• Fire Science and Engineering
• /
• v.33 no.5
• /
• pp.149-154
• /
• 2019

The stability of firefighting pipes is crucial in the event of an earthquake. In Korea, specification-based designs are used in accordance with NFSC. However, engineering performance-based designs are used for buildings that have special requirements. For firefighting pipes, tree type pipe networks are usually utilized in buildings; however, they are characterized by several limitations. Hence, grid type and loop type networks are being utilized lately. Earthquake-resistant designs for firefighting pipes in Korea utilize NFPA 13 as the cookbook. Nevertheless, an engineering analysis is required to verify its reliability. The NFPA 13 standard used in Korea is a design method for engineers who lack earthquake engineering analysis knowledge of pipes and adapt ASCE and ASME guidelines. Earthquake resistant designs in Korea review braces only. Hence, various analyses under load conditions, such as the internal pressure of a pipe, force exerted by a continuous load, and an earthquake, are required to ensure reliability. An engineering earthquake-resistance analysis showed that tree type pipe networks are less stable than grid and loop type pipe networks. A comparison of earthquake-resistance analysis based on stress and strain revealed that strain analysis exhibited a conservative result value in the range of over-stress. Therefore, for the earthquake-resistance analysis of pipes, it is rational that engineers perform analysis to achieve the required standards through engineering analysis rather than uniform calculations, which should also be analyzed considering various analysis conditions.

• Journal of Radiation Protection and Research
• /
• v.40 no.2
• /
• pp.92-100
• /
• 2015

For the purpose of improving the efficiency of the radiation impact assessment of dry interim storage facilities for the spent nuclear fuel of pressurized water reactors (PWRs), radiation impact assessment was performed after the application of sensitivity assessment according to the radiation source term designation method, development of a 2-step calculation technique, and cooling time credit. The present study successively designated radiation source terms in accordance with the cask arrangement order in the shielding building, assessed sensitivity, which affects direct dose, and confirmed that the radiation dosage of the external walls of the shielding building was dominantly affected by the two columns closest to the internal walls. In addition, in the case in which shielding buildings were introduced into storage facilities, the present study established and assessed the 2-step calculation technique, which can reduce the immense computational analysis time. Consequently, results similar to those from existing calculations were derived in approximately half the analysis time. Finally, when radiation source terms were established by adding the storage period of the storage casks successively stored in the storage facilities and the cooling period of the spent nuclear fuel, the radiation dose of the external walls of the buildings was confirmed to be approximately 40% lower than the calculated values; the cooling period was established as being identical. The present study was conducted to improve the efficiency of the Monte Carlo shielding analysis method for radiation impact assessment of interim storage facilities. If reliability is improved through the assessment of more diverse cases, the results of the present study can be used for the design of storage facilities and the establishment of site boundary standards.

• KDI Journal of Economic Policy
• /
• v.14 no.2
• /
• pp.155-187
• /
• 1992

The Korean economy has sustained high growth rate for almost three decades, that have been associated with the rapid expansion of manufacturing industries. In the beginning stage of development, the high growth of the Korean economy has been based on improvements in productivity obtained by the economies of scale. In that period, the improvements in productivity could be secured by the economies of scale in the export-oriented industries which are the labor- and material-intensive industries. In the latter half of the 1980s, the Korean economy went through rapid transition. Now Korea is at another juncture in its development process, where economic restructuring is critical to sustain high growth. However, economic restructuring in the 1990s call for much more concerted effort than before, since changes in internal and external conditions have profoundly altered the environment for economic development. If Korea is to sustain high growth in the 1990s, it has to promote balanced economic and social development in coordination with the smooth facilitation of industrial restructuring. There are no inherent conflicts among the issues involved, so they can be resolved by restructuring the economy to facilitate, in a global context, the development of knowledge- and technology-intensive activities and to ensure that the benefts of growth are reflected of qualitative improvements in national living standards. In this paper, we examined a scenario of structural changes using a mid- and long-term multisector model, in order to understand the conditions needed for realizing the growth potential. This examination explains the important features of the development course and policy directions that will help sustain high growth in the 1990s.

