• Earthquakes and Structures
• /
• v.15 no.6
• /
• pp.687-699
• /
• 2018

This paper investigates the pseudo-static analysis of reinforced slopes with geosynthetics under the influence of the uniform surcharge to evaluate the maximum tensile force of reinforcements. The analytical approach has basically been used to develop the new practical procedure to estimate both tensile force and its distribution in the height of the slope. The base of developed relationships has been adapted from the conventional horizontal slice method. The limit equilibrium framework and the assumptions of log-spiral failure surface have directly been used for proposed analytical approach. A new analytical approach considering a single layer of non-cohesion soil and the influence of uniform surcharge has been extracted from the 5n equation and 5n unknown parameters. Results of the proposed method illustrated that the location of the surcharge, amount of internal friction and the seismic coefficient have the remarkable effect on the tensile force of reinforcement and might be 2 times increasing on it. Furthermore, outcomes show that the amount of tensile force has directly until 2 times related to the amount of slope angle and its height range. Likewise, it is observed that the highest value of the tensile force in case of slope degree more than 60-degree is observed on the lower layers. While in case of less degree the highest amount of tensile force has been reported on the middle layers and extremely depended to the seismic coefficient. Hence, it has been shown that the tensile force has increased more than 6 times compared with the static condition. The obtained results of the developed procedure were compared with the outcomes of the previous research. A good agreement has been illustrated between the amount results of developed relationships and outcomes of previous research. Maximum 20 and 25 percent difference have been reported in cases of static and seismic condition respectively.

• Journal of Mushroom
• /
• v.19 no.1
• /
• pp.66-70
• /
• 2021

We monitored the occurrence of fungal species on bed-logs inoculated with oak mushroom (Lentinula edodes) and the environmental conditions of temperature and humidity in the cultivation houses during monsoon. Six fungal species, viz., Cladosporium sp., C. cladosporioides, C. anthropophilum, Pleosporales sp., Trichoderma harzianum, and Acremonium sp., wereidentified from the cultivation houses located in Jangheung, Jeonnam province. This identification was confirmed by performing nucleotide sequence analysis of the internal transcribed spacer and 28S rDNA regions. Our study presents significant findings that can help in preventing fungal damage induced by inappropriate temperature and humidity in oak mushroom cultivation houses.

• Parasites, Hosts and Diseases
• /
• v.60 no.5
• /
• pp.327-338
• /
• 2022

This study determined the recent status and trend of Pneumocystis jirovecii pneumonia (PcP) in the non-human immunodeficiency virus (HIV) (non-HIV-PcP) and HIV (HIV-PcP) infected populations using data from the Health Insurance Review & Assessment Service (HIRA) and the Korea Disease Control and Prevention Agency (KDCA). SaTScan and Join-point were used for statistical analyses. Non-HIV-PcP cases showed an upward trend during the study period from 2010 to 2021, with the largest number in 2021 (551 cases). The upward trend was similar until 2020 after adjusting for the population. Seoul had the highest number of cases (1,597) in the non-HIV-PcP group, which was the same after adjusting for the population (162 cases/1,000,000). It was followed by Jeju-do (89 cases/1,000,000). The most likely cluster (MLC) for the non-HIV-PCP group was Seoul (Relative Risk (RR)=4.59, Log Likelihood Ratio (LLR)=825.531), followed by Jeju-do (RR=1.59, LLR=5.431). An upward trend was observed among the non-HIV-PcP group in the Jeju-do/Jeollanam-do/Jeollabuk-do/Gyeongsangnam-do/Busan/Daejeon/Daegu/Ulsan joint cluster (29.02%, LLR=11.638, P<0.001) located in the southern part of Korea. Both women and men in the non-HIV groups showed an overall upward trend of PcP during the study period. Men in the 60-69 age group had the highest annual percentage change (APC 41.8) during 2014-2019. In contrast, the HIV groups showed a falling trend of PcP recently. Men in the 60-69 age group had the most decrease (APC -17.6) during 2018-2021. This study provides an analytic basis for health measures and a nationwide epidemiological surveillance system for the management of PcP.

