• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.15 no.6 s.99
• /
• pp.738-748
• /
• 2005

The ship radiated noise level fluctuates by the difference of interference and reverberation according to measurement methods and environmental conditions. These phenomena cause error of the source level estimation even in the same environment conditions. This paper describes a quantitative analysis and a reduction method for an error value to the source level estimation in spatial and temporal interference environment. The design criteria of the radiated noise measurement array composed of omni-directional hydrophones and the source level accuracy in the deep water range are given. The source level accuracy in the shallow water range is also derived based on the statistical model of the multiple reflection paths. The results are verified using the water tank experiment and the sea trial.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.341-342
• /
• 2006

A physical model for reduction of Electromagnetic Interference(EMI) or its predecessors, Radio Noise, Electrical Noise, or Radio-Frequency-Interference(RFI), is a rapidly expanding digital technology. It covers the frequency spectrum from DC to about 3 GHz EMI is the poisoner which does not allow radio, TV, radar, navigation, and a lot of electrical, electro-mechanical, and electronic and communication devices, apparatus and systems to operate compatibly in a common frequency spectrum environment EMI can result in a jammed radio, heart pacer failures, navigation errors and many other either nuisance or catastrophic events. Therefore, it follows that this spectrum pollution problem has reached international levels of concern and must be dealt with m proportion to the safety and economic impact Involved.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.4
• /
• pp.1954-1971
• /
• 2017

In this work, first, a multiuser detection (MUD) algorithm based on component-level soft interference cancellation and linear minimum mean square error (CLSIC-LMMSE) is proposed, which can enhance the bit error ratio (BER) performance of the traditional SIC-LMMSE-based MUD by mitigating error propagation. Second, for non-binary low density parity check (NB-LDPC) coded high-order modulation systems, when the proposed algorithm is integrated with partial mapping, the receiver with iterative detection and decoding (IDD) achieves not only better BER performance but also significantly computational complexity reduction over the traditional SIC-LMMSE-based IDD scheme. Extrinsic information transfer chart (EXIT) analysis and numerical simulations are both used to support the conclusions.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.11 no.5
• /
• pp.42-48
• /
• 2008

In this paper, we have introduced a Code Division Multiplexing transmission method which is similar to OFDM and analyze ECCM performances. We have verified CDM transmission method has a good LPI performance and a feasible ECCM performance. This capability could be useful for reduction of RF interference which occurs when many equipments operate densely in small area. The equipment that uses CDM transmission method supports variable transmission rate and order-wire effectively and conveniently to user. This CDM method has similar ECCM performance comparing to serial DS method. CDM method has good multi-path signal processing capability and could be useful for mobile communication environment.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.130-133
• /
• 1999

In the view point of further reducing the inter-symbol interferences studied in our previous paper 〔1〕, a quadrature pair of wavelet-based filter banks that are composed of a pair of cosine and sine modulated filter banks is applied to MC-CDMA transmultiplexing. For that fact, the symbol duration gets twice longer than the one in , 〔1〕, the interference effects due to channel overlapping and Doppler spread can be effectively alleviated while increasing the channel utilization efficiency. Moreover, the well-known wavelet properties are exploited to design the prototype filter in such a way to maintain the size of sidelobes much smaller than those of the FFT, the interference reduction effect can be further obtained. To verify the behavior of our proposed quadrature filter bank based MC-CDMA system, the reverse-link bit error rates with respect to SNR under Rayleigh fading and additive white Gaussian noise channel environments are computed. The results show an improved system performance over the conventional MC-CDMA.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.32B no.12
• /
• pp.1565-1571
• /
• 1995

Misalignment of recording head position results in inter-track interference (ITI), which is a primary factor limiting radial(track) density in current digital magnetic channels. This paper proposes a multi- channel adaptive PRML for digital high-density recording channels, and compares it with the conventional single-channel PRML in the presence of ITI for the per- formance evaluation. Simulation results show that the proposed method removes ITI effectively when heal-misalignment occurs, then improving its performance significantly as compared with the single- channel PRML. As a result, it is confirmed that multi-channel adaptive PRML is well suited for high-density recording in digital magnetic channels.

• IEIE Transactions on Smart Processing and Computing
• /
• v.5 no.5
• /
• pp.346-348
• /
• 2016

Coordinated multi-point transmission is a candidate technique for next-generation cellular communications systems. We consider a system with multiple cells in which base stations coordinate with each other by sharing user channel state information, which mitigates inter-cell interference (ICI), especially for users located at the cell edge. We introduce a new user scheduling method that considers both ICI and intra-cell orthogonality. Due to the influence of ICI cancellation and the loss reduction of effective channel gain during the beamforming process, the proposed method improves the system sum rate, when compared to the conventional method, by an average of 0.55bps/Hz for different numbers of total users per cell.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.21 no.4
• /
• pp.53-60
• /
• 2007

In this study, an experiment on the efficient construction method of plate electrodes, the influence of electric potential interference in plate electrodes, and building foundations were explored. The experimental result of the electric potential measurement was taken on the basis of the direction of movement and the condition in which the plate electrodes are laid underground in building foundations. It shows that the construction method of laying the plate electrodes vertically exhibits a more efficient reduction of electric potential in a diagonal direction and on an X axis than laying plates horizontally. For plate electrode construction in an area that has uniform conditions, the parallel joint construction method is more effective than a single construction to reduce earth electrical potential and ground resistance. In addition, a straight arrangement performs well in ground efficiency, compared to the parallel arrangement.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.486-488
• /
• 2015

FSC(Field Sequential Color) LCD has high efficiency, high brightness and color saturation due to 3 times aperture larger than conventional LCD. However it is well known that color break-up (CBU) and color interference are hot issue need to be solved. We propose a novel sequential driving method with edge-lit light guide composed of $16{\times}15$ blocks to reduce CBU and color interference. The experimental results show not only suppression of CBU but also the side effects are minimized.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.8 no.4
• /
• pp.129-133
• /
• 2012

Coordinated multi-point transmission (CoMP) is a candidate technique for next generation cellular communications systems. One of the primary elements discussed in LTE-Advanced technology is CoMP, which can improve cell edge user data rate as well as spectral efficiency due to multiple input multiple output - orthogonal frequency division multiplex (MIMO-OFDM). We consider a system with multiple cells in which base stations coordinate with each other by sharing user channel state information (CSI), which mitigates inter cell interference (ICI), especially for users located at the cell edge. We introduce a new user scheduling method of ICI cancellation and the loss reduction of effective channel gain during the beamforming process, the proposed method improves the system sum rate, when compared to the conventional method by an average of 0.55bps/Hz in different number of total users per cell. It also outperforms the conventional method by approximately 0.38bps/Hz using different SNRs.