• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.288-295
• /
• 1999

This paper presents an application of vector control strategy for 1.2MVA IGBT traction drive for electric railway vehicle. The vector control requires the control of the phase and amplitude of output voltage vector[5]. But in case of traction system far railway vehicle, the one-pulse mode is used in order to utilize the link voltage fully[8]. So it is impossible to control the flux axis current and the torque axis current instantaneously and independently. So this paper proposes the vector control strategy with slip-frequency control at one-pulse mode. And precise switching technique between the two different control structures has been proposed. And the strategy was verified by experimental result with 1.2MVA IGBT inverter with four 210㎾ induction motors.

• 전력전자학회논문지
• /
• 제24권2호
• /
• pp.84-91
• /
• 2019

This study proposes a AC/DC railway vehicle control algorithm that enables simultaneous driving of AC and DC power supply sections. In the Seoul metropolitan region, trolley voltage for railway vehicle is divided into AC and DC power supplies. Therefore, AC/DC railway vehicle algorithm is essential for driving on the outskirts of the region. This study analyzes resonance and beat phenomena for simultaneously running in AC and DC power supply sections, and proposes a control algorithm for railway vehicles with the application of damping and beatless controls based on this analysis. The performance of the proposed algorithm is verified by simulation and analysis of actual driving results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2019년도 전력전자학술대회
• /
• pp.159-161
• /
• 2019

현재 단조용 유도가열 전원으로 사용되는 전류원 SCR 정류기 / 인버터는 입력단의 낮은 역률과 높은 THd를 갖는다. 이러한 단점들 때문에 최근 유도가열 전원장치로써 IGBT PWM 전류원 정류기 및 인버터회로가 연구되고 있다. 본 논문에서는 IGBT PWM 정류기 및 인버터의 제어회로를 제안하고 제어회로의 모델링을 통해 제어기를 설계하여 실험을 통해 그 성능을 검증하였다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2003년도 춘계학술대회 논문집
• /
• pp.660-663
• /
• 2003

This paper proposes a systematic approach for an accurate control of the Terfenol-D actuator taking into account hysteresis, modeled by applying the classical Preisach operator with memory curve. A desired input displacement is calculated by using the hysteresis inverter, which is fed into the actuator. Then the PI compensator corrects the error between the commanded and actual displacements. Experiments with the step responses show that the PI controller settles in 70 ms and the hybrid controller in 20 ms. It means that the concurrent application of two control schemes is effective to control the actuator.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2020년도 전력전자학술대회
• /
• pp.115-117
• /
• 2020

본 논문에서는 300kW급 모듈형 NPC 인버터의 방열 설계를 위해 전력반도체 스위치 소자의 손실을 분석하여 열적 특성을 고려한 인버터 모듈을 설계하고 제작을 하였다. 전력반도체 스위치의 손실은 스위칭 손실과 도통손실로 구분되며, 대부분 열손실로 나타나기 때문에 발열량을 토대로 방열판의 구조 및 크기를 결정하였다. 인버터 높은 출력비를 얻기 위해서는 열 손실을 고려한 방열판 설계는 반드시 필요한 과정으로 설계 과정의 타당성을 검증하기 위해 PLECS를 통한 시뮬레이션과 실험결과를 비교하였다.

• 한국정보전자통신기술학회논문지
• /
• 제15권2호
• /
• pp.144-151
• /
• 2022

본 논문에서는 배터리 응용을 위해 저면적 DC-DC 변환기를 갖는 1.5V 256kb eFlash 메모리 IP를 설계하였다. 저면적 DC-DC 변환기 설계를 위해서 본 논문에서는 단위 전하펌프 회로에서 펌핑 노드의 전압을 VIN 전압으로 프리차징해주는 회로인 크로스-커플드 (cross-coupled) 5V NMOS 트랜지스터 대신 5V NMOS 프리차징 트랜지스터를 사용하였고, 펌핑 노드의 부스팅된 전압을 VOUT 노드로 전달해주는 트랜지스터로 5V 크로스-커플드 PMOS 트랜지스터를 사용하였다. 한편 5V NMOS 프리차징 트랜지스터의 게이트 노드는 부스트-클록 발생기 회로를 이용하여 VIN 전압과 VIN+VDD 전압으로 스윙하도록 하였다. 그리고 펌핑 커패시터의 한쪽 노드인 클록 신호를 작은 링 발진 (ring oscillation) 주기 동안 full VDD로 스윙하기 위해 각 단위 전하펌프 회로마다 로컬 인버터 (local inverter)를 추가하였다. 그리고 지우기 모드 (erase mode)와 프로그램 모드 (program mode)에서 빠져나와 대기 (stand-by) 상태가 될 때 부스팅된 전압을 VDD 전압으로 프리차징해주는 회로를 사용하는 대신 HV (High-Voltage) NMOS 트랜지스터를 사용하여 VDD 전압으로 프리차징 하였다. 이와같이 제안된 회로를 DC-DC 변환기 회로에 적용하므로 256kb eFLASH IP의 레이아웃 면적은 기존 DC-DC 변환기 회로를 사용한 경우보다 6.5% 정도 줄였다.

