• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.22 no.2
• /
• pp.79-87
• /
• 2010

This is the first of the two papers dealing with reliability analyses for external and internal stability of a quay wall constructed on a special foundation. A new practical reliability analysis method is proposed in this paper to evaluate the quantitative risk associated with external stability of a quay wall constructed on the deep cement mixed ground. The method can consider uncertainties in various design variables. For the risk estimation to external stability of the improved soil-quay wall, three corresponding limit state functions of sliding, overturning and bearing capacity are fully defined by introducing concept of the secondary random variable. Three representative reliability methods, MVFOSM, FORM and MCS are then applied to evaluate the failure probabilities of the three limit state functions explicitly expressed in terms of the basic and secondary random variables. From the reliability analysis results, the failure probabilities obtained from the three approaches are very close to each other, and the sliding failure mode appears to be the most critical when the earthquake loading is under consideration.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.71-78
• /
• 2015

Purpose - This study attempts to analyze whether or not there are characteristics among the top management of companies that promote corporate performance at venture companies. It investigates the characteristics of the human and social capital that are inherent in top management at a venture company and conducts an empirical analysis of hypotheses examining if these characteristics will affect utilization of the governmental R&D support system as well as affect the firm's initial success. Research design, data, and methodology - This study conducted theoretical and empirical research together to accomplish the goal of the study. The pilot study researched human capital and social capital as the independent variables; the governmental R&D support system as the parameter; and, the initial success as the dependent variable. The empirical study carried out research on the model, establishment of hypotheses, and the statistical treatment. A survey was conducted targeting top management of high-tech venture companies in Daedeok Innopolis; 500 questionnaires were distributed; and, 222 were collected. Results - The human and social capital inherent in top management at venture companies in the early stages of their existence become good evaluation data for those who are invested in similar resources. If top management includes strong human and social capital, access to external resources will be easier; these will have a positive influence on the selection of overnmental support systems; and, this proper support will also have a positive influence on the initial success of the venture company. The results revealed the following. First, it was found that when the educational level and functional background, (the top management human capital), are the output function, top management human capital had a significant influence on selection of governmental R&D support funds. Second, it was found that the internal social capital and external social capital, (the top management social capital), had a significant influence on selection of governmental R&D support tasks. Third, it was found that selection of the governmental R&D support tasks at the start of the venture company had a positive influence on the corporate financial performance such as sales, business profits, and the increase in workers; and, had a significant influence on nonfinancial performance such as market share, competitive position, product competitiveness, and the future product development. Conclusions - Selection of the governmental R&D support system is not recognized as part of the direct sales of a venture company in its early stages, but as it can reduce costs for technical development and helps significantly in creating test products and mass production, it has a positive influence on the company's financial performance and nonfinancial performance as a result. Therefore, companies should take great efforts to frequently be selected as a candidate in the governmental R&D support system, as it can help facilitate R&D that requires extensive funds. As a result, companies can expect effects such as job creation and patent applications and they can advance future product sales.

• Journal of Distribution Science
• /
• v.13 no.6
• /
• pp.105-118
• /
• 2015

Purpose - Currently, strengthening small and medium-sized enterprises (SME) in terms of competitiveness is a key economic issue. However, the problem is that many SMEs lack the internal competence required to cope with a rapidly changing market structure. Such problems can act as an obstacle to economic development, yet most SMEs in Korea are dealing with this problem today. A company's source of competitive advantage is changing from quantity to quality, facility to knowledge, and hardwork to creativity. Under such circumstances, a company should place learning and sharing of knowledge and continuously creating new knowledge as its priority. This study aims to identify the effect of a chief executive officer's (CEO) compassion and forgiveness - positive factors in organizational emotion - on learning organization activities and organizational performance, through a theoretical comparison. Research design, data, and methodology - For this study, SMEs based in Daejeon and Chungcheong area were selected. To secure credibility of the data, the subjects were selected among those who have been working at the business for six months or longer. The survey was conducted for 30 days from March 5, 2015 to April 5, 2015. Both offline and online surveys were conducted. Fifty companies were chosen and 700 questionnaires were distributed, with 506 used for analysis. Fifty subject companies (25 from Daejeon, 10 from Chungnam, 10 from Chungbuk, and five from Sejong) were selected and the objective, target, and survey content were explained to a manager at each company either face-to-face or on the phone. Of the total of 700 questionnaires distributed via mail or e-mail, 78.6% or 550 copies were returned. Excluding 44 insufficient questionnaires, the remainder, 506 questionnaires, were used for analysis. Results - This study analyzed how the CEO's compassion and forgiveness affects learning organization activities and organizational performance. First, compassion of the CEO at the SMEs directly affected the learning organization activities and indirectly affected the organizational performance. Second, forgiveness of the CEO at the SMEs did not affect the learning organization activities and organizational performance directly or indirectly. Conclusions - The study conclusions are as follows. First, CEO compassionate behavior at the SMEs was a significant variable that directly and indirectly affected learning organization activities and organizational performance. Therefore, the CEO of an SME can create a positive organizational atmosphere through compassionate behaviors in the organization. Second, the forgiving behavior of the CEO did not have direct or indirect effects on learning organization activities and organizational performance. However, the reason for a CEO to continue his or her forgiving behavior is because it strengthens employee resilience, commitment, and self-efficacy to protect the organization from negative influences such as layoffs, risks, and wrongdoings. The action of forgiveness does not have direct or indirect effects. However, the CEO shall continue such behavior to strengthen members' physiological resilience, commitment, and self - effectiveness, and to protect the organization from risks including layoff and external negative factors.

