• 한국공작기계학회논문집
• /
• 제10권5호
• /
• pp.118-123
• /
• 2001

Most structures of automobile are composed of many substructures connected to one another by various types of mechanical joints. In automotive engineering, it is important to study these connected structures under various dynamic farces for the evaluations of fatigue life and stress concentration exactly. It is rarely obtained the accurate load history of specified positions because of the errors such as modeling, measurement, and etc. In the beginning of design, exact load data are actually necessary for the fatigue strength and life analysis to minimize the cost and time of designing. In this paper, the procedure of practical dynamic load determination is developed by the combination of the principal stresses of F.E. analysis and experiment. Inverse problem and least square pseudo inverse matrix are adopted to obtain an inverse matrix of analyzed stresses matrix. Pseudo-Practical dynamic load was calculated for Lab. Test of sub-structure. GUI program(PLODAS) was developed for whole of above procedure. This proposed method could be extended to any geometric shape of structure.

• Journal of Mechanical Science and Technology
• /
• 제19권8호
• /
• pp.1611-1620
• /
• 2005

This paper shows the use of wavelet transformation combined with inverse acoustics to reconstruct the surface velocity of a noise source. This approach uses the boundary element analysis based on the measured sound pressure at a set of field points, the Helmholtz integral equations and wavelet transformation for reconstructing the normal surface velocity field. The reconstructed field can be diverged due to the small measurement errors in the case of nearfield acoustic holography (NAH) using an inverse boundary element method. In order to avoid this instability in the inverse problem, the reconstruction process should include some form of regularization for enhancing the resolution of source images. The usual method of regularization has been the truncation of wave vectors associated with small singular values, although the order of an optimal truncation is difficult to determine. In this paper, a wavelet transformation is applied to reduce the computation time for inverse acoustics and to enhance the reconstructed vibration field. The computational speed-up is achieved, with solution time being reduced to $14.5\%$.

• Communications for Statistical Applications and Methods
• /
• 제27권6호
• /
• pp.675-688
• /
• 2020

In survival analysis of observational data, the inverse probability weighting method and the Cox proportional hazards model are widely used when estimating the causal effects of multiple-valued treatment. In this paper, the two kinds of weights have been examined in the inverse probability weighting method. We explain the reason why the stabilized weight is more appropriate when an inverse probability weighting method using the generalized propensity score is applied. We also emphasize that a marginal hazard ratio and the conditional hazard ratio should be distinguished when defining the hazard ratio as a treatment effect under the Cox proportional hazards model. A simulation study based on real data is conducted to provide concrete numerical evidence.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2012년도 제38회 춘계학술대회논문집
• /
• pp.397-402
• /
• 2012

본 논문에서는 미지의 두 열물성 값인 열전도율과 열확산율을 구하기 위하여 Levenberg-Marquardt 방법에 의한 역해석 기법을 도입하였다. 일차원 열전도 문제에 대하여 연산식을 유도하였으며, 시편에 대하여 두 지점의 온도 및 입력유동의 열유속 측정값을 적용하였다. 예측된 열전도율 및 열확산율은 알려진 그라파이트 시편에 대한 열물성 값과 비교하였으며 그 결과 본 논문에서 제시된 역해석 예측 기법 실험의 유효성이 파악되었다.

• 한국멀티미디어학회논문지
• /
• 제13권8호
• /
• pp.1171-1182
• /
• 2010

본 논문에서는 특정 시점, 특정 장소의 대기 중에 발생하는 악취의 발생원을 추적하기 위한 악취분류 및 악취원 분석 방법을 제안한다. 이를 위해 악취원별 대표패턴의 생성이 필요하다. 이에 주요 악취원에서 측정한 67개의 악취를 악취 대표패턴으로 생성하였다. 또한, 여러 악취가 대기 중에서 섞였을 경우를 고려하여 2~3개의 악취들을 조합하여 복합 악취 대표패턴을 생성하였고, pseudo inverse method를 이용하여 악취에 대한 악취원들의 가중치를 계산하였다. 그 결과 해당 악취를 발생시킨 악취원들과 악취에 대한 기여도를 알아낼 수 있었다. 이러한 본 연구의 성과는 악취 관련 민원해결에 기여할 것으로 전망된다.

