• 제목/요약/키워드: Internal Fault

검색결과 249건 처리시간 0.031초

A Faulty Synchronous Machine Model for Efficient Interface with Power System

  • Amangaldi Koochaki
    • Journal of Electrical Engineering and Technology
    • /
    • 제10권3호
    • /
    • pp.812-819
    • /
    • 2015
  • This paper presents a new approach for simulating the internal faults of synchronous machines using distributed computing and Large Change Sensitivity (LCS) analysis. LCS analysis caters for a parallel solution of 3-phase model of a faulted machine within the symmetrical component-based model of interconnected network. The proposed method considers dynamic behavior of the faulty machine and connected system and tries to accurately solve the synchronous machine’s internal fault conditions in the system. The proposed method is implemented in stand-alone FORTRAN-based phasor software and the results have been compared with available recordings from real networks and precisely simulated faults by use of the ATP/EMTP as a time domain software package. An encouraging correlation between the simulation results using proposed method, ATP simulation and measurements was observed and reported. The simplified approach also enables engineers to quickly investigate their particular cases with a reasonable precision.

데이터마이닝 기법을 이용한 주상변압기 고장유형 분석 및 복구 예측모델 구축에 관한 연구 (Fault Pattern Analysis and Restoration Prediction Model Construction of Pole Transformer Using Data Mining Technique)

  • 황우현;김자희;장완성;홍정식;한득수
    • 전기학회논문지
    • /
    • 제57권9호
    • /
    • pp.1507-1515
    • /
    • 2008
  • It is essential for electric power companies to have a quick restoration system of the faulted pole transformers which occupy most of transformers to supply stable electricity. However, it takes too much time to restore it when a transformer is out of order suddenly because we now count on operator in investigating causes of failure and making decision of recovery methods. This paper presents the concept of 'Fault pattern analysis and Restoration prediction model using Data mining techniques’, which is based on accumulated fault record of pole transformers in the past. For this, it also suggests external and internal causes of fault which influence the fault pattern of pole transformers. It is expected that we can reduce not only defects in manufacturing procedure by upgrading quality but also the time of predicting fault patterns and recovering when faults occur by using the result.

발전기의 사고 시뮬레이션과 분석 (Fault Simulation and Analysis of Generator)

  • 박철원;오용택
    • 전기학회논문지P
    • /
    • 제62권3호
    • /
    • pp.151-158
    • /
    • 2013
  • Large generator of power plant is very important. In order to protect large generator from faults, digital protective relay or IED is required. However, all protective relays for generators of the domestic power plant are operated by foreign products. And now, for technological independence from foreign and improvement of import substitution effect, IEDs using domestic technology are being developed. To evaluate performance of developing next-generation power devices, the study of the dynamic characteristics of the power plant, generator system modeling, fault simulation and analysis, should be considered. Specially, To obtain IEEE Standards COMTRADE format for relay operation test, generator system modeling and fault simulation using PSCAD/EMTDC tools must be preceded. Until now, a complete modeling of generator internal windings and fault simulation techniques dose not exist. In this paper, for evaluation performance of relay elements of developing IED, the generator system modeling and various faults simulation using PSCAD/EMTDC tools were performed. And then, the various transient phenomena through obtained relaying signal of developed modeling were analyzed.

디지털회로의 단일고착형 결함에 대한 신호적 신뢰도계정 (The Evaluation of Signal Reliability for single Stuck-at-type Fault in Digital Circuit)

  • 김영일;오영환
    • 한국통신학회논문지
    • /
    • 제12권2호
    • /
    • pp.139-147
    • /
    • 1987
  • 본 논문에서는 디지털回路의 단일 고착형 결함(single stuck-at-type fault)에 대한 信號的 信賴度(signal reliability)를 計定하는 방법을 보였다. 디지털 회로에 있어 신호적 신뢰도라 함은 회로내부에 결함이 존재한다고 할지라도 올바른 출력을 내는 確率을 의미한다. 신호적 신뢰도를 계정함에 있어서 단일 고착형 결함에 대한 결함 모델과 알고리즘을 보이고 또한 복잡하고 규모가 큰 회로에 적용할 수 있는 컴퓨터 프로그램도 구성하였다.

  • PDF

단층핵의 물리적 특성과 마찰 특성의 상관관계 분석 (Physical Properties and Friction Characteristics of Fault Cores in South Korea)

  • 문성우;윤현석;서용석
    • 자원환경지질
    • /
    • 제53권1호
    • /
    • pp.71-85
    • /
    • 2020
  • 본 연구에서는 지반공학 및 지질공학적 측면에서 단층핵의 거동을 이해하기 위해 화강암, 퇴적암 및 화산암 단층대에서 채취된 단층핵 시료를 대상으로 물리적 특성(각력 및 점토함량, 단위중량, 공극률, 함수비)과 마찰 특성(내부마찰각, 점착력)의 관계를 분석하였다. 실내시험으로부터 산정된 물리적 특성을 분석한 결과, 단층핵 내 각력은 단위중량과 양(+)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와는 음(-)의 상관관계를 가진다. 직접전단시험으로부터 산정된 내부 마찰각과 점착력에 대한 사분위수 범위(IQR)는 각각 16.7-38.1°, 2.5-25.3 kPa로 나타났다. 또한, 단층핵의 마찰특성에 미치는 물리적 특성의 영향을 분석한 결과, 마찰각은 모든 암종에서 각각 각력함량 및 단위중량과 양(+)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와 음(-)의 상관관계를 보인다. 대조적으로, 단층핵의 점착력은 각력함량 및 단위중량과 음(-)의 상관관계를 가지고, 점토함량, 공극률 및 함수비와 양(+)의 상관관계를 보인다.