• Journal of the Korean Wood Science and Technology
• /
• v.32 no.2
• /
• pp.65-72
• /
• 2004

A melamine-urea-formaldehyde (MUF) resin, based on 5 percent melamine addition of the resin solids weight, was synthesized in the laboratory for particleboard (PB) manufacture. Laboratory PBs were made with the MUF resin at three press times (3, 4, 5 min) and two resin application rates (6, 8 percent). Enclosed caul system was used for collecting the exhaust gases materials generated during the hot-pressing of PBs. Exhaust gases materials generated inside the enclosed caul during the hot-pressing of PBs were collected in a controlled air stream. Formaldehyde from the exhaust gases collected was determined per a chromotropic method of the National Institute of Occupational Safety and Health Method 3500. The measurement results showed that formaldehyde emissions during the hot-pressing of PB significantly increased with increasing press time, and MUF resin application rates. PB' performance test results showed that internal bond (IB) of PB made with 3-minute press time exceeded the minimum requirement for KS F 3104 PB type 8.0.

• The Journal of Society for e-Business Studies
• /
• v.27 no.1
• /
• pp.1-13
• /
• 2022

With the development of network technologies, the security to protect organizational resources from internal and external intrusions and threats becomes more important. Therefore in recent years, the anomaly detection algorithm that detects and prevents security threats with respect to various security log events has been actively studied. Security anomaly detection algorithms that have been developed based on rule-based or statistical learning in the past are gradually evolving into modeling based on machine learning and deep learning. In this study, we propose a deep-autoencoder model that transforms LSTM-autoencoder as an optimal algorithm to detect insider threats in advance using various machine learning analysis methodologies. This study has academic significance in that it improved the possibility of adaptive security through the development of an anomaly detection algorithm based on unsupervised learning, and reduced the false positive rate compared to the existing algorithm through supervised true positive labeling.

• Journal of Korean Society for Quality Management
• /
• v.51 no.2
• /
• pp.155-170
• /
• 2023

Purpose: Nowadays, the risk assessment system is widely used in many industrial and public areas to reduce the possible risks. The system is used to determine the priorities of the government quality assurance works in Defense Agency for Technology and Quality. However, as the risk assessment system is used for other purposes, there are some items that need improvement, and in this study, we propose improvement plans by benchmarking the risk assessment systems of other institutions. Methods: In this paper, first, the procedures of risk assessment system used in many industrial sites were reviewed, and how each institution specialized and applied the system. Afterwards, by benchmarking various risk assessment systems, an improvement plan on how to operate the risk assessment system in the case of government quality assurance for centrally procured military supplies was presented, and practical application cases were presented to prove the usefulness of the improvement plan. Results: The proposed risk assessment system differs from the existing system in five major aspects. First, inputs, outputs, and key performance indicators were specified from the systematic point of view. Second, risk analysis was analyzed in four dimensions: probability of occurrence, impact, detection difficulty. Third, risk mitigation measures were classified, control, transfer, and sharing. Fourth, the risk mitigation measures were realized through document verification, product verification, process verification, and quality system evaluation. Finally, risk mitigation measures were implemented and the effectiveness of the risk mitigation measures was evaluated through effectiveness evaluation. Conclusions: In order for the risk assessment procedure proposed in this study to be applied to actual work, it is necessary to obtain the consent of the person involved in the work due to the increased time for risk identification and preparation of the government quality assurance log, and a change in the information system that performs the actual work is required. Therefore, the authors of this study plan to actively perform internal seminar presentations and work improvement suggestions to apply these research outputs to actual work.

• Genomics & Informatics
• /
• v.21 no.3
• /
• pp.40.1-40.11
• /
• 2023

Microbial community profiling using 16S rRNA amplicon sequencing allows for taxonomic characterization of diverse microorganisms. While amplicon sequence variant (ASV) methods are increasingly favored for their fine-grained resolution of sequence variants, they often discard substantial portions of sequencing reads during quality control, particularly in datasets with large number samples. We present a streamlined pipeline that integrates FastP for read trimming, HmmUFOtu for operational taxonomic units (OTU) clustering, Vsearch for chimera checking, and Kraken2 for taxonomic assignment. To assess the pipeline's performance, we reprocessed two published stool datasets of normal Korean populations: one with 890 and the other with 1,462 independent samples. In the first dataset, HmmUFOtu retained 93.2% of over 104 million read pairs after quality trimming, discarding chimeric or unclassifiable reads, while DADA2, a commonly used ASV method, retained only 44.6% of the reads. Nonetheless, both methods yielded qualitatively similar β-diversity plots. For the second dataset, HmmUFOtu retained 89.2% of read pairs, while DADA2 retained a mere 18.4% of the reads. HmmUFOtu, being a closed-reference clustering method, facilitates merging separately processed datasets, with shared OTUs between the two datasets exhibiting a correlation coefficient of 0.92 in total abundance (log scale). While the first two dimensions of the β-diversity plot exhibited a cohesive mixture of the two datasets, the third dimension revealed the presence of a batch effect. Our comparative evaluation of ASV and OTU methods within this streamlined pipeline provides valuable insights into their performance when processing large-scale microbial 16S rRNA amplicon sequencing data. The strengths of HmmUFOtu and its potential for dataset merging are highlighted.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.49 no.10
• /
• pp.217-230
• /
• 2012