• Journal of Korean Academy of Nursing
• /
• v.13 no.3
• /
• pp.1-33
• /
• 1983

The role and function of nursing care nowadays, tend to acquire sophisicated technology because specialization has expended due to increase of the medical population and the improvement of national health standards. To implement nursing care independently as a professional nurse, the apprehension of specific knowledge and skill should be acquired during basic nursing education. So it is important for nursing education not only to include theory and actual techniques, but also to strengthen the practical training in the actual clinical setting. This study was carried out with the following objectives; 1. To survey the detailed content and frequency of actual nursing students display during their clinical training. 2. To investigate the detailed content and frequency of actual nursing behavior which students display in each clinical a area. 3. To identify the motive for selection of nursing as their major and to determine the degree of self confidence, extent of knowledge and recognition of nursing responsibility. 4. To observe the relationship between actual nursing behavior and each of the following; 1) Motive for selecting nursing as a major 2) Self confidence 3) Knowledge of nursing care 4) Recognition of nursing responsibility The conclusions of this study were as follows; 1. Among the detailed nursing behavior which junior nursing college students carry out in clinical training; taking respiration's showed the highest frequency, and taking body temperatures, blood pressures, and pulses and making beds were next in frequency in this order. 2. In detailed nursing behaviors according to clinical area; taking vital signs showed the highest frequency in the emergency room, pediatric ward, orthopedic ward, general surgical ward and internal medicine ward. However, in the operating room, assisting with endotracheal tube insertion and sterile techniques were showen to have the highest frequencies. In nursery, umbilical cord care and the measurement of body weight were the highest in frequency In neurosurgical ward, the measurement of vital signs, changing position and tracheostomy care were the highest in frequency. In obstetric and gynecological ward and in the delivery room, checking duration, intensity and frequency of contractions was the highest in frequency. 3. In regard to the motive for majoring in nursing, the aptitude and interest of the student had the highest percentage(32.86%), and self-confidence in nursing activities (M=3.36), knowledge in nursing activities.(M=3. 09), and the recognition of the nursing activity (M= 3.76) wire in the middle range. 4. When the detailed nursing behaviors were compared with motive, self confidence, knowledge and recognition, it was found that when the nursing behavior was difficult and regarding much endeavor although the motive was high, the frequency of the nursing behavior was rather low. But in the cases in which there was much self confidence and a high level of skill was required, nursing behavior was carried more frequently. When there was muck self confidence and skill was not required, the frequency of nursing behavior was rather low. In the cases of a high level of knowledge, the frequency of nursing behavior was low and when recognition for nursing behavior was given the frequency of nursing behavior was low.

• Journal of Life Science
• /
• v.26 no.6
• /
• pp.651-656
• /
• 2016

Bee pollen is produced by honeybees and is considered one of the most balanced and nourishing nutritional supplements available. Historically, bee pollen has been prescribed for its healing properties and consumed for its high-energy supply. Recent research has provided evidence that bee pollen has diverse biological activities, such as anti-oxidant, anti-inflammatory, anti-bacterial, and even anti-cancer effects. However, the outer membrane of the pollen grain, exine, is highly resistant to most acidic solutions, high pressure, and even digestive enzymes, and the resulting low bioavailability limits its nutritional and clinical applications. This study applied a wet-grinding method to destroy the exine effectively, and it then examined the pollen's enhanced biological activity. First, microscopic observations provided strong evidence that wet grinding destroyed the exine time-dependently. In addition, the content of polyphenols, well-known ingredients of bee pollen and used as internal standards for the quality control of commercial pollen preparations, increased up to 11-fold with wet grinding. Further, the anti-oxidant activity demonstrated on the ABTS anti-oxidant assay, as well as the DPPH radical scavenging assay, was also dramatically increased. Together, the results presented here support a new technology by which bee pollen can be used as a resource for medical, nutritional, and cosmetic applications.

• The Korean Journal of Applied Statistics
• /
• v.6 no.2
• /
• pp.201-215
• /
• 1993

The health status of workers in a foundry was analyzed in a study which consisted of evaluations of respiratory health together with environmental measurements. The results from environmental measurements showed values exceeding permissible exposure limits. A t-test was done with log transformed and untransformed data to examine the statistical significance for the noncompliance with exposure standards. For the analysis of categorical health outcomes, $\chi$-square test with 2 $\times$ 2 tables and logistic regression analysis were employed. For continuous variables, multiple linear regression was done against assessed risk factors. Pros and cons of different parameters in the compliance (or noncompliance) testing were presented. Respiratory function did not show any relation with occupational exposures, which may be due to the healthy worker effects. Strategies for controlling time dependent covariates were discussed in relation to the healthy worker effect. The scope of statistical analysis in occupational health studies is still limited in Korea without a suitable external comparison group such as credible vital statistics for the whole nation. Internal comparisons between different exposure status often result in unstable estimates of effect, and proportional morbidity study is discussed as an alternative potential research tool.

• Journal of The Korean Society of Inherited Metabolic disease
• /
• v.3 no.1
• /
• pp.86-93
• /
• 2003

