• 한국정보통신설비학회:학술대회논문집
• /
• 2004.08a
• /
• pp.23-26
• /
• 2004

본 논문은 전력증폭기의 효율을 개선하기 위한 도허티증폭기의 특성 분석에 관한 것이다. 도허티증폭기의 특성을 분석하기 위해 2-tone신호와 WCDMA신호를 사용하였고 180W PEP LDMOSFET을 사용하였다. 제작된 도허티증폭기는 출력 전력 20W에서 약 10%정도의 효율개선을 나타냈지만 선형성이 저하되는 특성을 나타내었다. 저하된 선형성을 개선시키기 위해 carrier 증폭기(Amp. A)와 peaking 증폭기(Amp. B)를 각각 변화하였으며, carrier 증폭기는 높은 PEP(Peak Envelope Power)와 적은 Id(drain current)가 되도록 하였고, peaking 증폭기는 높은 이득과, 낮은 gate bias에서 IMD(Intermodulation Distortion)가 상쇄되도록 하였다. 최종 측정 결과 출력전력 20W에서 선형성은 class AB증폭기와 비교하여 유사한 결과를 얻었으며, 효율은 약 10% 이상의 개선을 얻을 수 있었다.

• 한국정보통신설비학회:학술대회논문집
• /
• 2006.08a
• /
• pp.15-18
• /
• 2006

We have proposed a broadband analog feedforward optical transmitter using a wideband $180^{\circ}$ hybrid coupler instead of conventional frequency-sensitive phase shifter with the narrow bandwidth property using a wideband $180^{\circ}$ hybrid coupler, the wide-band linearization technique enhances the linearity of the feedforward optical transmitter. In two-tone cases, the $3^{rd}-IMD$ products was enhanced more than 10 dB in 385 MHz range(1.375$\sim$l.76 GHz).

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.6
• /
• pp.404-411
• /
• 2001

In this paper, we have measured and analyzed the third-order intermodulation distortion(IMD3) mostly appeared in a laser diode(LD) of an optical link for CDMA signals to characterize the links with an inexpensive way. We analyzed adjacent channel power ratio(ACPR) of CDMA signals as a function of FA, which negatively affects ACPR.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1086-1093
• /
• 2001

A new linearization technique for RF high-power amplifiers(HPAs) using n-th order error signal generator (ESGn) is proposed. The n-th order ESG generates an error signal based on the complex envelope transfer characteristics of the HPA, which is combined at the output of the HPA. Therefore, the higher-order nonlinearlities are not affected by the ESG$\_$n/ and the stability of the linearized system is guaranteed due to the inherent open-loop configuration. Moreover, the output delay loss can be avoided, because the error signal is generated with the input signal of the HPA. The IMD(intermodulation distortion) improvement obtained applying the ESG$\_$7/ to 5 W class A HPA in cellular band demonstrates the feasibility of the proposed postdistortion system.

• Journal of Advanced Navigation Technology
• /
• v.10 no.3
• /
• pp.256-262
• /
• 2006

This paper proposes a new predistortion linearizer to compensate for AM/AM and AM/PM in the nonlinear characteristics of amplifier. This consists of common-emitter amplifier and schottky diode that is connected between emitter and ground. When effective resistance of the schottky diode with bias condition varies, common-emitter amplifier with series feedback has a increase of amplitude and expansion of phase. This makes a amplifier nonlinear characteristics are to be improved. The proposed linearizer and amplifier has been manufactured and tested to operate in cellular base station frequency (869~894MHz). The test results show that third order intermodulation distortion (IMD3) cab be removed by more than 10.4dB in case of CW 2-tone signals ${\Delta}f$=1MHz, and the adjacent channel power ratio (ACPR) also can be improved by more than 9.6dB for CDMA IS-95 1FA signals.

