• 자원환경지질
• /
• 제27권6호
• /
• pp.579-592
• /
• 1994

A case study is presented where a fluvial system is modeled in three dimensions and compared to data gathered from a study of the Arkansas River. The data is unique in that it documents changes that affected a straight channel that was excavated within the river by the U.S. Army Corps of Engineers. Excavation plan maps and sequential aerial photographs show that the channel underwent massive deposition and channel migration as it returned to a more natural, meandering path. These records illustrate that stability of fluvial system can be disrupted either by catastrophic events such as floods or by subtle events such as the altering of a stream's equilibrium base level or sediment load. SEDSIM, Stanford's Sedimentary Basin Simulation Model, is modified and used to model the Arkansas River and the geologic processes that changed in response to changing hydraulic and geologic parameters resulting from the excavation of the channel. Geologic parameters such as fluid and sediment discharge, velocity, transport capacity, and sediment load are input into the model. These parameters regulate the frequency distribution and sizes of sediment grains that are eroded, transported and deposited. The experiments compare favorably with field data, recreating similar patterns of fluid flow and sedimentation. Therefore, simulations provide insight for understanding and spatial distribution of sediment bodies in fluvial deposits and the internal sedimentary structure of fluvial reservoirs. These techniques of graphic simulation can be contributed to support the development of the new design criteria compatible with natural stream processes, espacially drainage problem to minimize environmental disruption.

• Nuclear Engineering and Technology
• /
• 제50권3호
• /
• pp.368-378
• /
• 2018

Understanding of turbulent flow in the reactor coolant pump (RCP) is a premise of the optimal design of the RCP. Flow structures in the RCP, in view of the specially devised spherical casing, are more complicated than those associated with conventional pumps. Hitherto, knowledge of the flow characteristics of the RCP has been far from sufficient. Research into the nonintrusive measurement of the internal flow of the RCP has rarely been reported. In the present study, flow measurement using particle image velocimetry is implemented to reveal flow features of the RCP model. Velocity and vorticity distributions in the diffuser and spherical casing are obtained. The results illuminate the complexity of the flows in the RCP. Near the lower end of the discharge nozzle, three-dimensional swirling flows and flow separation are evident. In the diffuser, the imparity of the velocity profile with respect to different axial cross sections is verified, and the velocity increases gradually from the shroud to the hub. In the casing, velocity distribution is nonuniform over the circumferential direction. Vortices shed consistently from the diffuser blade trailing edge. The experimental results lend sound support for the optimal design of the RCP and provide validation of relevant numerical algorithms.

• 상하수도학회지
• /
• 제31권3호
• /
• pp.257-262
• /
• 2017

Several disposal processes for waste sludge from wastewater treatment plants such as landfill, ocean dump, incineration, reuse as fuels or fertilizers are practiced. However, ocean dumping is prohibited by international treat. New constructions of landfill sites or incineration facilities are limited by NIMBY and reuse processes are still suffering from low energy yield. Therefore, development of alternative processes for sludge disposal are currently needed. In this study, alternative technique for sludge solubilization using HVI (high voltage impulse) was suggested and verified experimentally. Sludge solubilization was carried out for 90 minutes using HVI discharge with peak voltage of 16 kV and pulse duration for 40 microsecond. About 3~9 % of MLSS and MLVSS concentration were reduced, but the soluble COD, TN, TP of the sludge increased to 372 %, 56 % and 102 % respectively. It indicates that the flocs and/or cells of the sludge were damaged by HVI. These resulted in flocs-disintegration and cells-lysis, which means the internal matters were bursted out of the flocs as well as the cells. Thus, electrical conductivity in bulk solution was increased. All of the results verified that the HVI could be used as an alternative technique for sludge solubilization processes.

• Journal of Chest Surgery
• /
• 제33권2호
• /
• pp.151-159
• /
• 2000

background: The right gastroepiploic artery(RGEA) has been use in coronary artery bypass grafting from 1987. The RGEA is the most useful arterial conduit in coronary artery bypass grafting(CABG) followed by the internal mammary artery, Materials and method: From Septermber 1998 to February 1999 the RGEA was used for coronary artery bypass grafting in 11 patients 10 males and 1 female. Postoperative angiography was performed in all of the patients before discharge Result: Early patent rate of the RGEA was 100%. The flow competition of the REGA graft was seen in 4 patients(36.4%) The flow pattern war RGEA dependent type in the inner diameter of the recipient coronary artery 1.5 mm the inner diameter of the RGEA 2.5 mm and the rtio of inner diameter of the RGEA and the recipient coronary artery 1(p<0.05) Conclusion : Early results of CABG with RGEA was satisfactory. However the RGEA graft has a tendency of flow competition in relation to the inner diameter of graft. Preoperative angiographic evaluation for RGEA and meticulous operative technique are required for a good surgical results.

• 융복합기술연구소 논문집
• /
• 제7권2호
• /
• pp.13-16
• /
• 2017

The design of sealing mechanisms of a manual pressure valve was analyzed with FE analysis for a hydrogen fuels charge and discharge system of FCEV. The damage prediction of the O-ring with respect to the material models of rubbers was calculated by the gap analysis of the backup ring and O-ring according to the internal pressure. Two kinds of the rubber material characteristic models were adopted to the O-ring. One was the linear elastic and the other was hyperelastic of Ogden $3^{rd}$ order model. The experimental data of urethane of Shore hardness 90 was utilized to the curve fitting of hyperelastic properties. It was found that the contact pattern of the backup ring was different in two models and the sealing mechanism was better in the case of the hyperelastic characteristic model.