Background : The SCL began screening of newborns and high risk group blood spots with tandem mass spectrometry (MS/MS) in April 2001. Our goal was to determine approximate prevalence of metabolic disorders, optimization of decision criteria for estimation of preventive effect with early diagnosis. This report describes the ongoing effort to identify more than 30 metabolic disorders by MS/MS in South Korea. Methods : Blood spot was collected from day 2 to 30 (mostly from day 2 to 10) after birth for newborn. Blood spot of high risk group was from the pediatric patients in NICU, developmental delay, mental retardation, strong family history of metabolic disorders. One punch (3.2 mm ID) of dried blood spots was extracted with $150{\mu}L$ of methanol containing isotopically labelled amino acids (AA) and acylcarnitines (AC) internal standards. Butanolic HCl was added and incubated at $65^{\circ}C$ for 15 min. The butylated extract was introduced into the inlet of MS/MS. Neutral loss of m/z 102 and parent ion mode of m/z 85 were set for the analyses of AA and AC, respectively. Diagnosis was confirmed by repeating acylcarnitine profile, urine organic acid and plasma amino acid analysis, direct enzyme assay, or molecular testing. Results : Approximately 31,000 neonates and children were screened and the estimated prevalence (newborn/high risk group), sensitivity, specificity and recall rate amounted to 1:2384/1:2066, 96.55%, 99.98%, and 0.73%, respectively. Confirmed 28 (0.09%) multiple metabolic disorders (newborn/high risk) were as follows; 13 amino acid disorders [classical PKU (3/4), BH4 deficient-hyperphenylalaninemia (0/1), Citrullinemia (1/0), Homocystinuria (0/2), Hypermethioninemia (0/1), Tyrosinemia (1/0)], 8 organic acidurias [Propionic aciduria (2/1), Methylmalonic aciduria (0/1), Isovaleric aciduria (1/1), 3-methylcrotonylglycineuria (1/0), Glutaric aciduria type1 (1/0)], 7 fatty acid oxidation disorders [LCHAD def. (2/2), Mitochondrial TFP def. (0/1), VLCAD def. (1/0), LC3KT def. (0/1). Conclnsion : The relatively normal development of 10 patients with metabolic disorders among newborns (except for the expired) demonstrates the usefulness of newborn screening by MS/MS for early diagnosis and medical intervention. However, close coordination between the MS/MS screening laboratory and the metabolic clinic/biochmical geneticists is needed to determine proper decision of screening parameters, confirmation diagnosis, follow-up scheme and additional tests.

• Journal of Technology Innovation
• /
• v.27 no.2
• /
• pp.1-36
• /
• 2019

In line with the international community's movement to reduce greenhouse gas emission, Korea implemented FIT(Feed in Tariff) in 2002 as part of its renewable energy development project. Although the policy had shifted to full-scale RPS(Renewable Portfolio Standards) in 2012, policymakers are still seeking changes due to policy ineffectiveness. While previous studies explain sudden policy changes through external factors, recent research sheds light on internal factors in the process of policy transition. The purpose of this study is to investigate the factors that are responsible for rapidly changing policies in latecomer nations. In order to find this, we look at the case of transition from the FIT to the RPS in Korea's expansion of renewable energy policy. As a result of the research, it is confirmed that the Top-Down decision making system of Korea and the external regulatory change cause rapid policy transition. By looking at these variables, we propose useful implications for policymakers to minimize the policy failure in future policy design and evolution.

• Korean Journal of Heritage: History & Science
• /
• v.47 no.3
• /
• pp.146-159
• /
• 2014

After inspecting ground surface or excavating cultural heritage site, the government can take measures for the preservation of buried cultural heritage based on the related law. It means that the provisions complement the limitation of current cultural heritage management system by extending the scope of cultural heritage to be preserved. But we neither have set any matters about implementing the measures for preservation of the buried cultural heritage, nor manage the heritage and its surroundings after implementing the measures. Due to these insufficiency of the law, there arise several problems in the field. For example, the measures for preservation are not complete, or preserved cultural heritage is damaged due to inappropriate management. We have to resolve the problems in order to accomplish the original purpose of taking measures for preservation of the heritage. First, it is necessary to make sure of the legal status of preserved buried cultural heritage, to establish the standards to decide whether to preserve it or not. We need to have regulations by law or internal rule on the daily management, who should manage it, what and how the manager should manage. It is also important for local residents to take an active part in preserving and utilizing the cultural heritage as the owner. Through building up the foundation mentioned above, the meaning and value of preserved buried cultural heritage can be expanded widely.

• Korean Journal of Optics and Photonics
• /
• v.33 no.5
• /
• pp.218-229
• /
• 2022

We have investigated reliable inspection methods for finding the defects generated during the manufacturing process of lightweight, large-aperture satellite telescope mirrors using silicon carbide, and we have measured the basic physical properties of the mirrors. We applied the advanced ceramic material (ACM) method, a combined method using liquid-silicon penetration sintering and chemical vapor deposition for the carbon molded body, to manufacture four SiC mirrors of different sizes and shapes. We have provided the defect standards for the reflectors systematically by classifying the defects according to the size and shape of the mirrors, and have suggested effective nondestructive methods for mirror surface inspection and internal defect detection. In addition, we have analyzed the measurements of 14 physical parameters (including density, modulus of elasticity, specific heat, and heat-transfer coefficient) that are required to design the mirrors and to predict the mechanical and thermal stability of the final products. In particular, we have studied the detailed measurement methods and results for the elastic modulus, thermal expansion coefficient, and flexural strength to improve the reliability of mechanical property tests.