• Nuclear Engineering and Technology
• /
• v.53 no.7
• /
• pp.2126-2132
• /
• 2021

Various research groups and private interprises are pursuing the design of a Molten Salt Reactor (MSR) as one of the Generation-IV concepts. In the current work a fast neutron MSR using chloride fuel is analyzed, specially analyzing the power production and neutron flux level in the Intermediate Heat Exchanger (IHX). The neutronic analysis in this work is based on a chloride-fuel MSR with 600 MW thermal power. The core power density was set to 100 MW m-3 with a core H/D [[EQUATION]] 1.0 amd four Intermediate Heat Exchanger (IHX). This leads to a power of 150 MW per IHX; this power is also comparable to the IHX proposed in the SAMOFAR framework. In this work, a preliminary design of a 150 MW helical-coil IHX for a chloride-fueled MSR is prepared and the fission rate, capture rate, and inelastic scatter rate are evaluated.

• Korean Journal of Ecology and Environment
• /
• v.45 no.3
• /
• pp.314-321
• /
• 2012

To quantitatively assess the effects of turbidity on egg development and larval fish survival, a laboratory fish rearing experiment was applied to different life stages (newly hatched larval stage, juvenile stage and pre-adult stage) of the Zacco platypus, one of the most universal and tolerant species in Korea. According to the stress index of turbidity in water with exposure time, three different treatments, including a reference condition (1~7 NTU) as well as intermediate (20~150 NTU) and high turbidity conditions (400~1,000 NTU) were applied, and egg hatching and larval fish mortality rates were observed. The mortality rates of newly hatched larval fish were significantly different among treatments (ANOVA, $F_{2,3}$=17.79, p<0.05). Average rates of survival to hatching were 20.9% (${\pm}0.1%$) for reference condition, 11% (${\pm}6.9%$) for intermediate level and 3.2% (${\pm}3.7%$) for high level conditions, respectively. A sudden change of mortality at the high level was observed within 5 days of the experiment. About 84% of juvenile fish survived until 20 experimental periods under conditions of reference turbidity, while survival under conditions of intermediate turbidity was over 80% of larval fish until day 13 of the experiment, but dropped to less than 10% after day 14 and 15 of two experiments. Fish mortality appeared from day 6 of the high turbidity experiment, and 50% mortality was achieved at day 9 to 10 of experiment. Full mortality occurred at day 14 of the experiment (RM-ANOVA, $F_{2,38}$, p<0.005). In the pre-adult stage experiment, no mortality was observed during the experiment at reference level treatment (20 days), while only slight mortality rates were observed for both intermediate and high levels until day 5 of the experiment, however, no further fish died in either experiment. It was significantly different compared to reference condition (RM-ANOVA, $F_{2,20}$=8.28, p<0.01), but no difference was observed between intermediate and high level conditions. Consequently, this tolerant species has been determined to be well adapted to high levels of turbidity in its adult stage, but more vulnerable throughout earlier life stages.

• Journal of the Korean Institute of Rural Architecture
• /
• v.26 no.2
• /
• pp.65-72
• /
• 2024

In order to analyze the impact of fine dust generated from a construction waste intermediate processing site on the surrounding areas, diverse types of samples were collected from inside the site and surrounding areas. The impact analysis results of samples are as follows. (1) Compared to the air quality management standards by the Ministry of Environment, the concentration of fine dust within the site was 30 to 46% for PM10 and 14 to 42% for PM2.5, which was not much different from the general air quality level. (2) It was found that PM10 within the site may have a partial effect on the air quality, but when the blocking facilities in the site, wheel washing facilities at vehicle entry and exit route, and sprinkler during working were maintained, the impact on the nearby area was not high. (3) In the case of PM2.5, its concentration was influenced more by the exhaust fumes from work vehicles than fine dust generated during construction waste processing. Since the PM2.5 concentrations in the site and surrounding area were not much different from the general air quality, there was little correlation with the work impact of construction waste intermediate processing sites. (4) Pb, an indicator of heavy metal components, was within 50ng/m³ in all three sites, which was 10% of the domestic management standard and equivalent to the general air quality level. The complaints from residents in nearby areas were filed using indicators based on visual and experiential information in their daily lives, so even if the survey results of environmental impact by the construction intermediate waste processing site are lower than the standard, nearby residents can feel it better than such numerical information. Therefore, specific activities to reduce find dusts should be continuously continued.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.06a
• /
• pp.175-187
• /
• 2004

This paper reviews basic considerations for establishing managerial requirements on the domestic low- and intermediate-level radioactive waste repository and presents the corresponding draft requirements. The draft emphasizes their close linking with the related regulations, standards and safety assessment for the repository. It also proposes a desirable direction towards harmonizing together with the existing waste acceptance requirements for the repository

• The Transactions of the Korean Institute of Electrical Engineers D
• /
• v.49 no.8
• /
• pp.467-472
• /
• 2000