This paper propose interacting test programming methods between test equipment and hardware unit to verify function and performance of the hardware unit under test. Proposed test program can minimizes the risk of failures when the unit is mounted on the aircraft by testing and verifying the unit under the worst stress condition. Also, Object oriented design using UML make it easy to apply in other equipments. Test program consists of architecture package and hardware package. Architecture package is in a role for system management, log analysis, message receiving and message analysis. Messages that are used by system management define messages for testing and defined messages is sent and received to test equipment through Ethernet. Hardware package is in a role for hardware management that is needed to be tested and is related to a system. Hardware to be tested is divided into internal test and transmission test. Internal test inspects hardware itself and reports the test results to the test equipment. Transmission test inspects communication device by sending or receiving data. All kinds of test is done in the worst condition of the test unit executing in parallel. Each device is tested at least 482 times and at most 15,003 times about one hour. Test program is utilized in hardware reliability test like as environmental test or EMI test.

• Tuberculosis and Respiratory Diseases
• /
• v.48 no.3
• /
• pp.339-346
• /
• 2000

Background : The moot important prognostic factor in non-small cell lung cancer is the TNM stage. Even after complete resection in early non-small cell lung cancer, the five-year survival rate is still low. However, new prognostic factors, including molecular biologic factors, have recently been found to guide the treatment of patients with non-small cell lung cancer. We evaluated the prognostic value of the loss of blood-group antigen A in tumor tissue, which has been implicated as an important prognostic factor for overall survival and the timing of the disease progression. Methods : The loss of blood-group antigen A was assessed immunohistochemically in paraffin-embedded tumor samples from 26 patients with blood types A or AB, who had undergone curative surgery. Monoclonal antibody was used to detect the blood group antigen A expression. Results : Fifteen patients (58%) expressed antigen A in their tumor tissue, whereas 11 patients (42%) did not show antigen A. The median survival time of the blood A antigen positive group was 11 months, while the median survival time of the blood A antigen negative group was 18 months. The difference in survival between the two groups was not statistically significant. Conclusion : The loss of blood-group antigen A in tumor tissue was not found to be a significant prognostic factor in patients with non-small cell lung cancer. This study needs to be extended for further evaluation.

• Tuberculosis and Respiratory Diseases
• /
• v.42 no.4
• /
• pp.548-554
• /
• 1995

Background: Cardiogenic pulmonary edema increases nonspecific airway responsiveness in humans and animals. Increased extravascular lung water from overt pulmonary edema to subclinical interstitial edema is a common finding in patients with chronic renal failure. Several studies carried out to assess pulmonary function disturbances in this condition have documented a reduction in forced expiratory volume that usually reverses after hemodialysis, suggesting airway edema as the underlying mechanism. This interstitial edema may also lead to nonspecific bronchial hyperresponsiveness. We hypothesized that patients with chronic renal failure may present nonspecific bronchial hyperresponsiveness due to subclinical interstitial pulmonary edema. Methods: We studied 18 chronic renal failure undergoing regular hemodialysis 3 times a week(New York Heart Association Class II) without concomittent disease. These patients were checked pulmonary function test and metacholine provocation test before hemodialysis and same procedure was repeated if responsive, after hemodialysis. Results: 1) 12 out of 18 patients before hemodialysis were reactive in metacholine provocation test(66.7%) before hemodialysis. This airway hyperresponsiveness were decreased after hemodialysis. 2) Pulmonary function was improved after hemodialysis and change in $FEV_1$ was correlated with change in weight(r=-0.62, p<0.01). 3) There was a close correlation between log $PD_{20}$ and $FEF_{25}$, which is one of the variables of the peripheral airways(r=0.58, p<0.05). Conclusion: We speculated interstitial pulmonary edema may play a significant role in bronchial hyperresponsiveness and lung function impaired in patients with chronic renal failure.