• 제목/요약/키워드: Intermediate support

검색결과 241건 처리시간 0.035초

예비유아교사의 놀이성과 놀이교수효능감과의 관계 (A Study of The Relationship Pre-Service Early Childhood Teacher's Playfulness and Play Teaching Efficacy)

  • 박은주
    • 한국엔터테인먼트산업학회논문지
    • /
    • 제14권2호
    • /
    • pp.131-139
    • /
    • 2020
  • 본 연구의 목적은 예비유아교사의 놀이성과 놀이교수효능 간의 관계를 알아보는 것이다. 연구대상은 대구 지역 K전문대학 유아교육과에 재학 중인 3학년 145명이다. 연구를 위해서 놀이성과 놀이교수효능감 설문지를 사용하여 검사 하였다. 수집된 자료는 SPSS 18.0프로그램을 사용하여, 빈도분석, 기술통계, 상관분석, 단계적 중다회귀분석을 실시하였다. 본 연구의 주요 결과는 다음과 같다. 첫째, 예비유아교사의 놀이성과 놀이교수효능감 모두 보통수준으로 나타났다. 둘째, 예비유아교사의 놀이성과 놀이성은 유의미하게 상관관계가 있었다. 셋째, 예비유아교사의 놀이성이 놀이교수효능감에 미치는 상대적 영향력을 알아본 결과 주로 놀이성의 하위변인 중 쾌활성과 즉흥성이 주로 통계적으로 유의미한 영향을 미치는 것으로 나타났다.

소기업의 R&D역량이 조직역량 및 R&D사업화에 미치는 영향 (The Impacts of R&D Capabilities of Small Companies on Organizational Competences and R&D Commercializing Performances)

  • 김선하;홍진환;이훈희
    • 중소기업연구
    • /
    • 제43권3호
    • /
    • pp.21-42
    • /
    • 2021
  • 소기업의 성장과 경쟁력 강화를 위한 연구개발(R&D) 활동이 점점 중요해지고 있으며, 정부의 R&D 지원금도 증가하고 있다. 본 연구는 소기업의 R&D 성과를 제고하기 위해, 자원기반론적 관점에서 소기업의 R&D 성과에 영향을 미치는 요인과 필요한 역량을 파악하였다. 정부 R&D 지원사업에 참여하여 R&D 프로젝트를 완료한 소기업 3,636개사를 대상으로 설문 조사를 수행하였으며, 다중회귀분석을 실시하였다. 소기업의 기술혁신역량과 기술사업화역량은 조직 역량에 유의한 정(+)의 영향을 미치며, 그 관계를 기업가정신이 조절하는 것으로 나타났다. 또한 소기업의 R&D 역량은 R&D 사업화 성과에 직접 유의한 영향을 미치는 것이 아니라, 조직역량을 매개로 R&D성과에 유의한 영향을 미치는 것으로 분석되었다. 본 연구는 소기업 R&D의 성과 분석을 위한 중간 단계의 변수인 조직역량의 중요성을 포함해, 소기업 R&D 성과 측정 및 지원 정책에 대한 시사점을 제시한다.

Moment redistribution of RC continuous beams: Re-examination of code provisions

  • Da Luo;Zhongwen Zhang;Bing Li
    • Structural Engineering and Mechanics
    • /
    • 제85권5호
    • /
    • pp.679-691
    • /
    • 2023
  • Many codes allow designers to use the bending moment diagram computed by elastic analysis and modify it by a certain amount of moment redistribution (MR) to account for plastic behaviour of continuous beams. However, several researchers indicated that the MR at the ultimate limit state (𝛽u) for some beams deviate significantly from the specified values of various codes. This paper examines the applicability of the provisions on 𝛽u in ACI 318-19 and Eurocode 2 through numerical investigations and comprehensively explores the influencing factors. The results show that some parameters not considered in those codes influence 𝛽u to a certain extent, where the ratio of tensile reinforcement ratio at intermediate support to tensile reinforcement ratio at midspan (𝜌s1/𝜌s2) and load type are crucial parameters to consider. The specific combination of these two parameters may make the codes overestimate or significantly underestimate the 𝛽u. On the other hand, the yield state of both critical sections is found to have an important influence on the influence degree of each parameter on 𝛽u. The yield conditions are investigated, and an empirical judgment equation is proposed. In addition, the influence laws of the critical parameters on 𝛽u have been further proved by theoretical derivation. Finally, due to 𝜀t is found to have a better linear correlation with 𝛽u than xu/d, equations as a function of 𝜀t for predicting the 𝛽u of continuous beams under the two loads are proposed, respectively.