• Journal of Sensor Science and Technology
• /
• v.32 no.6
• /
• pp.432-440
• /
• 2023

This study introduces an efficient readout circuit designed for two-electrode electrocardiogram (ECG) recording, characterized by its low-noise and low-power consumption attributes. Unlike its three-electrode counterpart, the two-electrode ECG is susceptible to common-mode interference (CMI), causing signal distortion. To counter this, the proposed circuit integrates a common-mode charge pump (CMCP) with a window comparator, allowing for a CMI tolerance of up to 20 V_PP. The CMCP design prevents the activation of electrostatic discharge (ESD) diodes and becomes operational only when CMI surpasses the predetermined range set by the window comparator. This ensures power efficiency and minimizes intermodulation distortion (IMD) arising from switching noise. To maintain ECG signal accuracy, the circuit employs a chopper-stabilized instrumentation amplifier (IA) for low-noise attributes, and to achieve high input impedance, it incorporates a floating high-pass filter (HPF) and a current-feedback instrumentation amplifier (CFIA). This comprehensive design integrates various components, including a QRS peak detector and serial peripheral interface (SPI), into a single 0.18-㎛ CMOS chip occupying 0.54 mm². Experimental evaluations showed a 0.59 µV_RMS noise level within a 1-100 Hz bandwidth and a power draw of 23.83 µW at 1.8 V.

• Journal of Satellite, Information and Communications
• /
• v.12 no.4
• /
• pp.110-114
• /
• 2017

Using a small mobile wireless network as a supplement to the disaster safety network can be useful for eliminating small radio shadowing areas, reducing traffic overloads in disaster areas, and quickly building a disaster communication network in difficult access areas. Potable base station is needed to build a small mobile wireless network, and the portable base station using TVWS(TV White Space) is effective in terms of utilization of radio frequency resources and construction cost of wireless networks. In this paper, we design and implement a power amplifier for portable base station operating in TVWS. The implemented power amplifier operates at 470 ~ 698MHz. The gain of the implemented amplifier is more than 20.1dB, the input/output return loss is more than 11.4dB, and the isolation is more than 39.9dB when the output is off. The IMD characteristic of the power amplifier has characteristics of 61.0dBc with 18.8dBm output at 470MHz, 59.3dBc wih 18.6dBm output at 550MHz and 56.5dBc with 19.0dBm output at 690MHz. The power amplifier implemented in this paper can be used as a power amplifier for portable base station.

• Journal of Navigation and Port Research
• /
• v.27 no.2
• /
• pp.209-215
• /
• 2003

In this paper. We tested and fabricated the error amplifier for the 15 Watt linear power amplifier for the IMT-2000 baseband station. The error amplifier was comprised of subtractor for detecting intermodulation distortion, variable attenuator for control amplitude, variable phase shifter for control phase, low power amplifier and high power amplifier. This component was designed on the RO4350 substrate and integrated the aluminum case with active biasing circuit. For suppression of spurious, the through capacitance was used. The characteristics of error amplifier measured up to 45 dB gain, $\pm$0.66 dB gain flatness and -15 dB input return loss. Results of application to the 15 Watt feedforward Linear Power Amplifier, the error amplifier improved with 27 dB cancellation from 34 dBc to 61 dBc IM$_3$.

• Korean Journal of Optics and Photonics
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2000

We have numerically solved rate-equations of semiconductor optical amplifier (SOA) to understand the characteristics of SOA. The rate-equations we have used can describe injection carrier density, amplified spontaneous emission and signal photon density in spatial and time domain by dividing the cavity into multi-section. We have investigated injection carrier density, amplified spontaneous emission and signal photon density as a function of position and time in the case of single channel input in the form of square pulse. Also we have analyzed the non-linear phenomena of SOA in the case of injecting multi-channel wavelengths as in WDM. Intermodulation distortion (IMD) caused by beat among channels has significant effects on the signal distortion as the channel spacing becomes narrower, and channel crosstalk becomes larger as the power of signals increases. In the case of the injection of another CW laser whose wavelength is far enough from the signal wavelengths, the crosstalk and the output signal distortion can be significantly reduced. duced.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.16 no.12 s.103
• /
• pp.1239-1245
• /
• 2005

In this paper, a new predistortion linearizer using second harmonic components feedforwarding is proposed. The harmonic generator of the proposed predistorter that consists of a small signal amplifier extracts second harmonic signals. A vector modulator that modulate fundamental signal with second harmonic signals, generates the inverse third order intermodulation distortion signals and controls amplitude/phase of them with modulation factors. As a result, this linearizer is suppressed IMD3 signals of power amplifier effectively. The test results show that the third order IMD of power amplifier is suppressed more than 20 dB for CW two-tone signals. Also, it's improved the adjacent channel power ratio(ACPR) more than 5 dB for CDMA(IS-95) 4FA signals.