A three-level decoupled sliding mode controller is developed to achieve asymptotic stability for a class of sixth-order nonlinear systems. The sixth-order system is decoupled into three subsystems according to the structure of the whole system. Each subsystem has a separate control target in the form of a sliding surface. The information of the third sliding surface is transferred to the second one through an intermediate variable and the information of the second sliding surface is transferred to the first one through another intermediate variable. Consequently, the controller designed on the basis of the first sliding surface can make three subsystems move toward their sliding surfaces, respectively. The three-level decoupled sliding mode controller is applied to the double-inverted pendulum problem where the zero stable states are required.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1998.10a
• /
• pp.273-273
• /
• 1998

• The Journal of the Korea Contents Association
• /
• v.19 no.12
• /
• pp.68-83
• /
• 2019

The characteristics of intermediate-level waste treatment services are likely to have a negative effect because they act as a factor in promoting incentives of earnings management in the relationship between financial characteristics and earnings management in companies which are possible for earnings management. The researchers conducting this study attempted to empirically verify relationships between financial characteristics and earnings management against domestic construction waste disposal companies in consideration of the characteristics of intermediate-level waste disposal businesses, and the results are as follows. As construction waste disposal businesses grew larger, and the trade receivables collection period lengthened, the intention to increase profits via real activities strengthened. As the ability to generate cash via sales activities weakened, and the difference between the EBITDA margin and the operating margin was lower than the difference in industrial average ratio, discretionary accruals and earnings management via real activities were greater. In particular, there were differences in the variables of intermediate treatment business characteristics which reveal moderating effects by financial characteristics. This study is meaningful in that the scope of relationships between financial characteristics and earnings management in accounting is expanded to cover the construction waste disposal industry.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.23 no.2
• /
• pp.59-67
• /
• 2017

Purpose: The purpose of this study was to survey of satisfaction of clinical education program in KAOMPT for three years. Methods: The subjects of this study were consisted of physical therapist who participated the education program of KAOMPT from 2014 to 2016. 7387 structured questionnaires were analysed for this study. The satisfaction levels of each item were measured by 5-point Likert scale. Results: The highest satisfaction level were teaching method in introduction course, and practice method in basic, intermediate and advance courses. The average of satisfaction level was $4.03{\pm}84$ in introduction, $4.40{\pm}74$ in basic, $4.30{\pm}80$ in intermediate and $4.39{\pm}76$ in advance course each. The higher satisfaction was showed in men than woman. The lowest satisfaction level in below 25 years old group than the other aged groups. There were no differences of satisfaction level among the working place groups. the satisfaction level was higher in the group of over eight year experienced group than below three year experienced group. Conclusions: It is assumed that the clinical education program of KAOMPT was settled as a Korean manual therapy education center.

• Cross-Cultural Studies
• /
• v.22
• /
• pp.303-327
• /
• 2011

This study aims to uncover the learner's language proficiency shown in the writing data of Chinese elementary/intermediate level learners. Language proficiency of the learners acquired by error analysis provides only partial information, and thus this study analyses the interlanguage of Korean learners in terms of 'Mean Length of Utterance, MLU' to discover the overall aspect of learner's language proficiency more symmetrically. The analysis of vocabulary area is to be enforced after generally studying the learner's language development aspect in accordance with MLU-m(orpheme) and MLU-(w)ord found in compositions by Chinese speaking Korean language learners. In terms of MLU, it has been slightly increased as the level of proficiency between elementary level and intermediate level learners; however, the morpheme seemed to be difficult to use, since the difference between Chinese learners and Korean university students has been notably shown. Vocabulary diversity, using aspect for each word class, and using aspect of the predicate are studied for vocabulary area; more various and numerous vocabulary tend to be used as the level of proficiency increases. In terms of predicate use, Chinese learners use less numerous vocabulary types.

• Korean Journal of Applied Biomechanics
• /
• v.20 no.3
• /
• pp.319-325
• /
• 2010

The purpose of this research was to investigate the differences in the ski carving turn motion according to level of expertise. The posture and movement of 6 skiers nearby the fall-line was evaluated with a biomechanical approach focusing the rotational mechanics. The slope was at an angle of $9^{\circ}$ and the following variables were measured and calculated: tangential velocity, change of COM height after passing fall-line, width between feet, angle between upper body and thigh, trunk angle, average radius of curvature and average centripetal force. The expert skiers minimized their center of mass height movement and maintained the width of between their feet after the passing the fall-line in comparison with the beginners and intermediate skiers. The experts restrained themselves from pushing their upper body downward after the turn to maximize the centripetal force. The experts in comparison with the beginners and intermediate skiers during the turn didn't have to reduce their radius of curvature to maintain a high centripetal force. It was concluded, that the most important factor affecting the centripetal force, was for the beginners and intermediate skiers, to minimize their movement while using the appropriate amount of edging.