• Proceedings of the Korean Society of Crop Science Conference
• /
• 2017.06a
• /
• pp.3-3
• /
• 2017

The question of how to establish sustainable agricultural systems has become as prominent as questions related to water, energy and climate change. High input/high output agriculture has brought with it many adverse effects; the massive deterioration of soil and water in both quantity and quality, increased greenhouse gas emissions and an increased prevalence of unsafe foods. Additionally, urbanization and climate change has worsened the shortage of farmland and reduced the supply of agricultural water. Given these challenges, maintaining, conserving and efficiently using agri-environmental resources, through fostering of sustainable agriculture, have emerged as key tasks in solving these problems. What is needed therefore is research, based on systematic and comprehensive empirical analyses, that can propose plans and methods for establishing an appropriate sustainable agricultural system. The empirical analysis of sustainable agricultural system is approached separately from economic, environmental and social aspects. An analysis of environment effect reveals that the available phosphate level is 1.3~2.1 times greater than the optimal amount in rice paddies, upland fields and orchards. Further examination has revealed that the excess nutrient is polluting both ground water and surface water. Analytical results for economic feasibility show that factors of production have been invested heavily in the rice crop. Under these conditions, sustainable agriculture, including low-input agriculture, appears to be a possible alternative that will facilitate simultaneous improvements in both economic feasibility and environment effects. Analysis results for sociality reveal that social factors include the value of producer, association and interior networks. Social conditions are comprised of leadership, consumers' awareness, education and conflict solutions. In addition, analysis as to the degree investments contribute to improving agricultural value added has revealed that the direct payment program is the most effective instrument. Experts confirm that economic feasibility can be improved by scientific and well-reasoned nutrient management on the basis of soil testing. Farmers pointed to 'economic factors' as being the largest obstacle to switching to the practice of sustainable agriculture. They also indicate 'uncertainty with regards to sustainable agriculture technology' as an impediment to practicing sustainable agriculture. Even so, farmers who believe environmental and regional issues to be the most pressing problems have expanded their practice of sustainable agriculture. The keys to establishing sustainable agriculture system are classified into the following four aspects. Firstly, from an economic aspect, the research indicates that agricultural policy needs to be integrated with environmental policy and that the function of market making based on the value chain needs to be revitalized. Secondly, from an environmental aspect, there is a need for an optimal resource management system to be established in the agricultural sector. In addition, sustainable agriculture practice will need to be extended with attendant environmentally-friendly and sustainable intensive technology also requiring further development. Thirdly, from a social aspect, green agriculture management needs to be fostered, technology and education extended, and social conflict mediated. Lastly, from a governance aspect, it will be necessary to strengthen good governance, assign and share suitable roles and responsibilities, build a cooperation system and utilize community supported agriculture.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2004.10a
• /
• pp.145-149
• /
• 2004

It is necessary for managing a perfect process for degasing aluminum molten metal according to the increase of a grade of aluminum and its alloy products. There are some methods that have been used to manage a degasing process in recent years, such as an injection method that uses aluminum molten metal powder and chemicals supplier and input method that supplies argon and nitrogen, or chlorine gas by using a gas blow-tube. However, these methods show some problems, and it shows that it is a difficult process to handle. pollution due to the producing a lot of toxic gases like chlorine and fluoride gas. irregular effects, and lowering work efficiency due to the excessive processing time. The problems that are the most fatal are the producing a lot of sludge due to the reaction of aluminum molten metal with chemicals. loss of metals, and decreasing the life of refractory materials. In order to solve these problems. this paper develops a technology that is related to aluminum continuous casting molten metal and monolithic degasing apparatus. A degasing apparatus developed in this study improved the exist ing methods and prevented environmental pollution wi th smokeless. odor less, and harmlessness by using a new method that applies argon and nitrogen gas in which the methods used in the West and Japan are eliminated. The developed method can significantly reduce product faults that are caused by the production of gas and oxidation because it uses a preprocessed molten metal with chemicals. In addition. the amount of the produced sludge can also be reduced by 60-80% maximum compared with the existing methods. Then. it makes it possible to minimize the loss of metals. Moreover. the molten metal processing and settling time is also shortened by comparing it with the existing methods that are applied by using chemicals. In addition, it does much to improve the workers' health, safety and environment because there is no pollution. The improvement of productivity and prevent ion effects of disaster from the results of the development can be summarized as follows. It will contribute to the process rationalization because it does not have any unnecessary processes that the molten metal will be moved to an agitator by using a ladle and returned to process for degasing like the existing process due to the monolithic configuration. There are no floating impurities due to the oxidation caused by the contact with the air as same as the existing process. In addition. it can protect the blending of precipitation impurities. Because it has a monolithic configuration. it can avoid the use of additional energy to compensate the temperature decreasing about 60t that is caused by the moving of molten metal. It is not necessary to invest an extra facilities in order to discharge the gas generated from a degasing process by using an agitator. The working environment can be improved by the hospitable air in the factory because the molten metal is almost not exposed in the interior of the area.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.745-755
• /
• 2017

