• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.4
• /
• pp.602-610
• /
• 1993

The DDA of new active element and the DDA differential integrator are designed. The DDA can be improved matching problems of external elements in op-amp application circuits. The design of DDA is used the transconductance element, differential pair and $2{\mu}m$ design rule. In order to evaluate the performance of the CMOS DDA, we simulated the DDA voltage inverter and the DDA level shifter using the designed CMOS DDA. Furthermore, the grounded resistor and the differential integrator is designed using the CMOS DDA and we found that its characteristics are agreed to OP-AMP differential integrator's. We performed the layout of the CMOS DDA and DDA differential integrator with MOSIS $2{\mu}m$ CMOS technology.

• Proceedings of the KIEE Conference
• /
• summer
• /
• pp.1172-1175
• /
• 2004

포항 방사광 가속기의 선형가속기는 2.5GeV 전자빔용 마이크로웨이브의 발생을 위하여 80 MW급 클라이스트론(klystron) 11대와 입사부용 65 MW 급 클라이스트론 1대를 사용한다. 80 MW 급 클라이스트론 부하를 구동하기 위하여 최대 펄스 정격출력 200MW(400kV, 500A, 평탄도 $4.4\;{\mu}s$)인 대출력 펄스 전원공급 장치(modulator)가 요구된다. 모듈레이터 시스템 용 PFN(pulse forming network) 커패시터의 충전용 입력전원으로써 최대 출력전압 50 kV, ${\pm}\;0.5\%$ 이내의 전압제어가 가능한 고전압 인버터 전원장치를 적용하여 PLS 선형가속기용 국산화 개발 클라이스트론 부하의 성능시험을 수행하였다. 국산화 개발된 S-band 펄스 클라이스트론은 고전압 길들이기 과정을 거쳐 최대 정격 출력 빔 전압 400 kV 이상까지 시험 완료하였다. 클라이스트론의 정확한 RF 출력성능의 측정을 위하여 방향성 결합기와 검파기를 설치하여 측정시스템의 성능을 개선하였다. 본 논문에서는 포항 방사광 가속기의 국산화 개발 1호 클라이스트론 부하의 성능시험을 위한 50 kV 급 인버터시스템 적용과정에서 수행하였던 시험장치 개선과 PFN의 충전 특성을 분석하였다. 또한, 클라이스트론의 고전압 및 RF 길들이기 시험 결과에 관하여 고찰하고자 한다.

• Journal of Power Electronics
• /
• v.9 no.1
• /
• pp.109-116
• /
• 2009

This paper addresses the output control of a utility-connected double-fed induction machine (DFIM) for wind power generation systems (WPGS). DFIM has a back-to-back converter to control outputs of DFIM driven by the wind turbine for WPGS. To supply commercially the power of WPGS to the grid without any problems related to power quality, the real and reactive powers (PQ) at the stator side of DFIM are strictly controlled at the required level, which in this paper is realized with the Fuzzy PI controller based on the field orientation control. For the Sinusoidal Pulse Width Modulation (SPWM) converter connected to the rotor side of DFIG to maintain the controllability of PQ at the state side of DFIM, the DC voltage of the DC link capacitor is also controlled at a certain level with the conventional Proportion-Integral (PI) controller of the real power. In addition, the power quality at the grid connected to the rotor side of DFIM through the back-to-back converter is maintained in a certain level with a PI controller of the reactive power. The controllers for the PQ at the stator side of DFIM, the DC link voltage of the back-to-back inverter and the reactive power at the grid connected to the rotor side of DFIM are designed and simulated in the PSIM program, of which the result verifies the performance of the proposed controllers.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.385-388
• /
• 2001

In this paper, the gearless traction machine drive system using a permanent-maget motor for high-speed elevators is addressed. This application of permanent-magnet motor to the elevator traction machine enables several improvements including higher efficiency, better ride comfort, smaller size and weight, and so on. PWM boost converter is also adopted so that DC-link voltage regulation, hi-directional power flow, and controllable power factor with reduced input current harmonics are possible. To increase reliability and performance, the control board, which can include the car and group controller as well as PWM converter and inverter controller, is designed based on TMS320VC33 DSP The simulator system for high-speed elevators has been developed so that the drive system of high-speed elevator can be tested without my limitation on ride distance and the load condition. Some experimental results are given to verify the effectiveness of the developed system.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.23 no.12
• /
• pp.136-145
• /
• 2009

This paper proposes control methods and simulation models of a driving system, which consists of converters and inverters, for high speed trains employing multi-level power converters. The control method of a single phase three-level converter for high-speed trains is designed to use DC values instead of instantaneous current values which are usually used in single-phase application, so that it results in a fast and robust voltage control response. In addition, simulation models of Space Vector Pulse Width Modulation (SVPWM) for single phase three-level converters as well as three level inverters are proposed. Experimental results demonstrate the validity of the simulation model for three-level inverters.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.9 no.5
• /
• pp.507-515
• /
• 2004