• 신재생에너지
• /
• 제5권3호
• /
• pp.4-12
• /
• 2009

The effect of change in DFIG (doubly-fed wind power generator) rotating speed and active power on the grid was analyzed to understand the characteristics of wind power using the wind power simulator connected to the grid at Gochang Power Quality Test Center. Electric power quality improvement devices (DVR, STATCOM, SSTS) and electric power quality disturbance application devices for 22.9 kV grid are equipped at Gochang Power Quality Test Center. Induction motor and VVVF inverter were used to emulate the blade of a wind power generator, and a simulator for Cage wound induction generator and DFIG was developed. The trial line were assumed to be 20 km and 40 km in length, and variable wind speed pattern was set using wind speed data from Ducjeokdo to verify the power characteristics of the wind power generator according to rotating speed.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 심포지엄 논문집 정보 및 제어부문
• /
• pp.215-216
• /
• 2008

This paper is proposed a approximation control method(ACM) for the maximum power of a photovoltaic system. It is designed for power systems application and utilities. The proposed Maximum Power Point Tracking(MPPT) control has the advantage to provide a new simple way to approximate the optimal or rated voltage, the optimal or rated current and maximum power rating produced by a solar panel and the photovoltaic inverter. And this straightforward method has the advantage that Pmax and $V_{op}$ can be approximated using the same variable as the dynamic model without using complicate approximations or Taylor series. This paper is proposed MPPT using AMC using weather condition of domestic moderate program technique. This paper is proposed the experimental results to verify the effectiveness of the new methods.

• Journal of Magnetics
• /
• 제19권1호
• /
• pp.20-27
• /
• 2014

This study examined the relationships between protein expression and Poly ADP ribose polymerase in brain cell death in brains damaged by thrombotic stroke and treated with the Full Wave- Cockroft Walton (FWCW) method of Transcranial Magnetic Stimulation (TMS). The two-way switching element for TMS drove a half-bridge inverter of the current resonance of direct current voltage (+) and direct current voltage (-), and the experiment was conducted by stimulating the mice with thrombotic stroke through a range of pulses. Thrombotic stroke was caused of ligation of the common carotid artery of male SD mice, and blood reperfusion was conducted five minutes later. Protein expression was examined in immune reaction cells, which reacted to an antibody to Poly ADP ribose polymerase in the cerebrum cells, and western blotting. Observations of the PARP changes after thrombotic stroke showed that the number of Poly ADP ribose polymerase reactions were significantly lower (p < 0.05) in the group treated with TMS of the FWCW than the group with thrombotic stroke 24 hours after its onset. The application of FWCW-TMS helped prevent the necrosis of nerve cells and might prevent the brain damage that occurs as a result of thrombotic stroke, and improve the function recovery and disorder of brain cells.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 춘계학술대회 논문집 디스플레이 광소자 분야
• /
• pp.169-172
• /
• 2000

A-Si:H and poly-Si TFT characteristics were investigated using an inverted staggered type TFT. The poly-Si films were achieved by various anneal techniques ; isothermal, RTA, and excimer laser anneal. The TFT on as-grown a-Si:H exhibited a low field effect mobility, transconductance, and high gate threshold voltage. Some films were annealed at temperatures from $200^{\circ}C$ to $1000^{\circ}C$. The TFT on poly-Si showed an improved $I_{on}/I_{off}$ ratio of $10^6$, reduced gate threshold voltage, and increased field effect mobility by three orders. Inverter operation was examined to verify logic circuit application using the poly-Si TFTs.