University campuses try to satisfy students' demands. Therefore, the physical environment of university campuses keeps changing. Due to the increasing the number of students and shortage of school building facilities, it is necessary to improve the facilities and create new space in the campus, in order to solve this problem and improve the universities. At the moment, the learning method of university students is evolving toward discussion sessions involving fellow students and presentations utilizing multimedia facilities. In response to these changes, a new type of independent space has appeared, which is called the Group Study Room. In this study, we analyze the spatial characteristics of the Group Study Room. Also, through an IPA(Importance Performance Analysis), this study tries to examine the relationship between the spatial characteristics and users' satisfaction. This analysis is expected to reveal the importance of the spatial characteristics of the group study rooms from the users' point of view. This research can be used for facility planning in universities in the future. The primary aim of this study is to analyze the physical environment of the Group Study Rooms of K university. The secondary aim of this study is to manifest the characteristics of these new learning spaces and to check the space elements of the group study rooms for the sake of efficient planning and management.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.4 no.2
• /
• pp.136-142
• /
• 2016

As the rapid industrialization and modernization progress of the world it is becoming a fast-paced environment pollution. And, dust or environment pollution to solve reckless diggings of natural aggregate cause a serious problem. This study was used a Blast Furnace Slag and Combined Heat and Power Plant of Fly Ash as a cement substitute to reduce $CO_2$ emissions during cement production, this study intend to suggest it's result as basic data 'Properties of Artificial Stone interior or exterior materials type utilizing industrial by-product and waste resource' utilizing Waste Porcelain and Waste Glass. As a result, it was high strength that matrix added the Combined Heat and Power Plant of Fly Ash of addition ratio 40%. Also, pre-experiment was conduct as mixing ratio of waste glass, waste porcelain on the basis of the preceding experiment, proper mixing ratio was judged that proper of waste glass, waste porcelain was mixing ratio 60, 70 (%) of appeared surface aggregate ratio more than 45%.

• Journal of Korean Home Economics Education Association
• /
• v.20 no.2
• /
• pp.31-46
• /
• 2008

The purpose of this study is to analyze the contents of elderly housing in the unit "Family Life & Housing" in Technology & Home Economics 9th grade textbooks. The results of this study are as follows: First, the contents, illustrations, pictures, floor-plans, graphs and tables in current unit "Family Life & Housing" varied widely among textbooks and some didn't even contain these informations. Illustrations and pictures which are suit to the content and which contain positive image of space and living should be chosen. Second, most of the contents about elderly housing were concentrated on the life cycle, three-generation housing and universal design, discussed in chapter 'utility of living space.' The unification of overlapped contents and description which don't have stereotype about elderly housing are needed. Not only the interior environment but also the exterior environment of the elders and life-support service for them should be included in the contents. Contents that reflect the change of future population composition and the ratio of three-generation household are required. The elderly housing floor plan needs to be diversified in quantity such as ones which reflect the Korean characteristics or ones which enable person an independent life.

• Korean Journal of Environment and Ecology
• /
• v.17 no.4
• /
• pp.337-345
• /
• 2004

The objective of this study was to monitor vegetation recovery process after timber harvesting at (Mt.) Baekwoonsan Seoul National University Forests, Korea. Two monitoring plots were established in 1994 and woody plant were monitored in 1997, 1999, 2001, and 2003. Vegetation development pattern during last ten years (1994-2003) after timber harvesting were as follows; Styrax obassia, Styrax japonica and Lindera erythrocarpa as of the existing tree were competitive species in the first year after clear-cut, Styrax japonica and Lindera erythrocarpa as of sprout tree and Aralia elata as of seedling were dominant species in the sixth year after clear-cut, and Lindera erythrocarpa, Styrax japonica and Quercus serrata were dominant species from the eighth year to the tenth year after clear-cut. Species diversity index of harvested forest interior was decreased at the southwestern slope while it was increased in the northeastern slope till 6th year and decreased after the 8th year). According to DBH distribution pattern, No. of individuals of Quercus serrata, Styrax japonica and Lindera erythrocarpa showed high frequency in the southwestern slope, and Acer pseudosieboldianum, Styrax obassia, Magnolia sieboldii, Lindera erythrocarpa, and Aralia elata showed good growth in the northeastern slope. There was a difference between slopes in Basal area. It was decreased at the southwestern slopes during the 10th year continuously and it was increased the sixth year however, was decreased after the eighth year at the northeastern slope.

