• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.9
• /
• pp.164-171
• /
• 2013

XRF spectrum data of a material include a lot of background signals which are not related to its components. Since an XRF analyzer analyzes components and concentrations of an analyte using the locations and magnitudes of gaussian-shaped peaks extracted from a spectrum, its background signals need to be removed completely from the spectrum for the accurate analysis. Morphology-based method, SNIP-based method and thresholding-based method have been used to remove background signals. In the paper, a background removal method, an improved version of an interval-thresholding-based method, is proposed. The proposed method consists of interval partitioning, interval classifying, and background estimation. Experimental results show that the proposed method has better performance on background removal from the spectrum than the existing methods, morphology-based method and SNIP-based method.

• Korean Journal of Remote Sensing
• /
• v.24 no.4
• /
• pp.341-349
• /
• 2008

This study proposes new automatic thresholding method, which is important step for detecting binary change/non-change information using satellite images. Result value through pixel-based similarity measurement is calculated cumulatively with regular interval, and thresholding is pointed at the steep slope position. The proposed method is assessed in comparison with expectation-maximization algorithm and coner method using synthetic images, ALI images, and Hyperion images. Throughout the results, we validated that our method can guarantee the similar accuracy with previous algorithms. It is simpler than EM algorithm, and can be applied to the binormal histogram unlike the coner method.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.4 no.3
• /
• pp.190-196
• /
• 2009

A new time adapted threshold using the standard deviations of Wavelet coefficients after Wavelet transform by frame scale is proposed. The time adapted threshold is set up using the sum of standard deviations of Wavelet coefficient in level 3 approximation and weighted level 1 detail. Level 3 approximation coefficients represent the voiced sound with low frequency and level 1 detail coefficients represent the unvoiced sound with high frequency. After reducing noise by soft thresholding with the proposed time adapted threshold, there are still residual noises in silent interval. To reduce residual noises in silent interval, a detection algorithm of silent interval is proposed. From simulation results, it can be noticed that SNR and MSE of the proposed algorithm are improved than those of Wavelet transform and than those of Wavelet packet transform.

• Journal of the Korea Computer Industry Society
• /
• v.6 no.2
• /
• pp.271-278
• /
• 2005

This paper proposed a new time adapted threshold using the standard deviations of Wavelet coefficients after Wavelet transform by frame scale. The time adapted threshold is set up using the sum of standard deviations of Wavelet coefficient in level 3 approximation and weighted level 1 detail. Level 3 approximation coefficients represent the voiced sound with low frequency and level 1 detail coefficients represent the unvoiced sound with high frequency. After reducing noise by soft thresholding with the proposed time adapted threshold, there are still residual noises in silent interval. To reduce residual noises in silent interval, a detection algorithm of silent interval is proposed. From simulation results, it is demonstrated that the proposed algorithm improves SNR and MSE performance more than Wavelet transform and Wavelet packet transform does.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2015.10a
• /
• pp.513-515
• /
• 2015

본 논문에서는 다양한 영상에서 객체들의 정보 손실을 최소화한 상태에서 영상을 이진화하기 위해 ${\alpha}-cut$을 동적으로 설정하는 개선된 퍼지 이진화 방법을 제안한다. 제안된 퍼지 이진화 방법은 평균 밝기 값을 기준으로 가장 어두운 픽셀 값과 가장 밝은 픽셀 값의 거리를 계산하여 소속 함수의 구간을 설정한다. 그리고 소속 함수에서 소속도를 구한 후, 영상을 이진화 하기 위해 최대 밝기 값에서 중간 밝기 값을 나눈 값을 ${\alpha}-cut$값으로 설정한 후에 구간 임계치를 이용하여 영상을 이진화 한다. 제안된 퍼지 이진화 방법의 효율성을 확인하기 위해 다양한 영상을 대상으로 실험한 결과, 기존의 퍼지 이진화 방법보다 객체와 배경 사이의 명암도가 한쪽에 치우친 분포를 가진 영상과 넓게 분포된 영상에서 모두 객체들의 정보의 손실이 적은 상태에서 이진화되는 것을 확인할 수 있었다.