정주계층별 농촌생활서비스 기능정립 및 취약지역 기준에 관한 연구 (A Study on Establishment of Rural Living Service Functions by Settlement Class)

  • 조영재;윤정미;한승석;조승현
    • 농촌계획
    • /
    • 제29권4호
    • /
    • pp.13-26
    • /
    • 2023
  • Recently, South Korea has prepared laws and systems to systematically manage rural spaces in response to the era of population decline and is making various efforts to promote related policies. However, various basic studies that can support this are still insufficient. In particular, in this study, the functions and roles of each settlement class were established along with the classification of the sedentary classes in rural areas, and the classification system for rural living services was established, and the hierarchy by functional facilities and the minimum standards for vulnerable areas (accessibility) were established. Specifically, in this study, the settlement class was divided into 4 classes of "central area - midpoint area - small point area - hinterland", and each function and role was presented, and the rural living service classification system was finally reestablished as 10 sectors and 31 functional facilities. In addition, the hierarchy and accessibility standards of rural living service functional facilities was set within 5 to 15 minutes for 'lower and basic services', within 10 to 20 minutes for 'medium and basic services', within 15 to 30 minutes for 'intermediate and complex services', within 20 to 60 minutes for 'high car/complex service' and within 10 minutes for 'urgent service'.

전술메쉬 트래픽 QoS 조율을 위한 네트워킹 노드의 개념 설계 및 실시간 모니터링 (Conceptual Design of Networking Node with Real-time Monitoring for QoS Coordination of Tactical-Mesh Traffic)

  • 신준식;강문중;박주만;권대훈;김종원
    • 스마트미디어저널
    • /
    • 제8권2호
    • /
    • pp.29-38
    • /
    • 2019
  • 정보통신 기술의 발전으로 응용 서비스들을 IP(Internet protocol) 기반으로 통합하는 All-IP 기반 미래형 전술망으로의 전환이 지속적으로 진행되고 있다. 이러한 변화에 대응하기 위해 전술 WAN 노드들이 메쉬구조로 연결된 미래형 전술메쉬망에서 응용 서비스의 QoS(quality of service) 보장을 위해, 인프라 계층과 응용 서비스 계층 사이에 존재하는 전술 서비스 메쉬(tactical service mesh) 계층을 도입하는 것을 시도하는 제안이 있다. 하지만 기존 전술망을 구성하는 폐쇄형 네트워킹 박스들과 정적인 QoS 관제도구들은 전술 서비스 메쉬 계층에서 요구하는 지능형 QoS 조율을 위한 동적 QoS 관제를 지원하는 것이 어려운 상황이다. 따라서 본 논문에서는 SDN/NFV 기반 DANOS 화이트박스 서버스위치를 기반으로 다중-액세스 네트워킹 인터페이스와 가상화된 네트워킹 스위치를 포함하도록 하드웨어/소프트웨어 통합 설계한 전술메쉬 WAN 노드를 구성하는 방안을 제안하고 이를 개념화 수준에서 설계하여 제시한다. 또한 설계한 전술메쉬 WAN 노드에 eBPF 기반의 트래픽 모니터링 방식을 연계하는 방안을 제안하고, 이를 통해 전술 트래픽의 QoS 조율을 지원하는 트래픽 모니터링이 가능함을 검증한다.