With the advent of fast power devices, the high dv/dt voltage produced by PWM inverts have been found to cause EMI noise, shaft voltage and bearing current. This paper describes the application of newly developed Conducted EMI reduction SVPWM technique in induction motor drives. The newly developed common mode voltage reduction SVPWM technique don't use any zero-vector states for inverter control, hence it can restrict the common mode voltage more than conventional PWM technique. The validity of the proposed technique by software approach is verified through simulation and experimental results.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.7
• /
• pp.650-657
• /
• 2007

This paper had mentioned about CCP light source application for increasing the efficiency of Xe lamp the mercury-free lamp. In order to increase the efficiency of Xe EEFL, we designed and manufactured the lamp used by mixture gas of Xe, Ne and He. Also, we have analyzed the electrical and optical properties with the firing voltage, sustain voltage, paschen's curve, wall charge, and capacitance. As a result, the firing voltage decreased by increasing the ration of mixture gas. and, It is owing to include the gas with high ionization energy. The firing voltage decreased in condition happening the penning effect, Because the ion of metastable state created from penning effect, Which can encourage the ionization phenomena. Also, the wavelength of 467.12 is increase. because of the energy transition in the wavelength of 147 nm. therefore, we can know about the affection of phosphor with UV emission properties. Through an experiment, Xe 100 % and Xe 75 % confirmed same spectrum properties by each mixture gas ratio. In the case of Xe 50 %, spectrum properties appeared Xe discharge and Ne-He discharge. That analyzed an electrical and optical properties. Therefore, confirmed that is excellent because properties of firing voltage, wall charge, capacitance in Xe 50 %, Ne : He = 9 : 1. We offered parameter in inverter manufacture and lamp manufacture by electrical and optical properties.

• Journal of Power Electronics
• /
• v.19 no.6
• /
• pp.1536-1543
• /
• 2019

This paper presents an improved torque predictive control (TPC) for permanent magnet synchronous motors (PMSMs) using an indirect matrix converter (IMC). The IMC has characteristics such as a high power density and sinusoidal waveforms of the input-output currents. Additionally, this configuration does not have any DC-link capacitors. Due to these advantages of the IMC, it is used in various application field such as electric vehicles and railway cars. Recently, research on various torque control methods for PMSM drives using an IMC is being actively pursued. In this paper, an improved TPC method for PMSM drives using an IMC is proposed. In the improved TPC method, the magnitudes of the voltage vectors applied to control the torque and flux of the PMSM are adjusted depending on the PMSM torque control such as the steady state and transient response. Therefore, it is able to reduce the ripples of the output current and torque in the low-speed and high-speed load ranges. Additionally, the improved TPC can improve the dynamic torque response when compared with the conventional TPC. The effectiveness of the improved TPC method is verified by experimental results.

• Proceedings of the KIPE Conference
• /
• 2019.07a
• /
• pp.156-158
• /
• 2019

낮은 저항 용기를 가열할 수 있는 유도 가열 장치는 유도가열 장치용 하프 브릿지 직렬 공진형 인버터의 높은 입력 전압과 높은 턴 수의 코일을 통해 낮은 저항의 용기를 가열한다. 그러나 자성체 용기는 높은 턴 수의 코일에서 높은 저항 값을 가지므로 적절한 전력을 내기 위해서는 높은 입력 전압이 필요하다. 이러한 경우 부스트 토폴로지의 역률 개선 회로를 사용할 수 있다. 하지만 입력 전압의 변동에 따라 직렬 공진형 인버터의 출력 전력 제어를 위한 동작 점 변동이 필요하므로 인버터의 손실이 변동한다. 본 논문에서는 낮은 저항 용기를 가열하기 위하여 높은 턴 수의 코일을 탑재한 유도 가열 장치용 하프 브릿지 직렬 공진형 인버터에서 자성체 용기의 가열 시 입력 전압 변동에 따른 인버터의 손실 분석을 통해 최적의 입력전압 조건을 선정하고자 한다. 제안하는 입력전압 선정 기법은 2-kW 급 유도 장치용 하프 브릿지 직렬 공진형 인버터 시 제품을 통해 타당성을 검증한다.

• Nanomaterials
• /
• v.12 no.22
• /
• pp.4096-4107
• /
• 2022

In this work, a hybrid-phase transition field-effects-transistor (hyper-FET) integrated with phase-transition materials (PTM) and a multi-nanosheet FET (mNS-FET) at the 3 nm technology node were analyzed at the device and circuit level. Through this, a benchmark was performed for presenting device design guidelines and for using ultra-low-power applications. We present an optimization flow considering hyper-FET characteristics at the device and circuit level, and analyze hyper-FET performance according to the phase transition time (TT) and baseline-FET off-leakage current (I_OFF) variations of the PTM. As a result of inverter ring oscillator (INV RO) circuit analysis, the optimized hyper-FET increases speed by +8.74% and reduces power consumption by -16.55%, with IOFF = 5 nA of baseline-FET and PTM TT = 50 ps compared to the conventional mNS-FET in the ultra-low-power region. As a result of SRAM circuit analysis, the read static noise margin is improved by 43.9%, and static power is reduced by 58.6% in the near-threshold voltage region when the PTM is connected to the pull-down transistor source terminal of 6T SRAM for high density. This is achieved at 41% read current penalty.