• Journal of Biosystems Engineering
• /
• v.33 no.5
• /
• pp.317-325
• /
• 2008

The electrocardiogram (ECG) measurement system consists of I/O interface to input the ECG signals from two electrodes, FPGA (Field programmable gate arrays) module to process the signal conditioning, and real time module to control the system. The algorithms based on wavelet transform were developed to remove the noise of the ECG signals and to determine the QRS-waves. Triangular wave tests were conducted to determine the optimal factors of the wavelet filter by analyzing the SNRs (signal to noise ratios) and RMSEs (root mean square errors). The hybrid rule, soft method, and symlets of order 5 were selected as thresholding rule, thresholding method, and mother wavelet, respectively. The developed wavelet filter showed good performance to remove the noise of the triangular waves with 10.98 dB of SNR and 0.140 mV of RMSE. The ECG signals from a total of 6 subjects were measured at different measuring postures such as lying, sitting, and standing. The durations of QRS-waves, the amplitudes of R-waves, the intervals of RR-waves were analyzed by using the finite impulse response (FIR) filter and the developed wavelet filter. The wavelet filter showed good performance to determine the features of QRS-waves, but the FIR filter had some problems to detect the peaks of Q and S waves. The measuring postures affected accuracy and precision of the ECG signals. The noises of the ECG signals were increased due to the movement of the subject during measurement. The results showed that the wavelet filter was a useful tool to remove the noise of the ECG signals and to determine the features of the QRS-waves.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.338-345
• /
• 2008

Steel bearing balls are important component in machines having moving parts. In this paper we describe a vision-based automatic inspection system designed for sensing defects on the surface of steel bearing balls. The system has a camera looking down over a rail on which balls roll. Two mirrors are installed at both sides of the rail so that the side parts of a ball can be well inspected. The entire ball surface can be sufficiently seen by taking three images at $120^{\circ}$ rotation interval. Defects are detected by thresholding the difference image between an image captured and the reference image of a good ball.

• Journal of Satellite, Information and Communications
• /
• v.9 no.4
• /
• pp.1-6
• /
• 2014

Color image processing based on smoke detection is suitable detecting target to early detection of fire smoke. A method for detecting the smoke is processed in the pre-processing movement and color. And Next, characteristics of smoke such as diffusion, texture, shape, and directionality are used to post-processing. In this paper, propose the detection method of density distribution characteristic in characteristics of smoke. the generate a candidate regions by color thresholding image in Detecting the movement of smoke to the 10Frame interval and accumulated while 1second image. then check whether the pattern of the smoke by candidate regions to applying OBTP(Object Block Ternary Pattern). every processing is Block-based processing, moving detection is decided the candidate regions of the moving object by applying an adaptive threshold to frame difference image. The decided candidate region accumulates one second and apply the threshold condition of the smoke color. make the ternary pattern compare the center block value with block value of 16 position in each candidate region of the smoke, and determine the smoke by compare the candidate ternary pattern and smoke ternary pattern.

• Journal of Korea Multimedia Society
• /
• v.14 no.5
• /
• pp.607-613
• /
• 2011

In this paper, we propose a hand image segmentation method using the dynamic threshold values on input images with various lighting and background attributes. First, a moving hand silhouette is extracted using the camera input difference images, Next, based on the R,G,B histogram analysis of the extracted hand silhouette area, the threshold interval for each R, G, and B is calculated on run-time. Finally, the hand area is segmented using the thresholding and then a morphology operation, a connected component analysis and a flood-fill operation are performed for the noise removal. Experimental results on various input images showed that our hand segmentation method provides high level of accuracy and relatively fast stable results without the need of the fixed threshold values. Proposed methods can be used in the user interface of mixed reality applications.