산업관련표(産業關聯表)에 의(依)한 임업구조분석(林業構造分析)과 유발생산액(誘發生産額) -임업(林業)이 한국경제(韓國經濟)에 미치는 영향(影響)- (Analysis of Forestry Structure and Induced Output Based on Input - output Table - Influences of Forestry Production on Korean Economy -)

  • 이승윤
    • Journal of the Korean Wood Science and Technology
    • /
    • 제2권4호
    • /
    • pp.4-14
    • /
    • 1974
  • The total forest land area in Korea accounts for some 67 percent of the nation's land total. Its productivity, however, is very low. Consequently, forest production accounts for only about 2 percent of the gross national product and a minor proportion of no more than about 5 percent versus primary industry. In this case, however, only the direct income from forestry is taken into account, making no reference to the forestry output induced by other industrial sectors. The value added Or the induced forestry output in manufacturing the primary wood products into higher quality products, makes a larger contribution to the economy than direct contribution. So, this author has tried to analyze the structure of forestry and compute the repercussion effect and the induced output of primary forest products when utilized by other industries for their raw materials, Hsing the input-output table and attached tables for 1963 and 1966 issued by the Bank of Korea. 1. Analysis of forestry structure A. Changes in total output Durng the nine-year period, 1961-1969, the real gross national product in Korea increased 2.1 times, while that of primary industries went up about 1. 4 times. Forestry which was valued at 9,380 million won in 1961, was picked up about 2. 1 times to 20, 120 million won in 1969. The rate of the forestry income in the GNP, accordingly, was no more than 1.5 percent both in 1961 and 1962, whereas its rate in primary industries increased 3.5 to 5.4 percent. Such increase in forestry income is attributable to increased forest production and rise in timber prices. The rate of forestry income, nonetheless, was on the decrease on a gradual basis. B. Changes in input coefficient The input coefficient which indicates the inputs of the forest products into other sectors were up in general in 1966 over 1963. It is noted that the input coefficient indicating the amount of forest products supplied to such industries closely related with forestry as lumber and plywood, and wood products and furniture, showed a downward trend for the period 1963-1966. On the other hand, the forest input into other sectors was generally on the increase. Meanwhile, the input coefficient representing the yolume of the forest products supplied to the forestry sector itself showed an upward tendency, which meant more and more decrease in input from other sectors. Generally speaking, in direct proportion to the higher input coefficient in any industrial sector, the reinput coefficient which denotes the use of its products by the same sector becomes higher and higher. C. Changes in ratio of intermediate input The intermediate input ratio showing the dependency on raw materials went up to 15.43 percent m 1966 from 11. 37 percent in 1963. The dependency of forestry on raw materials was no more than 15.43 percent, accounting for a high 83.57 percent of value added. If the intermediate input ratio increases in any given sector, the input coefficient which represents the fe-use of its products by the same sector becomes large. D. Changes in the ratio of intermediate demand The ratio of the intermediate demand represents the characteristics of the intermediary production in each industry, the intermediate demand ratio in forestry which accunted for 69.7 percent in 1963 went up to 75.2 percent in 1966. In other words, forestry is a remarkable industry in that there is characteristics of the intermediary production. E. Changes in import coefficient The import coefficient which denotes the relation between the production activities and imports, recorded at 4.4 percent in 1963, decreased to 2.4 percent in 1966. The ratio of import to total output is not so high. F. Changes in market composition of imported goods One of the major imported goods in the forestry sector is lumber. The import value increased by 60 percent to 667 million won in 1966 from 407 million won in 1963. The sales of imported forest products to two major outlets-lumber and plywood, and wood products and furniture-increased to 343 million won and 31 million won in 1966 from 240million won and 30 million won in 1963 respectively. On the other hand, imported goods valued at 66 million won were sold to the paper products sector in 1963; however, no supply to this sector was recorded in 1963. Besides these major markets, primary industries such as the fishery, coal and agriculture sectors purchase materials from forestry. 