• Korean Institute of Interior Design Journal
• /
• v.20 no.3
• /
• pp.249-258
• /
• 2011

As the elderly population are rapidly growing, the elderly who needs special care and nursing homes for them are also growing. However, many nursing homes were planned without considering the hierarchial space organization such as division of housing unit and nursing unit based on the cognitive and behavioral characteristics of the elderly or accessibility and supportiveness of the staff. This study was to examine the hierarchial characteristics in space organization of nursing homes by using Space Syntax. The subjects were 8 nursing homes in Busan. First, spaces in nursing homes were divided into five areas based on the literature review. Then the hierarchy of space organization for the access layer and layers of living floors was grasped by using G-graph. The access layer has a tree-type hierarchical structure and high visuality. Also, average depth of the space was 5. Then the full integration was analyzed. Mobile area, such as elevator, hallways, or living rooms has a high accessibility and the middle corridor type has commonly been characterized. The nursing stations were analyzed through the control degree and it was low in three nursing homes such as B, C, and G. The low clarity was showed in B, D, and F. The low clarity means that it is relatively difficult to recognize the whole space organization of nursing home. Even though the hierarchy of their living floors was tree-type structure with a high visuality, they has a type of grouping spaces around hallways and spreading, or a ring type.

• Korean Journal of Environment and Ecology
• /
• v.5 no.1
• /
• pp.68-78
• /
• 1991

To investigate edge vegetation structure and species in the Chrisan National Park, filed survey was excuted from August to October, 1991 and the results were as follows. Importance values of species in lower layer were changed according to the distance from edge to forest interior at the northeastern slope of a highland. Change of vegetation structure was observed from edge up to 30m of forest interior and edge depth was estimated as 15~20m. The dominance and frequency of edge species seemed to be affected by the factors of altitude, aspect and topographic location. Especially, edge vegetation showed severe difference according to topographic location between a ridge and a foot of a mountain, and according to aspect between southern and northern slope above midslope region of a mountain. Comparing vegetation structure of lower layer for southern and northern slope, more no. of individuals and crown coverage were observed at northern slope, while more no. of species, species diversity and coverage of Sasa purpurascen at southern slope.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.20 no.1
• /
• pp.118-125
• /
• 2016

This paper proposes the appropriate waterproofing methods for underground structures after applying different types of waterproofing materials on the concrete test specimens and selecting the best results out of humidity testing in winter conditions. Results of the testing showed that the underground structures absolutely require relevant waterproofing application based on the environmental conditions; when applied with interior waterproofing, the results showed that the concrete maintained high level of humidity and reinforcing steel within the concrete layer corroded. However, when applied with exterior waterproofing, it was shown that the waterproofing layer prevent direct contact with water and concrete, thereby protecting the concrete structure and improving overall durability. It follows that during underground structure construction, exterior waterproofing methods are have shown by an effective method for improving the durability as well as providing a comfortable interior environment for users.

• The Korea Journal of Herbology
• /
• v.29 no.4
• /
• pp.61-67
• /
• 2014

Objectives : To present a differential standard of Armeniacae Semen and Persicae Semen that are easily confused. Methods : It was planed a differential standard form through outer appearance of the original plant, outer appearance in the form of each medicines and the appearance of the interior form through a microscope for each samples. Using an standard compound amygdalin, each samples have been analyzed by HPLC and TLC. Results : It was possible to distinguish the orignal plant between Armeniacae Semen and Persicae Semen through its leaf shape and calyx type. In Outer appearance in the form of each medicines, there was no difference pre-existing method(measuring length and width). In vascular pattern of the surface, however, there was a clear difference that Armeniacae Semen was developed more reticulated branches than Persicae Semen. In appearance through a microscope, it has not been possible to find a clear difference in the per original plant. However, there was a clear difference between Armeniacae Semen(1 layer) and Persicae Semen(3 layer) in inner albubemen cell. In TLC analysis, there was no difference in the pattern between samples. But in HPLC analysis, Armeniacae Semen showed amygdalin content higher on average. Conclusions : It will be possible to find various differences in the outer appearance of the original plant, the outer appearance in the form of each medicines, the appearance of the interior form through a microscope and physical and chemical research component.

• Journal of Welding and Joining
• /
• v.13 no.3
• /
• pp.134-146
• /
• 1995

Aluminium nitride(AlN) is currently under investigation as potential candidate for replacing alumium oxide(Al$_{2}$ $O_{3}$) as a substrate material for for electronic circuit packaging. Brazing of aluminium nitride(AlN) to Cu with Ag base active alloy containing Ti has been investigated in vacuum. Binary Ag$_{98}$ $Ti_{2}$(AT) and ternary At-1wt.%Al(ATA), AT-1wt.%Ni(ATN), AT-1wt.% Mn(ATM) alloys showed good wettability to AlN and led to the development of strong bond between brate alloy and AlN ceramic. The reaction between AlN and the melted brazing alloys resulted in the formation of continuous TiN layers at the AlN side iterface. This reaction layer was found to increase by increase by increasing brazing time and temperature for all filler metals. The bond strength, measured by 4-point bend test, was increased with bonding temperature and showed maximum value and then decreased with temperature. It might be concluded that optimum thickness of the reaction layer was existed for maximum bond strength. The joint brazed at 900.deg.C for 1800sec using binary AT alloy fractured at the maximum load of 35kgf which is the highest value measured in this work. The failure of this joint was initiated at the interface between AlN and TiN layer and then proceeded alternately through the interior of the reaction layer and AlN ceramic itself.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.1
• /
• pp.71-80
• /
• 2007

