• KIEAE Journal
• /
• v.7 no.4
• /
• pp.147-152
• /
• 2007

Numerous non-destructive tests(NDT) to assess the safety of real structures have been developed. System identification(SI) techniques using dynamic responses and behaviors of structural systems become an outstanding issue of researchers. However the conventional SI techniques are identified to be non-practical to the complex and tall buildings, due to limitation of the availability of an accurate data that is magnitude or location of external loads. In most SI approaches, the information on input loading and output responses must be known. In many cases, measuring the input information may take most of the resources, and it is very difficult to accurately measure the input information during actual vibrations of practical importance, e.g., earthquakes, winds, micro seismic tremors, and mechanical vibration. However, the desirability and application potential of SI to real structures could be highly improved if an algorithm is available that can estimate structural parameters based on the response data alone without the input information. Thus a technique to estimate structural properties of building without input measurement data and using limited response is essential in structural health monitoring. In this study, shaking table tests on three-story plane frame steel structures were performed. Out-put only model analysis on the measured data was performed, and the dynamic properties were inverse analyzed using least square method in time domain. In results damage detection was performed in each member level, which was performed at story level in conventional SI techniques of frequency domain.

• Korean Journal of Acupuncture
• /
• v.32 no.4
• /
• pp.151-159
• /
• 2015

Objectives : Pulse diagnosis is considered particularly important among several methods of diagnosis in DongUiBoGam. In spite of its importance, numerous and various pulse descriptions made it difficult to learn and practice pulse diagnosis. In this article, we tried to analyze properties of the twenty-seven pulses from pulse diagnosis cases from DongUiBoGam to enable the practical understanding of pulse diagnosis. Methods : We constituted the four axis according to the eight important pulses. And we analyzed properties of the twenty-seven pulses through the relationship between the four pairs of important pulses and the twenty-seven pulses. To quantify the relevances of important pulses to the twenty-seven pulses, we used the term frequency-inverse document frequency(TF-IDF) method. Results : We could elicit properties of the twenty-seven pulses according to the four axis. Also, we reexamined the categorization of the seven exterior pulses / the eight interior pulses and the similar pulses from DongUiBoGam with the analysis results. Conclusions : We could understand properties of the twenty-seven pulses more specifically with the eight important pulses. And we also could see the relationship among the twenty-seven pulses on each axis. However, the limitation arising from insufficient number of pulse diagnosis cases in this research requires further research with more sources such as other traditional medical records or clinical records in the present time.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.40 no.6
• /
• pp.106-113
• /
• 2003

The modified discrete cosine transform (MDCT) and inverse MDCT (IMDCT) are employed in subband/transform coding schemes as the analysis/synthesis filter bank based on time domain aliasing cancellation (TDAC). And the MDCT and IMDCT are the most computational intensive operations in layer III of the MPEG audio coding standard. In this paper, we propose a new efficient algorithm for the MDCT/IMDCT computation in various audio coding systems. It is based on the MDCT/IMDCT computation algorithm using the discrete cosine transforms (DCTs), and It employs two discrete cosine transform of type II (DCT-II) to compute the MDCT/IMDCT In addition, it takes advantage of ability in calculating the MDCT/IMDCT computation, where the length of a data block Is divisible by 4. The Proposed algorithm in this paper requires less calculation complexity than the existing method does. Also, it can be implemented by the parallel structure, therefore its structure is particularly suitable for VLSI realization

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.47 no.2
• /
• pp.20-32
• /
• 2010

Previous hardware devices to capture human motion have many limitations; expensive equipment, complexity of manipulation or constraints of human motion. In order to overcome these problems, real-time motion capture algorithms based on computer vision have been actively proposed. This paper presents an efficient analysis method of multiple view images for real-time motion capture. First, we detect the skin color regions of human being, and then correct the image coordinates of the regions by using camera calibration and epipolar geometry. Finally, we track the human body part and capture human motion using kalman filter. Experimental results show that the proposed algorithm can estimate a precise position of the human body.

• Journal of Advanced Marine Engineering and Technology
• /
• v.41 no.3
• /
• pp.251-257
• /
• 2017

In this paper, an algorithm for detecting defects in thin-film-transistor liquid-crystal display (TFT-LCD) cell images is presented. TFT-LCD cell images typically contain periodic cell patterns that make it difficult to detect defects. We propose an efficient and powerful algorithm for eliminating the cell patterns using magnitude spectrum analysis. The first step was to obtain a spectrum for a cell image using the Fourier transform while eliminating larger coefficients using an adaptive filter. Next, an image without the cell pattern was obtained by using the inverse Fourier transform. Finally, the defect pixels were detected using the STD algorithm. The validity of the proposed method was investigated using real TFT-LCD cell images. The experimental results indicate that the proposed technique is extremely effective for detecting defects in TFT-LCD cell images.

• Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
• /
• 2009.04a
• /
• pp.23-28
• /
• 2009

The purpose of this study was to improve not only wet-end performances but also paper characteristics by the modification of various factors like molecular design and ionic characteristics of polyacrylamides First of all physical characteristics were observed after modify molecular design of the cationic polyacrylamides to linear, branched and cross-linked. In addition it was found analysis method to confirm branch degree of cationic polyacrylamides to combine ionic titration characteristics and spectroscopic behavior, After application of these structure modified polyacrylamides to the multiple retention systems with inorganic microparticles, it was found adjusting of branch degree of polyacrylamides was very important to optimize wet-end improvement. Second, After polymerization of amphoteric polyacrylamide to have both of cationic and anionic functional group in the polymer, we observed not only physical characteristics but also wet-end improvement to apply recycled pulp and found that the improvement of solution stability to prevent hydrolysis and increase of ash retention dramatically to compare traditional cationic polyacrylamide retention aid, Finally, After polymerization of anionic polyacrylamide, we observed not only wet-end improvement but also paper characteristics to apply preflocculation of PCC and it was found the improvements of flocculation efficiency, retention, ash retention, optical properties of the paper and bursting strength to compare traditional preflocculant of cationic polyacrylamide.

• Applied Chemistry for Engineering
• /
• v.20 no.6
• /
• pp.675-680
• /
• 2009

This article describes NO emission characteristics in SM coal combustion. Combustion experiments was performed in the method of increasing temperature after feeding coal and feeding coal after increasing temperature. NOx emission is in inverse proportion to combustion temperature at the fuel rich condition and it was caused by conversion fuel N to $N_{2}$ at the strong reduction condition. In addition, feeding gas flow rate increased as total fuel NOx increase by conversion of fuel N to NO at the oxidation condition. It could be separated in total fuel-N, volatile-N, char-N to NO according to analysis of total fuel NO emission from char combustion at each temperature. In the result, almost total NOx emission was caused by volatile-N in SM-coal.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.8
• /
• pp.85-93
• /
• 2011

In this paper, we analyzed the function elements of the Integrated meter reading system based on PLC which is working in Mok-dong, Seoul and studied how to improve the vulnerability. Also we propose an efficient method for the estimation of abnormal life status through frequency domain processing of utility meter readings. We found out that even after removing the high-frequency components from the raw meter data, the shape of the graph still maintains the original graph characteristics. The graph of the inverse transformed data has simpler and smoother curve than the original graph pattern. The original graph is not good to be used in deciding whether the residence's life pattern is normal or not. We could find out that the graph which is processed frequency signal has simple and intuitive graph pattern.

• Journal of Digital Contents Society
• /
• v.13 no.2
• /
• pp.255-262
• /
• 2012

Human motion tracking algorithm is receiving attention from many research areas, such as human computer interaction, video conference, surveillance analysis, and game or entertainment applications. Over the last decade, various tracking technologies for each application have been demonstrated and refined among them such of real time computer vision and image processing, advanced man-machine interface, and so on. In this paper, we introduce cost-effective and real-time human motion tracking algorithms based on depth image 3D point matching with a given superellipsoid body representation. The body representative model is made by using parametric volume modeling method based on superellipsoid and consists of 18 articulated joints. For more accurate estimation, we exploit initial inverse kinematic solution with classified body parts' information, and then, the initial pose is modified to more accurate pose by using 3D point matching algorithm.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.13 no.4
• /
• pp.572-582
• /
• 1989

Elastic deformations of an infinitely long strip and a beam loaded by uniform pressure upon their upper surfaces, with the fixed-free end dondition, are considered within the range of small strains. All local governing equations are satisfied up to first order in strains, and to take into account the higher order terms neglected in the local governing equations, the overall equilibrium is imposed exactly up to the leading order. The success of the approach relies upon the semi-inverse method and the decomposition of deformations in which the classical linear theory guides the solution. The solution bridges the gap between the two extremes-the classical solutions valid only for infinitesimal deformations and the solutions form the technical theories for deformations with large rotations. The solutions may be used to confirm the technical theories and to verify numerical solutions obtained from finite element analysis.