2. Analysis of repercussion effect on production The repercussion effect of final demand in any given sector upon the expansion of the production of other sectors was analyzed, using the inverse matrix coefficient tables attached to the the I.O. Table. A. Changes in intra-sector transaction value of inverse matrix coefficient. The intra-sector transaction value of an inverse matrix coefficient represents the extent of an induced increase in the production of self-support products of the same sector, when it is generated directly and indirectly by one unit of final demand in any given sector. The intra-sector transaction value of the forestry sector rose from 1.04 in 1963 to 1, 11 in 1966. It may well be said, therefore, that forestry induces much more self-supporting products in the production of one unit of final demand for forest products. B. Changes in column total of inverse matrix coefficient It should be noted that the column total indicates the degree of effect of the output of the corresponding and related sectors generated by one unit of final demand in each sector. No changes in the column total of the forestry sector were recorded between the 1963 and 1966 figures, both being the same 1. 19. C. Changes in difference between column total and intra-sector transaction amount. The difference between the column total and intra-sector transaction amount by sector reveals the extent of effect of output of related industrial sector induced indirectly by one unit of final demand in corresponding sector. This change in forestry dropped remarkable to 0.08 in 1966 from 0.15 in 1963. Accordingly, the effect of inducement of indirect output of other forestry-related sectors has decreased; this is a really natural phenomenon, as compared with an increasing input coefficient generated by the re-use of forest products by the forestry sector. 3. Induced output of forestry A. Forest products, wood in particular, are supplied to other industries as their raw materials, increasng their value added. In this connection the primary dependency rate on forestry for 1963 and 1966 was compared, i. e., an increase or decrease in each sector, from 7.71 percent in 1963 to 11.91 percent in 1966 in agriculture, 10.32 to 6.11 in fishery, 16.24 to 19.90 in mining, 0.76 to 0.70 in the manufacturing sector and 2.79 to 4.77 percent in the construction sector. Generally speaking, on the average the dependency on forestry during the period 1963-1966 increased from 5.92 percent to 8.03 percent. Accordingly, it may easily be known that the primary forestry output induced by primary and secondary industries increased from 16, 109 million won in 1963 to 48, 842 million won in 1966. B. The forest products are supplied to other industries as their raw materials. The products are processed further into higher quality products. thus indirectly increasing the value of the forest products. The ratio of the increased value added or the secondary dependency on forestry for 1963 and 1966 showed an increase or decrease, from 5.98 percent to 7.87 percent in agriculture, 9.06 to 5.74 in fishery, 13.56 to 15.81 in mining, 0.68 to 0.61 in the manufacturing sector and 2.71 to 4.54 in the construction sector. The average ratio in this connection increased from 4.69 percent to 5.60 percent. In the meantime, the secondary forestry output induced by primary and secondary industries rose from 12,779 million Wall in 1963 to 34,084 million won in 1966. C. The dependency of tertiary industries on forestry showed very minor ratios of 0.46 percent and 0.04 percent in 1963 and 1966 respectively. The forestry output induced by tertiary industry also decreased from 685 million won to 123 million won during the same period. D. Generally speaking, the ratio of dependency on forestry increased from 17.68 percent in 1963 to 24.28 percent in 1966 in primary industries, from 4.69 percent to 5.70 percent in secondary industries, while, as mentioned above, the ratio in the case of tertiary industry decreased from 0.46 to 0.04 percent during the period 1963-66. The mining industry reveals the heaviest rate of dependency on forestry with 29.80 percent in 1963 and 35.71 percent in 1966. As it result, the direct forestry income, valued at 8,172 million won in 1963, shot up to 22,724 million won in 1966. Its composition ratio lo the national income rose from 1.9 percent in 1963 to 2.3 per cent in 1966. If the induced outcome is taken into account, the total forestry production which was estimated at 37,744 million won in 1963 picked up to 105,773 million won in 1966, about 4.5 times its direct income. It is further noted that the ratio of the gross forestry product to the gross national product. rose significantly from 8.8 percent in 1963 to 10.7 percent in 1966. E. In computing the above mentioned ratio not taken into consideration were such intangible, indirect effects as the drought and flood prevention, check of soil run-off, watershed and land conservation, improvement of the people's recreational and emotional living, and maintenance and increase in the national health and sanitation. F. In conclusion, I would like to emphasize that the forestry sector exercices an important effect upon the national economy and that the effect of induced forestry output is greater than its direct income.

