• JSTS:Journal of Semiconductor Technology and Science
• /
• v.16 no.4
• /
• pp.481-487
• /
• 2016

A new two-line based inversion driving method is introduced for low power display-driver ICs. By inserting a timing offset between the chopper stabilization and the alternation of LCD polarity, we can reduce power consumption without noticeable degradation in the display quality. By applying the proposed scheme to 12" LCD applications, we achieved 7.5% and 27% power saving in the display-driver IC with white and black patterns, respectively.

• Transactions on Control, Automation and Systems Engineering
• /
• v.3 no.1
• /
• pp.21-26
• /
• 2001

In this study, we propose a two degree of freedom robust output tracking control method for a class of nonlinear system. We consider hyperbolically nonminimum phase single-input single-output uncertain nonlinear systems. We also consider the case that the nominal input-state equation is differentially flat. Nominal stable state trajectory is obtained in the flat output space via the flat output. Nominal feedforward control input is also computed from the nominal state trajectory. Due to the nature of the method, the generated flat output trajectory and control input are noncausal. Robust feedback control is designed to stabilize the systems around the nominal trajectory. A numerical example is given is given to demonstrate that robust tracking is achieved.

• Bulletin of the Korean Chemical Society
• /
• v.18 no.10
• /
• pp.1076-1082
• /
• 1997

The infrared, Raman, and jet-cooled laser-induced fluorescence excitation spectra of 1,2,3,4-tetrahydronaphthalene have been recorded and analyzed. The observed vibrations have been assigned to understand the conformational behaviors in its electronic ground (S0) and excited (S1) states. Ab initio at the HF/6-31G** level and molecular mechanics (MM3) force field calculations have been carried out to generate the complete normal mode frequencies of the molecule in its S0 state. The vibrational frequencies calculated from the ab initio method show a better agreement with the observed infrared and Raman frequencies than those calculated from the MM3 method. In several cases, the normal mode calculations were very helpful to clarify some ambiguities of previous assignments. In addition, the ring inversion process between two twisted conformers of 1,2,3,4-tetrahydronaphthalene has been reexamined utilizing ab initio calculation. The results show that the ring inversion energy is in the range of 3.7-4.3 kcal/mol which is higher than the previously reported AM1 value of 2.1 kcal/mol.

• Proceedings of the Membrane Society of Korea Conference
• /
• 1999.10b
• /
• pp.37-40
• /
• 1999

• Proceedings of the Membrane Society of Korea Conference
• /
• 2002.05a
• /
• pp.86-89
• /
• 2002

• Proceedings of the Membrane Society of Korea Conference
• /
• 2001.11a
• /
• pp.51-54
• /
• 2001

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.13 no.3
• /
• pp.65-70
• /
• 2003

In this paper, we propose a scalar multiplication method and its hardware architecture which is resistant to SPA while its computation speed is faster than Colon's. There were SPA-resistant scalar multiplication method which has performance problem. Due to this reason, the research about an efficient SPA-resistant scalar multiplication is one of important topics. The proposed architecture resists to SPA and is faster than Colon's method under the assumption that Colon's and the proposed method use same fmite field arithmetic units(multiplier and inverter). With n-bit scalar multiple, the computation cycle of the proposed is 2n·(Inversion cycle)+3(Aultiplication cycle).

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.19 no.3
• /
• pp.75-85
• /
• 2017