• 대한기계학회논문집B
• /
• 제27권1호
• /
• pp.61-68
• /
• 2003

This study deals with the use of the conjugate gradient method for the simultaneous estimation of two unknown boundary heat fluxes on the slab in reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. The heat flux estimations for three different cases of measurement locations in the slab are performed: non-skid, skid, and shift-skid zones. The estimated heat fluxes for three cases indicated the three regions having local peak values of heat fluxes. The estimated temperatures at measurement locations were in good agreements with the measured temperatures within 5% relative error.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집B
• /
• pp.254-259
• /
• 2001

This study deals with the use of the conjugate gradient method for the simultaneous estimation of two unknown boundary heat fluxes on the slab in reheating furnace. Temperature measurements by the experiment are used in the inverse analysis. The heat flux estimations for three different cases of measurement locations in the slab are performed: non-skid, skid, and shift-skid zones. The estimated heat fluxes for three cases indicated the three regions having local peak values of heat fluxes. The estimated temperatures at measurement locations were in good agreements with the measured temperatures within 5% relative error.

• Genomics & Informatics
• /
• 제14권4호
• /
• pp.173-180
• /
• 2016

The meta-analysis has become a widely used tool for many applications in bioinformatics, including genome-wide association studies. A commonly used approach for meta-analysis is the fixed effects model approach, for which there are two popular methods: the inverse variance-weighted average method and weighted sum of z-scores method. Although previous studies have shown that the two methods perform similarly, their characteristics and their relationship have not been thoroughly investigated. In this paper, we investigate the optimal characteristics of the two methods and show the connection between the two methods. We demonstrate that the each method is optimized for a unique goal, which gives us insight into the optimal weights for the weighted sum of z-scores method. We examine the connection between the two methods both analytically and empirically and show that their resulting statistics become equivalent under certain assumptions. Finally, we apply both methods to the Wellcome Trust Case Control Consortium data and demonstrate that the two methods can give distinct results in certain study designs.

• 한국수자원학회논문집
• /
• 제39권3호
• /
• pp.253-259
• /
• 2006

기존의 거의 모든 수문학적 연구에 있어서, 시스템의 특성을 파악한 뒤 예측을 실시하는 표준접근법이 채택되어왔다. 그러나 최근 들어 시스템의 특성분석에 앞서 예측을 실시하고, 상태공간 매개변수가 시스템의 특성분석단계가 아닌 예측단계에서 평가되는 가역접근법이 제안되었다. 본 연구에서는 최근에 제안된 가역접근법과 기존에 널리 적용되어온 표준접근법을 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 자료에 적용함으로써, 가역접근법의 적용성을 검토하고 카오스 시계열의 특성을 알아보았으며, 카오스이론이 적용된 비선형 예측기법으로는 부분근사화 기법을 이용하였다. 카오스 특성 분석을 통해, 이론적 카오스 시계열과 Idaho주 Bear강의 일유출량 시계열 자료 모두에서 카오스 특성이 나타남을 알 수 있었다. 200일에 대한 1, 3, 5일 예측 결과, 가역접근법이 표준접근법에 비해 우수함을 알 수 있었다.

• 한국산업융합학회 논문집
• /
• 제19권4호
• /
• pp.206-215
• /
• 2016

Delta parallel robots are now widely used for high-speed applications. However, typical Delta robots, such as ABB Flexpicker suffer from rotating axis with passive prismatic joint subjected to critical speed and so requiring careful maintenance. In this paper, a novel 4-DOF high-speed parallel robot with four legs is presented, which consists of three legs with 90 degree arrangement for translational motions and one remaining leg with rack & pinion gears for rotational motion. The inverse kinematics, velocity, acceleration, statics, and inverse dynamics have been analyzed. From the workspace analysis and inverse dynamics simulation for 0.43 sec cycle time, the 4-axis parallel robot prototype with 12kg payload has been designed. In the future research, computed torque control methods will be developed for the prototype.