고압전동기 고정자권선의 부분방전 특징추출 (Feature Extraction of Partial Discharge for Stator Winding of High Voltage Motor)

  • 박재준
    • 정보학연구
    • /
    • 제7권4호
    • /
    • pp.61-69
    • /
    • 2004
  • 본 논문에서는 6.6kV급 고압전동기 모델 코일을 4가지의 권선의 인공적인 결함을 갖도록 제작하였다. 운전중 모의를 위해 모델 코일에 80pF의 에폭시-마이카 커플러를 설치하였으며, TGA를 사용하여 NQN, 부분방전 크기 및 부분방전 패턴 등을 측정하였다. 웨이블렛 변환기법을 이용한 고압전동기의 고정자권선의 결함에서 발생된 부분방전신호의 파형을 통하여 여러 가지의 통계적인 파라메터를 통하여 특징을 추출하였다.

  • PDF

A numerical study on the feasibility evaluation of a hybrid type superconducting fault current limiter applying thyristors

  • Nam, Seokho;Lee, Woo Seung;Lee, Jiho;Hwang, Young Jin;Ko, Tae Kuk
    • 한국초전도ㆍ저온공학회논문지
    • /
    • 제15권4호
    • /
    • pp.26-29
    • /
    • 2013
  • Smart fault current controller (SFCC) proposed in our previous work consists of a power converter, a high temperature superconducting (HTS) DC reactor, thyristors, and a control unit [1]. SFCC can limit and control the current by adjusting firing angles of thyristors when a fault occurs. SFCC has complex structure because the HTS DC reactor generates the loss under AC. To use the DC reactor under AC, rectifier that consists of four thyristors is needed and it increases internal resistance of SFCC. For this reason, authors propose a hybrid type superconducting fault current limiter (SFCL). The hybrid type SFCL proposed in this paper consists of a non-inductive superconducting coil and two thyristors. To verify the feasibility of the proposed hybrid type SFCL, simulations about the interaction of the superconducting coil and thyristors are conducted when fault current flows in the superconducting coil. Authors expect that the hybrid type SFCL can control the magnitude of the fault current by adjusting the firing angles of thyristors after the superconducting coil limits the fault current at first peak.

전기철도 AT급전계통에 Low-Pass Filter를 이용한 직류옵셋 제거에 관한 연구 (A Study on DC Offset Removal using Low-Pass Filter in AT Feeder System for Electric Railway)

  • 이환;정노건;김재문
    • 전기학회논문지
    • /
    • 제65권6호
    • /
    • pp.1108-1114
    • /
    • 2016
  • The cause of failure in the AT feeding system is divided into grounding, short-circuit of feeding circuit and internal faults of the railway substation. Since the fault current is very high, real-time current is detected and the failure must be immediately removed. In this paper, a new DC offset elimination filter that can remove component to decrease in the form of exponential function using low-pass filter was proposed in order to extract the fundamental wave from distorted fault current. In order to confirm the performance of the proposed filter method, AT feeder system was modelled by simulation tool and simulations were performed under various conditions such as fault location, fault resistance and fault voltage phase angle in case of trolley-rail short-circuit fault. When applying the proposed DC-offset removal method, it can be seen that the phase delay and gain error did not appear.

원자력발전소의 화재사건 확률론적안전성평가 모델 구축에 관한 연구 (A Study on the Constructions of Fire Events Probabilistic Safety Assessment Model for Nuclear Power Plants)

  • 강대일;김길유
    • 한국안전학회지
    • /
    • 제31권5호
    • /
    • pp.187-194
    • /
    • 2016
  • A single fire event within a fire area can cause multiple initiating events considered in internal events probabilistic safety assessment (PSA). For an example, a fire event in turbine building fire area can cause a loss of the main feed-water and loss of off-site power initiating events. This fire initiating event could result in special plant responses beyond the scope of the internal events PSA model. One approach to address a fire initiating event is to develop a specific fire event tree. However, the development of a specific fire event tree is difficult since the number of fire event trees may be several hundreds or more. Thus, internal fire events PSA model has been generally constructed by modifications of the pre-developed internal events PSA model. New accident sequence logics not covered in the internal events PSA model are separately developed to incorporate them into the fire PSA model. Recently, many fire PSA models have fire induced initiating event fault trees not shown in an internal event PSA model. Up to now, there has been no analytical comparative study on the constructions of fire events PSA model using internal events PSA model with and without fault trees of initiating events. In this study, the changing process of internal events PSA model to fire events PSA model is analytically presented and discussed.