• Nuclear Engineering and Technology
• /
• 제54권8호
• /
• pp.2792-2800
• /
• 2022

In the core of the WWR-K reactor, a long-term irradiation of tristructural isotopic (TRISO)-coated fuel particles (CFPs) with a UO₂ kernel was carried out under high-temperature gas-cooled reactor (HTGR)-like operating conditions. The temperature of this TRISO fuel during irradiation varied in the range of 950-1100 ℃. A fission per initial metal atom (FIMA) of uranium burnup of 9.9% was reached. The release of gaseous fission products was measured in-pile. The release-to-birth ratio (R/B) for the fission product isotopes was calculated. Aspects of fuel safety while achieving deep fuel burnup are important and relevant, including maintaining the integrity of the fuel coatings. The main mechanisms of fuel failure are kernel migration, silicon carbide corrosion by palladium, and gas pressure increase inside the CFP. The formation of gaseous fission products and carbon monoxide leads to an increase in the internal pressure in the CFP, which is a dominant failure mechanism of the coatings under this level of burnup. Irradiated fuel compacts were subjected to electric dissociation to isolate the CFPs from the fuel compacts. In addition, nondestructive methods, such as X-ray radiography and gamma spectrometry, were used. The predicted R/B ratio was evaluated using the fission gas release model developed in the high-temperature test reactor (HTTR) project. In the model, both the through-coatings of failed CFPs and as-fabricated uranium contamination were assumed to be sources of the fission gas. The obtained R/B ratio for gaseous fission products allows the finalization and validation of the model for the release of fission products from the CFPs and fuel compacts. The success of the integrity of TRISO fuel irradiated at approximately 9.9% FIMA was demonstrated. A low fuel failure fraction and R/B ratios indicated good performance and reliability of the studied TRISO fuel.

• 항공우주시스템공학회지
• /
• 제16권3호
• /
• pp.73-83
• /
• 2022

본 논문에서는 항공기 운영 중에 RF 방사 신호로 인하여 발생한 특정 주파수 대역 대의 수신 잡음에 대한 개선 방안을 연구하였다. 항공기의 통신장비는 내/외부통신의 기능을 담당하기에 비행 임무 수행과 안전에 있어서 매우 중요하다. 잡음이 없고 깨끗한 통신 품질과 송/수신 기능이 구현되어야 한다. 따라서 특정 주파수 대역 대의 수신 잡음 현상을 고장탐구를 통해 원인분석을 하였다. 항공기 내부의 특정 보조시스템 장비에서 발산되는 RF 방사 신호로 인해 발생한 수신 잡음을 무전해 니켈 도금이 적용된 CAP으로 차폐하여 개선하였다. 또한, 개선 방안에 대한 측정 및 검증 결과도 함께 기술하였다.

• International Journal of Computer Science & Network Security
• /
• 제22권8호
• /
• pp.260-268
• /
• 2022

The article considers the training, competitiveness of specialists, professional mobility, professionalism and competence of specialists in the context of distance learning. The advantages of distance learning are shown. The characteristic features of distance learning in the preparation of students and in the implementation of these technologies in the educational process of higher educational institutions are determined. Competitiveness, professional mobility, professionalism and competence of a specialist are qualities that determine a person's life and work success. Professional mobility is interpreted as a systemic quality of a specialist's personality, which includes a whole range of knowledge, skills, abilities, personal qualities, value orientations, and so on. The vision of mobility of specialists by foreign scientists is presented. It is noted that the classification of professional mobility presented in the article makes it possible to organize various movements from a single position, to present them as separate manifestations of the general process of professional and pedagogical mobility, to determine which type of mobility ensures the performance of certain social functions. It was found that mobility can be differentiated into differentiated and intergeneration. According to the subject, individual and group mobility are distinguished; according to the direction - internal and external. The classification of employees according to their attitude to mobility is shown, which can be divided into the following groups: actually mobile; potentially mobile; actually stable; potentially stable.