• 한국응급구조학회지
• /
• 제9권1호
• /
• pp.95-99
• /
• 2005

Penetrating neck trauma by gunshot injury involving tracheobronchial tree is rare in Korea. Extensive tissue damage by cavitation, tissue fragmentation and shock wave transmission of high-velocity projectile along with associated organ injury renders high rate of mortality and morbidity. A 28 year old man in military service with gunshot wound in left cervical area presented initial symptoms of severe dyspnea and subcutaneous emphysema. Computed tomography of chest and cervical region as well as bronchoscopic evaluation was performed to confirm highly suspected injury to cervical trachea. Surgical exposure was established through a low collar incision; the damaged segment of 3.5 cm length including 2-4th tracheal rings was resected out and end-to-end anastomosis was performed. Bleeding from lacerated anterior jugular vein was controlled by ligation of both ends and a K2 bulllet was found upon inner border of body of first rib, medial to right carotid sheath and removed out. Cervical esophagus, carotid artery, internal jugular vein and recurrent laryngeal nerve were spared. Extubation was done on the first postoperative day and postoperative course until discharge on nineth postoperative day remained uneventful.

• 대한상부위장관⦁헬리코박터학회지
• /
• 제18권4호
• /
• pp.225-230
• /
• 2018

Upper gastrointestinal (GI) bleeding (UGIB) is the most common GI emergency, and it is associated with significant morbidity and mortality. Early identification of low-risk patients suitable for outpatient management has the potential to reduce unnecessary costs, and prompt triage of high-risk patients could allow appropriate intervention and minimize morbidity and mortality. Several risk-scoring systems have been developed to predict the outcomes of UGIB. As each scoring system measures different primary outcome variables, appropriate risk scores must be implemented in clinical practice. The Glasgow-Blatchford score (GBS) should be used to predict the need for interventions such as blood transfusion or endoscopic or surgical treatment. Patients with GBS ${\leq}1$ have a low likelihood of adverse outcomes and can be considered for early discharge. The Rockall score was externally validated and is widely used for prediction of mortality. The recently developed AIMS65 score is easy to calculate and was proposed to predict in-hospital mortality. The Forrest classification is based on endoscopic findings and can be used to stratify patients into high- and low-risk categories in terms of rebleeding and thus is useful in predicting the need for endoscopic hemostasis. Early risk stratification is critical in the management of UGIB and may improve patient outcome and reduce unnecessary health care costs through standardization of care.

• 한국재료학회지
• /
• 제29권2호
• /
• pp.106-115
• /
• 2019

Recently, metal cases are widely used in smart phones for their luxurious color and texture. However, when a metal case is used, electric shock may occur during charging. Chip capacitors of various values are used to prevent the electric shock. However, chip capacitors are vulnerable to electrostatic discharge(ESD) generated by the human body, which often causes insulation breakdown during use. This breakdown can be eliminated with a high-voltage chip varistor over 340V, but when the varistor voltage is high, the capacitance is limited to about 2pF. If a chip capacitor with a high dielectric constant and a chip varistor with a high voltage can be combined, it is possible to obtain a new device capable of coping with electric shock and ESD with various capacitive values. Usually, varistors and capacitors differ in composition, which causes different shrinkage during co-firing, and therefore camber, internal crack, delamination and separation may occur after sintering. In addition, varistor characteristics may not be realized due to the diffusion of unwanted elements into the varistor during firing. Various elements are added to control shrinkage. In addition, a buffer layer is inserted in the middle of the varistor-capacitor junction to prevent diffusion during firing, thereby developing a co-fired product with desirable characteristics.

• 한국분무공학회지
• /
• 제24권3호
• /
• pp.105-113
• /
• 2019

In this paper, a study of Urea-SCR System for Dosing Injector for responding to enhanced environmental regulations has been conducted. There is a limit to the experimental approach due to the structural characteristics of the injector. In order to overcome this problem, The analysis was performed assuming unsteady turbulent flow through computational fluid analysis and the internal flow characteristics of the injector were analyzed. By changing the nozzle shape of the injector, the performance factors of the swirl injector by shape were selected and compared. The design parameters were modified by changing the diameter of the nozzle at a constant ratio compared to the base model. Swirl coefficient, outlet mass flow, and sac volume were selected as performance parameters of the injector. The Conv. model to which the taper was applied showed the dominance in mass flow rate, discharge coefficient and swirl because of the smooth fluid flow by shape. Swirl coefficient, outlet mass flow, and sac volume were selected as performance parameters of the injector. As a result of the comparison coefficient derivation with those performance parameters for comparing the performance of the model-specific injector, the Conv-140 model with the nozzle diameter expanded by 140% showed the best value of the comparison coefficient.

• 한국임상수의학회지
• /
• 제36권4호
• /
• pp.238-243
• /
• 2019

A 6-year-old, spayed female Maltese was presented with the condition of a chronic recurrent abscess formation in the left flank region. Despite the antibiotics and drainage therapy given to the dog, the lesion formed a continued serosanguineous to the point that a purulent discharge was evident. In the meantime, an abdominal ultrasound revealed the presence of a well-defined mass with a hypoechoic outer margin, and a hyperechoic inner rim in the cranial of the kidney. A fistula was noted as being present with a connection between the subcutaneous lesion of the left flank and the abdominal mass. It is emphasized that CT scans revealed the existence of a soft tissue dense mass with low attenuation area, as seen in some internal areas and also a peripheral contrast enhancement was noted within a nonenhancing central region. There was additional nonenhancing fluid found dorsal to the inflammatory tract passing under the epaxial muscles and at the peritoneum. Likewise, the tract exited the skin surface in the left flank. A tentative diagnosis of an abdominal abscess with spontaneous cutaneous fistula was made based on the ultrasonographic and CT appearances. A foreign body such as surgical gauze should always be considered a potential cause of draining tract in small animals, as was considered to be the problem in this case.