuit is applied to VCVS and interting integrator. For VCVS, the phase shift of proposed compensated circuit is not concern with the frequency and the gain chracteristic is better than the proposde circuit by Soliman, according as the rate of feedback resistors of compensated circuit changes. Voltage follower accomplishies compgnsation using the same circuit. Also, the compensation circuit to increase O-ffactor in inverting integrator is proposed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.9 no.11
• /
• pp.1233-1240
• /
• 2014

For the last three decades after the advent of the Toffoli gate in 1980, while many reversible circuit syntheses have been presented reversible embedding methods onto suitable reversible functions, only a few proposed direct irreversible-to-reversible mapping methods without reversible embedding. In this paper we present two effective policies to reduce the gate cost and complexity for the existing direct reversible mapping methods without reversible embedding. In order to develop new cost reduction policies we consider the cost influence of Toffoli module according to NOT gate arrangement in classical circuits. From this we deduced an inverse proportional property between inverting input numbers of classical AND/OR gates and reversible Toffoli module cost based on a fact - the inverting inputs of classical AND(OR) gates increase(decrease) the Toffoli module cost. We confirm the applications of the inverting input rearrangement and maximum fan-out policies preceding direct reversible mapping will be effective method to improve the reversible Toffoli module cost and complexity with the parallel using of the fan-out and supercell ones.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.59 no.2
• /
• pp.359-362
• /
• 2010

In this study, inverter logic circuits on a plastic substrate are built with two top-gate FETs in series on a single ZnO nanowire. The voltage transfer characteristics of the ZnO nanowire-based inverter logic circuit exhibit a clear inverting operation. The logic swing, gain and transition width of the inverter logic circuit is about 90 %, 1.03 and 1.2 V, respectively. The result of mechanical bending cycles of the inverter logic circuit on a plastic substrate shows that the stable performance is maintained even after many hundreds of bending cycles.

• Proceedings of the KIEE Conference
• /
• 1999.07f
• /
• pp.2505-2507
• /
• 1999

This paper presents novel self excited DC-DC converters such as Buck-boost type, Buck type and also non-inverting Buck-boost type. The proposed converters has the following advantages: simple topology, small number of circuit components, easy control methode. Therefore, these converters are suitable for the portable appliances with battery source. Theoretical analysis and experimental results for SOW class Buck-boost type self oscillation DC-DC converter have been obtained, which demonstrate the high efficiency and good performance.

• Proceedings of the KIEE Conference
• /
• 2005.10c
• /
• pp.326-328
• /
• 2005

In order to reduce the capital and overall operating cost of a fuel-cell system, a high-efficiency fuel-cell power inverter with a simple framework is required. The high-order two-inductance two-capacitance (LLCC) resonant technique is adopted in this study to implement a low-frequency 60-Hz sine wave voltage inverter utilized in the proton exchange membrane fuel-cell (PEMFC) system. The methodology for inverting dc voltage into low-frequency ac boltage is usually generated by the pulse-width-modulation (PWM) technique. However, the PWM-type inverter output has high-frequency harmonic components. Although an adequately designed filter could be utilized to overcome this problem, there are still some undesirable effects introduced by the high-frequency switching loss, electromagnetic-interference, harmonic current, and load variation. A novel power inverter via the LLCC resonant technique is designed for inverting dc voltage into 60-Hz ac sine wave voltage in the PEMFC system. This circuit scheme has the merits of low harmonic components, soft switching, high efficiency, and simplified implementation. The effectiveness of the proposed resonant inverter used for the PEMFC system is verified by numerical simulations and experimental results.

• Proceedings of the KIEE Conference
• /
• 1990.11a
• /
• pp.267-271
• /
• 1990

This paper describes a 3-Phase Quasi-Resonant DC Link Inverter (3-phase QRI), which has two operating modes, ie. inverting mode and rectifying mode. First the 3-Phase QRI is simplified and the resonant circuit is analyzed in comparison with two resonant DC-to-DC converters. This analysis shows that the maximum voltage of resonant capacitor is limited to twice the input voltage irrespective of operating modes. A new simple control method in rectifying mode is suggested, which does not require any other element in power circuit. The characteristic of 3-Phase Quasi Resonant Inverter has been verified by simulation using the proposed control method.