A method to estimate hourly temperature profiles on calm and clear nights was developed based on temporal changes of inversion height and strength. A meteorological temperature profiler (Model MTP5H, Kipp and Zonen) was installed on the rooftop of the Highland Agriculture Research Institute, located in Daegwallyeong-myeon, Pyeongchang-gun, Gangwon-do. The hourly vertical distribution of air temperature was measured up to 600 m at intervals of 50 m from May 2007 to March 2008. Temperature and relative humidity data loggers (HOBO U23 Pro v2, Onset Computer Corporation, USA) were installed in the Jungdae-ri Valley, located between Gurye-gun, Jeollanam-do and Gwangyang-si, Jeollanam-do. These loggers were used to archive measurements of weather data 1.5 m above the surface from October 3, 2014, to November 23, 2015. The inversion strength was determined using the difference between the temperature at the inversion height, which is the highest temperature in the profile, and the temperature at 100 m from the surface. Empirical equations for the changes of inversion height and strength were derived to express the development of temperature inversion on calm and clear nights. To estimate air temperature near the ground on a slope exposed to crops, the equation's parameters were modified using temperature distribution of the mountain slope obtained from the data loggers. Estimated hourly temperatures using the method were compared with observed temperatures at 19 weather sites located within three watersheds in the southern Jiri-mountain in 2015. The mean error (ME) and root mean square error (RMSE) of the hourly temperatures were $-0.69^{\circ}C$ and $1.61^{\circ}C$, respectively. Hourly temperatures were often underestimated from 2000 to 0100 LST the next day. When temperatures were estimated at 0600 LST using the existing model, ME and RMSE were $-0.86^{\circ}C$ and $1.72^{\circ}C$, respectively. The method proposed in this study resulted in a smaller error, e.g., ME of $-0.12^{\circ}C$ and RMSE of $1.34^{\circ}C$. The method could be improved further taking into account various weather conditions, which could reduce the estimation error.

• Journal of Biosystems Engineering
• /
• v.39 no.4
• /
• pp.345-351
• /
• 2014

Purpose: Rapid detection of bacteria is very important in agricultural and food industries to prevent many foodborne illnesses. The objective of this study was to develop a portable nuclear magnetic resonance (NMR)-based system to detect foodborne pathogens (E. coli). This study was focused on developing a method to detect low concentrations of magnetic nanoparticles using NMR techniques. Methods: NMR relaxometry was performed to examine the NMR properties of iron nanoparticle mixtures with different concentrations by using a 1 T permanent magnet magnetic resonance imaging system. Exponential curve fitting (ECF) and inverse Laplace transform (ILT) methods were used to estimate the NMR relaxation time constants, $T_1$ and $T_2$, of guar gum solutions with different iron nanoparticle concentrations (0, $10^{-3}$, $10^{-4}$, $10^{-5}$, $10^{-6}$, and $10^{-7}M$). Results: The ECF and ILT methods did not show much difference in these values. Analysis of the NMR relaxation data showed that the ILT method is comparable to the classical ECF method and is more sensitive to the presence of iron nanoparticles. This study also showed that the spin-spin relaxation time constants acquired by a Carr-Purcell-Meiboom-Gill (CPMG) pulse sequence are more useful for determining the concentration of iron nanoparticle solutions comparwith the spin-lattice relaxation time constants acquired by an inversion recovery pulse sequence. Conclusions: We conclude that NMR relaxometry that utilizes CPMG pulse sequence and ILT analysis is more suitable for detecting foodborne pathogens bound to magnetic nanoparticles in agricultural and food products than using inversion recovery pulse sequence and ECF analysis.

• Journal of IKEEE
• /
• v.19 no.3
• /
• pp.288-294
• /
• 2015

CRC function has been built into the high-speed semiconductor memory device in order to increase the reliability of data for high-speed operation. Also, DBI function is adopted to improve of data transmission speed. Conventional CRC(ATM-8 HEC code) method has a significant amounts of area-overhead(~XOR 700 gates), and processing time(6 stage XOR) is large. Therefore it leads to a considerable burden on the timing margin at the time of reading and writing of the low power memory devices for CRC calculations. In this paper, we propose a CRC method for low cost and high speed memory, which was improved 92% for area-overhead. For low-cost implementation of the CRC scheme by the DBI function it was supplemented by data bit error detection rate. And analyzing the error detection rate were compared with conventional CRC method.