  • PDF

우리나라 성인의 걷기운동과 삶의 질의 관련성 (The Relationship between Walking exercise and Quality of Life for Korean Adults)

  • 장영희;김소희;김유숙;정선희;박종
    • 디지털융복합연구
    • /
    • 제11권5호
    • /
    • pp.325-334
    • /
    • 2013
  • 본 연구는 우리나라 도시 지역 성인을 대상으로 걷기운동 정도와 건강관련 삶의 질과의 관련성을 살펴보는데 목적이 있다. 제4기 3차년도(2009) 국민건강영양조사 자료에서 피조사자들 중, 신체활동 설문과 EQ-5D의 5개차원에 대해 적어도 하나 이상 답을 하지 않은 723명을 제외한, 도시에 거주하는 만 19세 이상 남자 3,892명, 여자 3,959명을 포함한 총 성인인구 7,851명을 대상으로 하였다. 연구 결과 건강관련 삶의 질은 성별, 교육수준, 배우자 유무, 월평균소득, 스트레스, 만성질환 수, 건강인식 그리고 걷기운동실천 여부가 통계적으로 유의한 관련을 보였다. 특히 걷기운동 실천을 하는 사람이 그렇지 않은 사람보다 삶의 질이 더 높게 나타났는데 이는 신체 활동을 통한 삶의 질이 비활동군에 비해서 고강도 or 중등도 보다는 걷기운동이 유의한 차이를 보였다. 이는 걷기운동을 할 경우에 건강에 따른 삶의 질이 높아지고 있다는 것을 알 수 있었다. 따라서 지역사회 주민들의 건강관련 삶의 질 수준을 높이기 위해서는 본 연구에서 확인된 내용을 토대로 이들에 필요한 정책적인 지원과 규칙적인 걷기 운동을 통한 효과적인 운동프로그램 개발이 필요할 것으로 생각된다.

크기 가변 유한체 연산기를 이용한 타원곡선 암호 프로세서 (Elliptic Curve Cryptography Coprocessors Using Variable Length Finite Field Arithmetic Unit)

  • 이동호
    • 대한전자공학회논문지SD
    • /
    • 제42권1호
    • /
    • pp.57-67
    • /
    • 2005
  • 고속 스칼라곱 연산은 타원곡선 암호 응용을 위해서 매우 중요하다. 보안 상황에 따라 유한체의 크기를 변경하려면 타원곡선 암호 보조프로세서가 크기 가변 유한체 연산 장치를 제공하여야 한다. 크기 가변 유한체 연산기의 효율적인 연산 구조를 연구하기 위하여 전형적인 두 종류의 스칼라곱 연산 알고리즘을 FPGA로 구현하였다. Affine 좌표계 알고리즘은 나눗셈 연산기를 필요로 하며, projective 좌표계 알고리즘은 곱셈 연산기만 사용하나 중간 결과 저장을 위한 메모리가 더 많이 소요된다. 크기 가변 나눗셈 연산기는 각 비트마다 궤환 신호선을 추가하여야 하는 문제점이 있다. 본 논문에서는 이로 인한 클록 속도저하를 방지하는 간단한 방법을 제안하였다. Projective 좌표계 구현에서는 곱셈 연산으로 널리 사용되는 디지트 serial 곱셈구조를 사용하였다. 디지트 serial 곱셈기의 크기 가변 구현은 나눗셈의 경우보다 간단하다. 최대 256 비트 크기의 연산이 가능한 크기 가변 유한체 연산기를 이용한 암호 프로세서로 실험한 결과, affine 좌표계 알고리즘으로 스칼라곱 연산을 수행한 시간이 6.0 msec, projective 좌표계 알고리즘의 경우는 1.15 msec로 나타났다. 제안한 타원곡선 암호 프로세서를 구현함으로써, 하드웨어 구현의 경우에도 나눗셈 연산을 사용하지 않는 projective 좌표계 알고리즘이 속도 면에서 우수함을 보였다. 또한, 메모리의 논리회로에 대한 상대적인 면적 효율성이 두 알고리즘의 하드웨어 구현 면적 요구에 큰 영향을 미친다.

시각화를 통한 재현의 경쟁과 공존: 신경과학의 얼굴 인식 메커니즘에 관한 논쟁을 중심으로 (Competition and Coexistence of Visual Representations: Controversies about the Mechanism of Face Recognition in Neuroscience)