• Economic and Environmental Geology
• /
• v.15 no.1
• /
• pp.41-47
• /
• 1982

Typical stratigraphic sequences of Paleozoic form the Baegunsan Syncline (equal to Hambaeg Syncline) and Taebaegsan Group is the basement in the southern part of Kangweon Province. Deformation pattern depends on their stratigraphic site and their internal properties. In the biotite schists and meta-sandstones of Pre-Cambrian sequences, flow folds and ptygmatic folds are developed, and high strain deformation is pervasive. Deformational patterns of Cambro-Ordovician are variable because of their various formations. Fracturing is pervasive in the Jangsan Quartzite and Daegi and Maggol Limestone. Welldeveloped slaty cleavage and angular folds of kink and chevron types are the prevailing structures of pelitic rocks. The most characteristic feature of limestone alternated with argillite is the "Compositional cleavage (Author's proposal)" known as the "Worm-eatern" structures. It was known that this structures have a sedimentary origin. But their preferred orienation of long axis of erosional lime holes, originated from tectonic deformation of folding. And this structures have the same character as the axial plane cleavages. Fracturing and long wave concentric folds are dominant characters of the Upper Paleozic sequences. In this area, two folds are superimposed. Field studying and analysis of structures show that the cross-folds of NS-direction are pervasive and were deformed by the EW-directional Baegunsan Syncline. The cross-folding is the major and penetrative deformation and prior to Baegunsan Syncline.

• Clinics in Shoulder and Elbow
• /
• v.16 no.2
• /
• pp.130-134
• /
• 2013

A painful pseudoarthrosis will develop due to a delay in diagnosis and treatment, and surgical care is required. Treatment of pseudoarthrosis is really difficult because the acromion is a thin flat bone that is difficult to be fixed firmly. A 52-year-old woman with multiple trauma had an acromial fracture that was not detected until it had caused pain after ambulation. Open reduction and internal fixation with a variable angle locking compression plate for distal radius and autogenous iliac bone graft were performed. At nine months after the operation, there was partial tear in the supraspinatus tendon, and arthroscopic repair of the supraspinatus tendon was performed. At nine months after the operation, radiographs showed a complete union. At three months after tendon repair, the patient had excellent function of the shoulder. We have reported a case of a successful treatment of nonunion and pseudoarthrosis of acromial fracture that is difficult to be fixed.

• Journal of the Korean Geotechnical Society
• /
• v.28 no.8
• /
• pp.21-29
• /
• 2012

At-rest lateral stress coefficient that is used for the evaluation of geotechnical structures such as foundations and retaining walls plays a significant role in the analysis and design, as a state variable of in-situ stress condition. In the widely applied Jaky's Ko equation stress condition can be inferred from the internal friction angle obtainable from the laboratory experimentation whereas the eguation mares it challenging to evaluate the influences and criteria of particle characteristics which is essential for the application of friction angles in practices. Thus, this study experimentally explored the behaviors of Ko depending on the relative density, particle shape, and surface roughness effect during a range of loading stages. The Ko values of Jumumjin sand, glass beads, and etched glass beads were measured using a customized Ko device housing strain gauges during loading-unloading-reloading steps, and the effect of dominant factors on Ko is analyzed. Results show that the high Ko prevails for both round and angular specimens with low relative density and the surface roughness has a nominal effect. The angular particles exhibit low Ko for specimens with similar relative density. The characteristics of relevance between Ko and friction angles with varying relative density are also investigated based on the experimental results using empirical correlations and previously reported values.