• Journal of the Korean Wood Science and Technology
• /
• 제32권1호
• /
• pp.80-87
• /
• 2004

천연접착제인 분말상 탄닌수지를 사용한 파티클보드의 물리·기계적 성질의 개선을 위하여 분말상 탄닌수지와 액상 탄닌수지를 혼합하여 사용한 결과, 30:70 (분말 : 액상)의 혼합비가 최적조건이었으며 분말상 탄닌 수지의 비율이 높으면 물성이 저하되는 현상을 볼 수 있었으며 또한 포름알데히드 방산량이 E₀ 수준의 고내수성 제품을 제조할 수 있었다. 한편 요소수지 및 멜라민수지와 분말상 탄닌 수지와의 혼합방법은 물리·기계적 성질의 개선에 영향을 주지 못했으며, 유리포름알데히드 방산에 대한 scavenger의 역할만을 하였다.

• 대기
• /
• 제31권5호
• /
• pp.473-488
• /
• 2021

A new physical/statistical diagnostic downscale model has been developed for use to improve near-surface air temperature forecasts. The model includes a series of physical and statistical correction methods that account for un-resolved topographic and land-use effects as well as statistical bias errors in a low-resolution atmospheric model. Operational temperature forecasts of the Local Data Assimilation and Prediction System (LDAPS) were downscaled at 100 m resolution for three months, which were used to validate the model's physical and statistical correction methods and to compare its performance with the forecasts of the Korea Meteorological Administration Post-processing (KMAP) system. The validation results showed positive impacts of the un-resolved topographic and urban effects (topographic height correction, valley cold air pool effect, mountain internal boundary layer formation effect, urban land-use effect) in complex terrain areas. In addition, the statistical bias correction of the LDAPS model were efficient in reducing forecast errors of the near-surface temperatures. The new high-resolution downscale model showed better agreement against Korean 584 meteorological monitoring stations than the KMAP, supporting the importance of the new physical and statistical correction methods. The new physical/statistical diagnostic downscale model can be a useful tool in improving near-surface temperature forecasts and diagnostics over complex terrain areas.

• 대한간호학회지
• /
• 제52권5호
• /
• pp.535-549
• /
• 2022

Purpose: The study aimed to design and develop an automated personalized self-care (APSC) program for patients with type 2 diabetes mellitus. The secondary aim was to present a clinical protocol as a mixed-method research to test the program effects. Methods: The APSC program was developed in the order of analysis, design, implementation, and evaluation according to the software development life cycle, and was guided by the self-regulatory theory. The content validity, heuristics, and usability of the program were verified by experts and patients with type 2 diabetes mellitus. Results: The APSC program was developed based on goal setting, education, monitoring, and feedback components corresponding to the phases of forethought, performance/volitional control, and self-reflection of self-regulatory theory. Using the mobile application, the participants are able to learn from educational materials, monitor their health behaviors, receive weekly-automated personalized goals and feedback messages, and use an automated conversation system to solve the problems related to self-care. The ongoing two-year study utilizes a mixed method design, with 180 patients having type 2 diabetes mellitus randomized to receive either the intervention or usual care. The participants will be reviewed for self-care self-efficacy, health behaviors, and health outcomes at 6, 12, 18, and 24 months. Participants in the intervention group will be interviewed about their experiences. Conclusion: The APSC program can serve as an effective tool for facilitating diabetes health behaviors by improving patients' self-care self-efficacy and self-regulation for self-care. However, the clinical effectiveness of this program requires further investigation.

• 한국콘텐츠학회논문지
• /
• 제22권9호
• /
• pp.614-627
• /
• 2022

본 연구는 국내 HR Analytics 연구에서 활용한 데이터와 분석방법을 탐색하여 향후 연구를 위한 기초자료를 제공하고 HR Analytics 연구 현황을 밝히는 것을 목적으로 한다. 이를 위하여 체계적 문헌고찰 방법을 활용하여 국내 KCI 등재 학술지에 수록된 실증연구 논문 78편을 선정하였고 해당 논문을 근로자 생애주기에 따라 분류하여 검토하였다. 문헌고찰 결과 다음과 같은 결과를 얻을 수 있었다. 첫째, 근로자 생애주기에 따른 HR Analytics 연구 동향을 살펴본 결과, 선행연구에서는 구성원의 유지(retention)와 관련한 연구가 가장 많았고 성과 관리에 대한 연구가 그 뒤를 이었다. 둘째, HR Analytics 연구에서 사용한 데이터를 살펴본 결과 각 연구는 해당 연구문제에 따라 다양한 데이터(정형, 비정형)를 활용하고 있었으며 데이터 출처 또한 조직내부 시스템부터 국가 통계 DB까지 매우 다양한 것으로 확인하였다. 셋째, 문헌고찰 결과 국내 HR Analytics 연구는 기술적, 진단적 분석이 가장 많으며, 예측 및 처방과 관련한 연구는 미미한 수준임을 알 수 있었다.

