• Journal of KIISE:Computing Practices and Letters
• /
• v.12 no.1
• /
• pp.78-89
• /
• 2006

In development of network-enabled consumer electronics, much of the time and effort is spent analyzing and solving network performance problems. In this paper, we define an instance of such problems discovered while developing a commercial home network gateway. We then analyze its cause and propose a solution mechanism. Our home network gateway uses art asymmetric link (ADSL) and suffers from an undesirable phenomenon where downlink traffic interferes with upload speed. We call this phenomenon the network performance interference problem. While this problem can easily be confused with receive livelock caused by packet contention at the input queue, we and that this is not the case. By performing extensive experiments and analysis, we reveal that our problem is caused by packet contention at the output queue and certain intrinsic characteristics of TCP. We devise an ACK-separation queuing mechanism for this problem and implement it in the home network gateway Our experiments show that it effectively solves the problem.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.45-48
• /
• 2003

The plume interference is a complex phenomenon, consisting of plume-induced boundary layer separation, separated shear layer, multiple shock waves, and their interactions. The base knowledge of plume interference effect on powered missiles and flight vehicles is not yet adequate to get an overall insight of the flow physics in plume-freestream flow field. Computational studies are performed to better understand the flow physics of the plume-induced shock and separation for Simple, Rounded, Porous-extension test model configurations. The present study simulates highly underexpanded exhaust plume effect on missile body at the transoni $c^ersonic speeds. In order to investigate the plume-induced separation phenomenon, Simple, Rounded and Porous-extension plate are attacked to the missile afterbody. The computational result shows that the rounded afterbody and the porous-extension wall attached at the missile base can alleviate the plume-induced shock wave and separation phenomenon and improve the control of the missile body.dy.

• The korean journal of orthodontics
• /
• v.24 no.2
• /
• pp.275-294
• /
• 1994

The occlusal interference during adolescent period makes some effects on growth and development and morphological changes. And so, if we could predict the the timing and results of orthodontic treatment who have occlusal interference during adolescent period, it may be helpful for diagnosis and treatment planning of orthodontic treatment. For about those, the purpose of this study was to evaluate the effects of the posterolateral displacement by the metal casting crown with inclined pathway on the mandibular condyle and morphologic changes of mandible in the rat. The experimental animals were thirty six Sprague-Dawley male rats of 8 weeks old. Eight of them was used as control group, and experimental group 1 ( continuous appliance wearing group ) was composed of sixteen and experimental group 2 ( appliance removal group after worn the appliances during 3 months ) was composed of remaining twelve. The animals of experimental grouop 1 were sacrificed after 1, 2, 3, 6 months from beginning of the experiment and experimental group 2 were sacrificed 1, 2, 3 months after removal of the appliance from worn the appliance during 3 months. Both of mandible and temporomandibular joint were observed histologically and radiologically. The results were as follows : 1. In experimental group 1, the mandibular length and lower posterior height were decreased with experimental period, while the lower anterior height was increased, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were profound as compared with control group. 2. In experimental group 1, both of the thickness of the condylar cartilage were thinned in the posterosuperior region, and this phenomenon was more prominent on right than left in 3-Mo experimental period and both sides were marked thinned in 6-Mo experimental period. 3. In experimental group 2, the lower anterior height was low and lower posterior height was high as compared with experimental group 1, and the curvature of lower incisors and lingual inclination of anterior alveolar bone were recovered to control group. 4. In experimental group 2, both of the thickness of the condylar cartilage were thickened in the posterosuperior region, and this phenomenon was more prominent with experimental period. 5. In experimental group 2, the mandibular length was short, lower anterior height was hight, the curvature of lower incisors were profound, and in histologically, both of the thickness of the condylar cartilage were thickened in the posterosuperior region as compared with control group. As shown above, the occlusal interfemce affected the condylar cartilage, curvature of lower incisor, inclination of anterior alveolar bone, mandibular length, and anterior and posterior height. When the interference was removed, significant recover was found in condylar cartilage, mandibular length, and posterior height. Although no significance was found, other items of measurement showed trends for recovery.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.3 s.192
• /
• pp.55-60
• /
• 2007

The electro-acoustic guitar pickup converts the vibration of strings to the electric signals, and delivers them to an amplifier. The vibration of the strings is transferred to the piezoelectric material through the saddle. This paper aims to improve sound quality for electro-acoustic guitars through the finite element analysis of the saddle. Firstly, the conventional pickup is modeled and analyzed with a commercial program called ANSYS. It is obvious that there exists interference phenomenon of stress. A structural modification of the pickup is performed, based on the beam theory. The modified structure is modeled and analyzed. Finally, the fabricated structures are subjected to the measurements and compared with the conventional pickup. It can be concluded that the interference with the modified structure is much less than that with the conventional structure, and that the sound quality is improved with the modified structures.