A control approach for the sensorless speed control of interior permanent magnet synchronous motor(IPMSM) based on adaptive integral the binary is proposed. With a main loop regulator and an auxiliary loop regulator, the binary observer has a property of the chattering alleviation in the constant boundary layer. However, the width of the constant boundary limits the steady state estimation accuracy and robustness. In order to improve the steady state performance of the binary observer, the binary observer is formed by adding extra integral augmented switching the hyperplane equation. By mean of integral characteristics, the rotor speed can be finely estimated and utilized for a sensorless speed controller for IPMSM. The proposed adaptive integral binary observer applies an adaptive scheme, because the parameters of the dynamic equations such as the machine inertia or the viscosity friction coefficient is not well known and these values can be easily changed generally during normal operation. Therefore, the observer can overcome the problem caused by using the dynamic equations, and the rotor speed estimation is constructed by using the Lyapunov function. The experimental results of the proposed algorithm are presented to demonstrate the effectiveness of the approach.

• Korean Institute of Interior Design Journal
• /
• v.14 no.6 s.53
• /
• pp.66-74
• /
• 2005

The purpose of this study analyzes an expression method and a characteristic of transparency of a surface in commercial space, and it is to show an index of a surface design. We did image evaluation by SD method for the commercial space which directed transparency to a surface as the method. We used a factor analysis and cluster analysis to get the image characteristic and type of the expression methods. As a result, we got six following expression methods and design indexes. (1) Transparency expression of a surface by a multiple layer. (2) Transparency expression of a surface by unification with a structure. (3) Transparency expression of a surface by transparency of materials. (4) Transparency expression of a surface by a combination of various materials. (5) Transparency expression of a surface by unification of the image media. (6) Transparency expression of a surface by transparency transformation of materials. We think that it will be able to make use of these results as a design index for the surface design of a commercial space in the future.

• Korean Institute of Interior Design Journal
• /
• v.14 no.5 s.52
• /
• pp.52-61
• /
• 2005

Ecological traces appearing in contemporary architecture are based on modern architecture and most aspects on the contemporary architecture are related with the successive trend or break of the modern architecture. The concept of environment in the modern age has established clear destination, as it has been considered as nature. The architecture under a mechanical world view in the modem age has sustained the opposing connection with nature as environment. However, there have been architects maintaining the sympathy with nature in that vortex. This trend has been regarded as same context as ecological architecture and estimated to the outpost of ecological characteristics appearing in the contemporary architecture. This study is to make it clear that the ecological manifestation in the contemporary architecture is based on the ecology in the modem architecture through considering ecological ideals of architects in the modern architecture and considering space composition and structural properties in the modern architecture of ecological paradigm. The scope of this study contains spacial analysis, design strategy, and design types of organic architecture in nature, which has appeared from the modern age. First, the division into period is carried out according to the organic tendency of non-mainstream in the modern architecture: Arts and Crafts Movement, Art Nouveau, Sezession, Expressionism, Organic Architecture, Regionalism, Internationalism. Therefore, this study is significant to be on the search for a start to suggest ecological point of view to architectural space in modern architecture and is search organic characteristics for ecological characteristics in modern architecture; organic relation, thermal buffer space, regionalism, multi-layer, energy efficiency.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1992.04a
• /
• pp.58-64
• /
• 1992

It is usual that underground structures are constructed within multi-layered medium. In this paper, an efficient numerical model ling of multi-layered structural systems is studied using coupled analysis of finite elements and boundary elements. The finite elements are applied to the area in which the material nonlinearity is dominated, and the boundary elements are applied to the far field area where the nonlinearity is relatively weak. In the boundary element model 1 ins of the multi-layered medium, fundamental solutions are restricted. Thus, methods which can utilize existing Kelvin and Melan solution are sought for the interior multi-layered domain problem and semi infinite domain problem. Interior domain problem which has piecewise homogeneous layers is analyzed using boundary elements with Kelvin solution; by discretizing each homogeneous subregion and applying compatibility and equilibrium conditions between interfaces. Semi-infinite domain problem is analyzed using boundary elements with Melan solution, by superposing unit stiffness matrices which are obtained for each layer by enemy method. Each methodology is verified by comparing its results which the results from the finite element analysis and it is concluded that coupled analysis using boundary elements and finite elements can be reasonable and efficient if the superposition technique is applied for the multi-layered semi-infinite domain problems.

• Journal of The Korean Digital Architecture Interior Association
• /
• v.13 no.4
• /
• pp.61-68
• /
• 2013

Concrete structure is not the only material vulnerable to physical and chemical processes of deterioration associates with severe conditions. Deterioration of the concrete structure, however, occurs more progressively from the outside of the concrete exposed to severe conditions. Especially, Carbonation, chloride ion attack is more important factor of concrete durability. This study is interested in manufacturing the self-cleaning concrete surface impregnant including TEOS, lithium silicate for the repair of the exposed concrete surface and the color concrete requiring the advanced function in view of the concrete appearance. Form the results, TEOS and lithium silicate are very effective that increasing the concrete durability using self-cleaning concrete impregnant. Self-cleaning concrete impregnant specimens is satisfied with performance requirement of KS standard in adhesion test in tension but the reinforcement of concrete substrate is slight. So, the self-cleaning concrete impregnant of this study is more desirable for the improvement of durability rather than the reinforcement.