• 한국수소및신에너지학회논문집
• /
• 제33권5호
• /
• pp.557-565
• /
• 2022

The effect of flow configuration in ammonia-fed solid oxide fuel cell are investigated by using a three-dimensional numerical model. Typical flow configurations including co-flow and counter-flow are considered. The ammonia is directly fed into the stack without any external reforming process, resulting in an internal decomposition of NH3 in the anode electrode of the stack. The result showed that temperature profile in the case of counter-flow is more uniform than the co-flow configuration. The counter-flow cell, the temperature is highest at the middle of the channel while in the case of co-flow, the temperature is continuously increased and reached maximum value at the outlet area. This leads to a higher averaged current density in counter-flow compared to that of co-flow, about 5%.

• Journal of the Korean Wood Science and Technology
• /
• 제32권2호
• /
• pp.65-72
• /
• 2004

요소-멜라민수지 접착제를 실험실에서 수지 접착제 고형분량에 대해 5% 멜라민을 첨가하여 파티클보드 제조용으로 합성하였다. 합성한 요소-멜라민 수지를 이용하여 전건 목재파티클의 무게에 대해 접착제 첨가량 6, 8%와 열압시간 3, 4, 5분에서 실험실 파티클보드를 접착하는 열압시간동안 배출되는 가스를 증류수에 용해·포집하여 얻어진 용액으로부터 포름알데히드 배출량을 미국 National Institute of Occupational Safety and Health (NIOSH) 3500의 방법에 의해 분석·비교하였다. 포름알데히드 배출량을 측정하여 분석한 결과는 파티클보드를 열압하는 시간동안 배출되는 가스 중에서 포름알데히드량은 요소-멜라민수지 접착제의 첨가량과 열압시간에 대해 통계적으로 유의하게 차이가 있다는 것을 보여줬다. 파티클보드의 성능평가 결과는 3분의 열압시간에서 접착된 파티클보드의 박리강도는 KS F 3104 파티클보드 8.0형의 최소요구치를 만족시키는 것을 보여줬다.

• Journal of Veterinary Science
• /
• 제21권3호
• /
• pp.35.1-35.11
• /
• 2020

Background: Despite common use of tylosin in turkeys, the pharmacokinetic (PK) data for this drug in turkeys is limited. Within a few months of growth, PK of drugs in turkeys undergoes changes that may decrease their efficacy due to variable internal exposure. Objectives: The objective of this study was to investigate the influence of age on the PK of a single intravenous (i.v.) and oral administration of tylosin to turkeys at a dose of 10 and 50 mg/kg, respectively. Methods: Plasma drug concentrations were measured using high-performance liquid chromatography with UV detection. The PK parameters were assessed by means of non-compartmental approach and were subjected to allometric analysis. Results: During a 2.5-month-long period of growth from 1.4 to 14.7 kg, the median value for area under the concentration-time curve after i.v. administration increased from 2.61 to 7.15 mg × h/L and the body clearance decreased from a median of 3.81 to 1.42 L/h/kg. Over the same time, the median elimination half-life increased from 1.03 to 2.96 h. For the oral administration a similar trend was noted but the differences were less pronounced. Bioavailability was variable (5.76%-21.59%) and age-independent. For both routes, the plasma concentration of the major tylosin metabolite, tylosin D, was minimal. Protein binding was age-independent and did not exceed 50%. Allometric analysis indicated a relatively poor predictivity of clearance, volume of distribution and elimination half-life for tylosin in turkeys. Conclusions: Age has a significant impact on tylosin PK in turkeys and dosage adjustment may be needed, particularly in young individuals.