• The Journal of the Korean dental association
• /
• v.50 no.11
• /
• pp.682-688
• /
• 2012

Surgery first approach in orthognathic surgery is to proceed the orthognathic surgery without preoperative orthodontic treatment. This approach has many advantages, which include a shorter total treatment period, a high level of patient satisfaction due to immediate post-surgical facial improvement, easy postoperative orthodontic treatment due to early normalization of skeletal muscle, and the rapid tooth movement reflecting the regional accelerated phenomenon. However instability due to transient occlusal interference after surgery make worse of long-term skeletal stability. Especially increasing of vertical occlusion caused by interference of interbicupid and molar happen postsurgical skeletal change. Until now, there is no common consensus about treatment protocol of surgery first approach in orthognathic surgery. The purpose of this paper is to introduce our treatment protocol of the surgery first approach and to evaluate indication and limitation with case analysis.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.11a
• /
• pp.30-33
• /
• 2006

Onset voltage plays a crucial role in the design of a spray microthruster. This paper presents an analytical electrostatic model to predict the behavior of onset voltage in an array of emitters. The basic idea of this method is to superimpose the electric potentials obtained from each individual emitter in an array of emitters. The results show that if one emitter operates and the other neighboring emitters are dry, the potential required for cone-jet spraying generally increases as the emitter spacing decreases (due to electrical shielding). However at very close spacing the potential can decrease. If all emitters operate at the same time, the phenomenon that even at very close spacing the onset voltage required for cone-jet spraying increases merely as the emitter spacing decreases.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.4
• /
• pp.201-206
• /
• 2009

The third generation mobile communications system requiring the reliable multimedia data transmission has provided with the reliable voice, data and video services over the variable propagation environment. However the broadband wireless multiple access technologies cause Inter Symbol Interference (ISI) or Multiple Access Interference (MAI) to degrade the performance of W-CDMA (Code Division Multiple Access) system. Constant Modulus Algorithm (CMA) which is frequently used as the adaptive blind equalizers to remove the interfering signal has ill-convergence phenomenon without proper initialization. In this paper, new blind equalization method based on conventional CMA is proposed to improve the channel efficiency, and through computer simulation this is tested over the time varying fading environment of mobile communication system. Consequently, new blind equalization method into concatenated Kalman filter with CMA is verified better than conventional CMA through adopting minimum mean square errors and eye-pattern obtained from algorithm are compared.

• Journal of Internet of Things and Convergence
• /
• v.2 no.1
• /
• pp.23-27
• /
• 2016

There is Generated Moire fringe by fresnel diffraction that explains one of light's physical phenomenon and interference. In this paper, we propose to generate true random numbers by Moire fringe should be used by not pseudo-random number in cryptosystem.

• Journal of Broadcast Engineering
• /
• v.8 no.1
• /
• pp.11-18
• /
• 2003

In this paper, we introduce a novel signal quality enhancement algorithm with a perceptual interference analysis and perceptual convolutional noise suppression. A perceptual convolutional noise is reflected in the audible disturbance that can still be recognized after the additional noise suppression and tonality change which is caused by the noise energy excitation. The enhancement system is organized with a perceptual additional noise suppression part and a perceptual convolutional noise suppression part. Experimental results show that these two parts have an equivalent quality enhancement performance.

• 한국가시화정보학회:학술대회논문집
• /
• 2002.11a
• /
• pp.117-120
• /
• 2002

An experimental research has been carried out for flow control of the shock wave/turbulent boundary-layer interaction utilizing aeroelastic mesoflaps. Various shapes and thicknesses of the mesoflap are tested to achieve different deflections of the flap, and ail the results are compared to the solid-wall reference case without flow-control mechanism. Quantitative variation of skin friction has been measured downstream of the interactions using the laser interferometer skin friction meter, and qualitative skin friction distribution has been obtained by observing the interference fringe pattern on the oil-film surface. A strong spanwise variation in the fringe patterns with a narrow region of separation near the centerline is noticed to form behind the shock structure, which phenomenon is presumed partially related to three-dimensional flow structures associated with both the sidewalls and the bottom test surface. The effect of the shape of the cavity is also observed and it is noticed that the shape of the cavity is not negligible.