• Journal of Families and Better Life
• /
• v.28 no.6
• /
• pp.35-46
• /
• 2010

The purpose of the study was to identify the potential buyers' consciousness of single-family housing to provide useful data to help future single-family housing supplies in Ulsan. The study selected residents in Ulsan, who were over twenty and had an interest in living in a single-family housing. A survey was conducted from September 11, 2008 to September 25, 2008. The sample consisted of 364 persons who are currently live in Ulsan metropolitan area. The results are as following. About two thirds of the sample had the desire to live in a single-family housing. Moving into a single-family housing had financial preparation as the greatest issue. When moving into a single-family housing, the convenience of the residential district was the greatest consideration, whether or not it is a green environment, pollution level, etc. The potential buyers valued environment-friendly features and also had a very strong desire to own their own house. Many of them wanted to design and build their own single-family housing within a budget of 100-200 million KRW. In terms of the location, there was a higher preference for the riverside or lakeside rural areas outside the city. In terms of size, the preference was less than $330m^2$, which includes $99-132m^2$ for residential. When considering a single-family housing the direction was the most important feature, along with eco-friendly and safer materials and equipments. When building the single-family housing the potential buyers considered the community spaces first with a preference for having three bedrooms and two bathrooms. For the exterior, they wanted a unique shape of roof and there were high preferences for brown and beige colors. In terms of housing complexes, the potential buyers preferred individual unit types over complexes. If they preferred housing complexes, they wanted the cluster form complex with about 10-30 units. The complex also required a park-like setting with a guard system, which shows that convenience and safety were the most important features. In terms of complex management, they considered environmental management as the most important feature. The potential buyers were willing to pay belw 200,000 KRW, which showed their desire to minimize financial burdens.

• Journal of Korean Society of Forest Science
• /
• v.106 no.1
• /
• pp.1-9
• /
• 2017

Forest harvest as large scale artificial disturbance makes edge environment in both clear-cutted and forested habitat. To clarify the development and recovery process of forest edge after disturbances is essential to understand vegetation responses and landscape level consequences such as edge-distance. In Korea, after clear-cutting, edge-related changes of environment and vegetation was not clarified yet. In Korean red pine (Pinus densiflora) forest, by applying space-for-time approach (sites with undisturbed and 1, 3, 10, 16 yr after cutting), the edge-related change of plant abundance and abiotic factors were determined for 20 line-transect (60 m) and 340 ($1m{\times}5m$) quadrats, and clarified depth and duration of the disturbance. Immediately after edge formation, within 15m form the edge, biotic and abiotic factors such as cover, richness, canopy openness, temperature and moisture content exhibited larger changes compared to forest interior. Plant abundance and abiotic variables were stabilized at the level of forest inside within 16 yr and 10 yr after edge creation, respectively. Woody (tree and shrub) species generally was showed larger increment with proximity to edge than did herb or graminoid species. In addition, negative interactions between woody and herbaceous species were detected during the period of forest edge closure. Our results suggested that depth of forest edge formed by clear-cutting of Korean red pine forest was at least from 15 m to 20 m and edge effect were likely sustained more than 16 years. As the first empirical study on edge-distance between two contrast habitats of clear-cutted and adjacent forest in South Korea, the analytical reality on landscape structure and habitat patches can be improved.

• Economic and Environmental Geology
• /
• v.42 no.1
• /
• pp.73-84
• /
• 2009

The stone Buddha and Shrine of Unjusa temple (Korean Treasure No. 797) at Hwasun formed in Koryo Dynasty is unique style which faces each other the back parts of south and north within the stone Shrine. The stone Buddha and Shrine is highly evaluated in historical, artistic and academic respects. But, the stone properties have been exposed in the open system various aspects of degradations weathered for a long time without specific protective facilities. To inquire into relative deterioration and environmental factor, air temperature and relative humidity of the stone Buddha and Shrine were monitored for a year of the indoor and outdoor, respectively. As a result, the temperature shows increase and decrease according to the seasons in the tendency to clear. While the relative humidity is high to keep all four seasons. Highly relative humidity environment induces dew condensation on the interior of stone Buddha and Shrine. The dew condensation is recorded at the spring, summer and winter season. The summer season is double the total of spring and winter season. In the case of summer, dew condensation is long time continued due to high temperature and relative humidity that is kept by more than nearly 100%. There is progress towards chemical weathering throughout dissolve rock properties and alteration on the rock surface. In the case of winter, dew condensation is not kept for a long time as summer. In the winter, which showing a below zero may add physical weathering throughout moisture that happen by dew condensation to repeat freezing and thawing. Therefore, the reduction plan of the relative humidity effect on dew condensation should be prepared.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.44 no.4
• /
• pp.75-85
• /
• 2016

In recent years, natural healing space studies have been done in health care and forestry. However, previous studies have focused on healing effects of natural elements in interior space or natural landscape view. And there is a limit to using the evidence for healing space design. The aim of this study is to discover the relationship between types and effects of healing space for evidence-based design. This study compares and analyzes the mayor images, psychological restorativeness, and satisfaction to identify the effects and differences of natural trail, designed trail, natural shelter, and designed shelter by types of forest space. Collected data is analyzed with a factorial analysis, valiance analysis and multiple regression analysis in SPSS 18.0. The results of this study are as follows: 1) Among five factors consisting psychological restorativeness, natural trail can be achieved with 'being away' and 'compatibility' and designed shelter can be achieved with 'fascination' and 'coherence'., 2) Psychological restorativeness values higher in images with higher excitement, brightness, vitality, and beautifulness as well as in images with lower level of disorder., 3) Among five factors consisting psychological restorativeness, higher forest satisfaction can be achieved with a higher level of 'being away' and 'coherence'. In conclusion, this study contributes to providing fundamental information for design guidelines of healing spaces through identifying the characteristics of healing environment by types of forest space.