  • 장하원
    • 과학기술학연구
    • /
    • 제10권2호
    • /
    • pp.107-141
    • /
    • 2010
  • 과학적 활동에서 시각화(visualization)는 새로운 현상을 재현(representation)하기 위한 하나의 방식이다. 특정한 시각화 방식이 믿을만한 재현으로 구성되는 과정은 관련 기구와 실행에 대한 행위자들의 협상과 체화를 수반하는 사회-기술적 과정이며, 이로부터 생산된 시각적 재현은 해당 분과의 사실주의와 인식적 가치에 의해 정당성을 획득한다. 이 논문에서는 얼굴 인식 메커니즘에 대해 서로 다른 주장을 제시하는 두 과학자 그룹이 논문에 제시하고 있는 시각적 이미지들을 분석함으로써, 이들이 특정한 시각화 방식을 구성하여 자신들의 연구 가설을 재현하는 과정을 살펴본다. 두 그룹은 동일한 fMRI 기술을 사용했지만, 서로 다른 fMRI 실험 패러다임과 시각적 자극을 사용함으로써 상이한 이론을 뒷받침 하는 시각적 증거를 만들어냈다. 이 때, fMRI 자극으로 활용된 시각적 이미지는 해당 과학자가 특정한 방식으로 현상에 개입하고 자신의 연구 가설을 실험 가능한 것으로 만드는 도구이자, 다른 과학자들과 소통하고 설득함으로써 연구자가 제시하는 해석의 설득력을 높이는 수단이었다. 이렇게 서로 다른 실험 패러다임 속에서 생산된 시각적 증거들은 뇌영상과 이론적 모델 사이를 연결하는 중간 재현물로, 이러한 시각적 재현의 연쇄가 이루는 정합성에 기초해서 얼굴 인식 메커니즘에 대한 서로 다른 주장에 과학적 가치가 부여되었다. 본 논문의 사례와 같이, 같은 현상에 대한 상이한 재현이 공존하는 현상은 이러한 재현이 과학자 사회 내부의 맥락에 철저히 의존해서 만들어지는 것임을 드러내며, 이는 과학적 지식의 가치와 한계를 다시 생각해볼 수 있는 기회를 제공할 것이다.

  • PDF

작업기반 중재(Occupation-Based Practice)에 대한 인식 및 실행 조사연구 (A Study of Awareness and Implementation of OBP(Occupation-Based Practice))

  • 장기연
    • 대한지역사회작업치료학회지
    • /
    • 제7권2호
    • /
    • pp.19-31
    • /
    • 2017
  • 목적 : 본 연구는 국내 작업치료사들의 작업기반 중재에 대한 인식도와 실행현황을 알아보고 이를 작업기반 중재 관련 기초자료로 사용하고자 시행하였다. 연구방법 : 국내 임상작업치료사 300명을 편의 표집하여 구조화된 293부의 설문지를 배포하였고 응답한 288부의 설문지를 분석하였다. 결과 : 작업기반 중재에 대한 인식도는 평균 5.7점으로 남자가 여자보다, 연령과 임상경력이 많을수록 인식도가 높았으나 성별을 제외하고는 유의하지 않았다. 작업기반 중재를 접하게 된 계기는 전공수업, 논문 및 세미나, 동료의 소개 및 기타 등이었으며 연령과 학력, 기관소재지, 임상경력에 따라 관련성에 유의한 차이가 있었다. 작업기반 중재를 임상에서 사용한다고 응답한 인원은 152명(52.8%)으로 사용하지 않는 경우보다 많았다. 사용여부는 근무지를 제외하고 성별, 연령, 임상경력, 학력에 따른 관련성의 차이가 모두 유의미하지 않았다. 작업치료 전체 과정 중 상담, 중재, 목표설정, 평가와 문서화 순으로 작업기반 중재를 사용하는 빈도가 높은 것으로 나타났다. 작업기반 중재를 사용하는 목적은 클라이언트의 삶에서 의미있는 작업을 찾기, 클라이언트의 가정이나 지역사회활동에 참여를 촉진, 클라이언트 기능회복을 위한 치료 등의 순으로 나타났다. 작업기반 작업치료를 시행하는 동안 어려움을 느꼈던 부분은 클라이언트 및 보호자의 작업에 대한 이해 부족이 가장 많았고 작업치료실 환경의 제약 및 도구의 부족, 관련 지식 및 활용방법 이해의 부족, 치료 준비 시간 부족, 치료비/보험 수가 적용의 어려움 등의 순으로 높은 응답을 보였다. 결론 : 작업기반 중재의 인식도와 실행 정도는 중간 수준으로 나타났으며 교육수준 및 치료환경과 관련이 있음을 알 수 있었다. 본 연구결과를 토대로 작업기반 중재를 현재보다 활성화하기 위한 교육의 시행과 임상 환경의 조성을 위해 제도적, 학술적 논의와 지원이 선행되어야 할 것이다.