Acknowledgement
This research was financially supported by the Ministry of Trade, Industry and Energy (MOTIE) and Korea Institute for Advancement of Technology (KIAT) through the National Innovation Cluster R&D program (P00015272_Development of Manufacturing Technology for Improving High Temperature Durability and Efficiency of Metal Bipolar for SOFC). This research was also supported by a grant of the Research Program funded by the Korea Institute of Machinery and Materials (project name: Development of an ammonia fuel cell stack and system, grant number: NK237G).
References
- V. T. Giap, Y. D. Lee, Y. S. Kim, T. Q. Quach, and K. Y. Ahn, "Optimal design of RSOFC system coupled with waste steam using ejector for fuel recirculation", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 4, 2019, pp. 303-311, doi: https://doi.org/10.7316/KHNES.2019.30.4.303.
- J. Lee, I. T. Pineda, V. T. Giap, D. Lee, Y. S. Kim, K. Y. Ahn, and Y. D. Lee, "Performance prediction model of solid oxide fuel cell stack using deep neural network technique", Trans Korean Hydrogen New Energy Soc, Vol. 31, No. 5, 2020, pp. 436-443, doi: https://doi.org/10.7316/KHNES.2020.31.5.436.
- T. Bui, Y. S. Kim, V. T. Giap, D. K. Lee, and K. Y. Ahn, "Parametric study on high power SOEC system", Trans Korean Hydrogen New Energy Soc, Vol. 32, No. 6, 2021, pp. 470-476, doi: https://doi.org/10.7316/KHNES.2021.32.6.470.
- V. T. Giap, Y. D. Lee, Y. S. Kim, and K. Y. Ahn, "Technoeconomic analysis of reversible solid oxide fuel cell system couple with waste steam", Trans Korean Hydrogen New Energy Soc, Vol. 30, No. 1, 2019, pp. 21-28, doi: https://doi.org/10.7316/KHNES.2019.30.1.21.
- J. Larminie and A. Dicks, "Fuel cell systems explained", 2nd ed, John Wiley & Sons Ltd., USA, 2003.
- L. van Biert, T. Woudstra, M. Godjevac, K. Visser, and P. V. Aravind, "A thermodynamic comparison of solid oxide fuel cellcombined cycles", Journal of Power Sources, Vol. 397, 2018, pp. 382396, doi: https://doi.org/10.1016/j.jpowsour.2018.07.035.
- Y. D. Lee, "Thermodynamic, economic and environmental evaluation of solid oxide fuel cell hybrid power generation systems", Technische Universitaet Berlin (Germany) ProQuest Dissertations Publishing, 2015. Retrieved from https://www.proquest.com/openview/98713295543a6549761ae814ebd06d4a/1?pqorigsite=gscholar&cbl=2026366.
- A. Andrijanovits and V. Beldjajev, "Technoeconomic analysis of hydrogen buffers for distributed energy systems", International Symposium on Power Electronics Power Electronics, Electrical Drives, Automation and Motion, 2012, pp. 1401-1406, doi: https://doi.org/10.1109/SPEEDAM.2012.6264583.
- Y. Guo, Z. Pan, and L. An, "Carbonfree sustainable energy technology: direct ammonia fuel cells", Journal of Power Sources, Vol. 476, 2020, pp. 228454, doi: https://doi.org/10.1016/j.jpowsour.2020.228454.
- Z. Wan, Y. Tao, J. Shao, Y. Zhang, and H. You, "Ammonia as an effective hydrogen carrier and a clean fuel for solid oxide fuel cells", Energy Conversion and Management, Vol. 228, 2021, pp. 113729, doi: https://doi.org/10.1016/j.enconman.2020.113729.
- M. Kishimoto, H. Muroyama, S. Suzuki, M. Saito, T. Koide, Y. Takahashi, T. Horiuchi, H. Yamasaki, S. Matsumoto, H. Kubo, N. Takahashi, A. Okabe, S. Ueguchi, M. Jun, A. Tateno, T. Matsuo, T. Matsui, H. Iwai, H. Yoshida, and K. Eguchi, "Development of 1 kWclass ammoniafueled solid oxide fuel cell stack", Fuel Cells, Vol. 20, No. 1, 2020, pp. 80-88, doi: https://doi.org/10.1002/fuce.201900131.
- T. Q. Quach, D. K. Lee, K. Y. Ahn, and Y. S. Kim, "Enhancing flow uniformity of gas separator for solid oxide fuel cells by optimizing dimple patterns", Trans Korean Hydrogen New Energy Soc, Vol. 32, No. 5, 2021, pp. 331-339, doi: https://doi.org/10.7316/KHNES.2021.32.5.331.
- Y. J. Kim, H. Yin, H. J. Kim, K. S. Yun, and J. H. Yu, "Numerical analysis on the flow distribution in a 1 kWe SOFC stack of internal manifolds according to the variation of manifold sizes", Trans Korean Hydrogen New Energy Soc, Vol. 33, No. 1, 2022, pp. 47-54, doi: https://doi.org/10.7316/KHNES.2022.33.1.47.
- R. W. McCabe, "Kinetics of ammonia decomposition on nickel", Journal of Catalysis, Vol. 79, No. 2, 1983, pp. 445-450, doi: https://doi.org/10.1016/00219517(83)903378.
- A. S. Chellappa, C. M. Fischer, and W. J. Thomson, "Ammonia decomposition kinetics over NiPt/Al2O3 for PEM fuel cell applications", Applied Catalysis A: General, Vol. 227, No. 12, 2002, pp. 231-240, doi: https://doi.org/10.1016/S0926860X(01)009413.
- B. Ghorbani and K. Vijayaraghavan, "A review study on softwarebased modeling of hydrogenfueled solid oxide fuel cells", Int. J. Hydrogen Energy, Vol. 44, No. 26, 2019, pp. 13700-13727, doi: https://doi.org/10.1016/j.ijhydene.2019.03.217.
- W. C. Tan, H. Iwai, M. Kishimoto, and H. Yoshida,"Quasi threedimensional numerical simulation of a solid oxide fuel cell short stack: Effects of flow configurations including airflow alternation", Journal of Power Sources, Vol. 400, 2018, pp. 135-146, doi: https://doi.org/10.1016/j.jpowsour.2018.08.002.