• Imaging Science in Dentistry
• /
• v.34 no.3
• /
• pp.151-157
• /
• 2004

Purpose : To evaluate the quantitative accuracy of three-dimensional (3D) images by means of comparing distance measurements on the 3D images with direct measurements of dry human skull according to slice thickness and scanning modes. Materials and Mathods : An observer directly measured the distance of 21 line items between 12 orthodontic landmarks on the skull surface using a digital vernier caliper and each was repeated five times. The dry human skull was scanned with a Helical CT with various slice thickness (3, 5, 7 mm) and acquisition modes (Conventional and Helical). The same observer measured corresponding distance of the same items on reconstructed 3D images with the internal program of V-works 4.0/sup TM/(Cybermed Inc., Seoul, Korea). The quantitative accuracy of distance measurements were statistically evaluated with Wilcoxons' two-sample test. Results: 11 line items in Conventional 3 mm, 8 in Helical 3mm, 11 in Conventional 5mm, 10 in Helical 5mm, 5 in Conventional 7mm and 9 in Helical 7mm showed no statistically significant difference. Average difference between direct measurements and measurements on 3D CT images was within 2mm in 19 line items of Conventional 3mm, 20 of Helical 3mm, 15 of Conventional 5mm, 18 of Helical 5mm, II of Conventional 7mm and 16 of Helical 7mm. Conclusion: Considering image quality and patient's exposure time, scanning protocol of Helical 5mm is recommended for 3D image analysis of the skull in CT.

• Korean Journal of Plant Resources
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2010

Taxa of Artemisia collected in Korea were constructed by molecular phylogenetic analysis based on the internal transcribed spacer(ITS) regions of nrDNA. The length of the ITS sequences aligned using the clustal X program was 636~643 bp, and the lengths of the ITS1 and ITS2 regions were 251~255 bp and 217~222 bp, respectively. The total number of variable sites was 95 for the entire sequence, and a parsimony- informative site represented an efficacious site in ITS1 rather than in ITS2. The maximum parsimony tree as calculated by the MEGA 4 program was clustered into five clades. The taxa(A. capillaris, A. japonica var. japonica, A. japonica var. hallaisanensis, A. japonica subsp. littoricora) degenerated ovary of clade 1 was supported as the subgenus Dracunculus by Ling's classification system. The results show that A. nakaii and A. fukudo were quite similar genetically(Boostrap 99%) and that the scientific name of Korean A. dubia should be reconsidered. A. sp. distributed in Ganghwa province was grouped with A. argyi(Boostrap 89%). These results suggest that the molecular techniques used in this study could be useful for the phylogenetic analysis of Korean Artemisia herbs having variations in their morphological characteristics.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2011.06a
• /
• pp.89-90
• /
• 2011

The purposes of this study were to analyze the effects of a marine leisure exhibition event(MLEE)'s appraisal attributes on visitors' satisfaction and repurchase behavior and thus provide fundamental information that facilitates developing effective marketing and operational strategies for a MLEE. In order to accomplish such purposes, this study employed a survey with a total of 300 visitors to a MLEE hosted by G Province. Questionnaires were developed on the basis of related studies and modified to reflect the study context. Then, such questionnaires were verified to be valid and reliable through content validity, exploratory factor analysis and internal consistency analysis. Valid 286 questionnaires were analyzed with correlation analysis and multiple regression analysis on significance level of .05. Following findings were derived from current study. First of all, the appraisal attributes of a MLEE had a significant effect on visitors' satisfaction and among them only the factor of event program had a unique relation with the levels of satisfaction. In addition, the appraisal attributes of the MLEE also had a significant effect on visitors' repurchase behavior and among them event program, transportation and employee factors had unique relations with the performance variable in order. In conclusion, all the research hypotheses that had been set up through previous studies were confirmed in this study.

• Biomedical Science Letters
• /
• v.25 no.4
• /
• pp.426-430
• /
• 2019

Currently, molecular diagnostic assays based on nucleic acid amplification tests have been shown to effectively detect mycobacterial infections in various types of specimen, however, variable sensitivity was shown in FFPE samples according to the kind of commercial kit used. The present study therefore used automated PCR-reverse blot hybridization assay (REBA) system, REBA Myco-ID HybREAD 480^®, for the rapid identification of Mycobacterium species in various types of human tissue and compared the conventional one-tube nested-PCR assay for detecting Mycobacterium tuberculosis (MTB). In conventional nested-PCR tests, 25 samples (48%) were MTB positive and 27 samples (52%) were negative. In contrast, when conducted PCR-REBA assay, 11 samples (21%) were MTB positive, 20 samples (39%) were NTM positive, 8 samples (15%) were MTB-NTM double positive, and 13 samples (25%) were negative. To determine the accuracy and reliability of the two molecular diagnostic tests, the one-tube nested-PCR and PCR-REBA assays, were compared with histopathological diagnosis in discordant samples. When conducted nested-PCR assay, 10 samples (59%) were MTB positive and seven samples (41%) were negative. In contrast, when conducted PCR-REBA test, three samples (17%) were MTB positive, 10 samples (59%) were NTM positive and four samples (24%) were negative. In conclusion, the automated PCR-REBA system proved useful to identify Mycobacterium species more rapidly and with higher sensitivity and specificity than the conventional molecular assay, one-tube nested-PCR; it might therefore be the most suitable tool for identifying Mycobacterium species in various types of human tissue for precise and accurate diagnosis of mycobacterial infection.