• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2010년도 추계학술발표대회
• /
• pp.958-961
• /
• 2010

We can monitor home from any remote location using our existing telephone line. We have already some technologies to perform these types of application such as: Bluetooth, IR. But these are used in a limited area which we can easily come over in our system. Our propose system has two sections one is Remote Section (RS) where the client will place the request and another is Local Section (LS) where the telephone line is connected with an Input Interfacing Circuit (IIC). Input Interfacing Circuit (IIC) receives the frequency and converts frequency to machine language. Output Interfacing Circuit (OIC) sends voice signal to the client as acknowledgement through modem then the client proceeds for the next steps. This system can be used in commercial or industrial purposes such as controlling computer from remote locations, home monitoring system instead of man or any kind of switching.

• 한국산업정보학회논문지
• /
• 제19권1호
• /
• pp.61-67
• /
• 2014

센서 시스템과 같은 저전력 설계를 요구하는 시스템에서 기존의 동기방식의 회로는 낮은 전압에서 지연(delay)이 급격히 증가하여 시스템의 전체 성능을 유지할 수 없을 뿐만 아니라, 공정, 전압, 온도 변이 (PVT variation), 노화 등에 크게 영향을 받아서 올바른 동작을 기대할 수 없다. 따라서, 신뢰할 수 있는 초저전력 설계에서 비동기 회로가 스케일링 이슈를 해결할 수 있는 방법으로 최근 다시 고려되고 있다. 그러나, 디지털 시스템에서 동기회로를 NCL 회로로 모두 대체하는 것은 쉽지가 않기때문에 동기회로와 비동기 회로 사이의 연결이 꼭 필요하다. 본 논문에서는 동기회로와 비동기 회로를 연결할 수 있는 새로운 설계방법을 보이고, 0.18um 공정기술을 사용한 $4{\times}4$ 곱셈기를 사용해서 검증을 하였다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.515-519
• /
• 2004

A Propeller-Anemometer is an instrument used specifically, to measure the wind speed. The accurate measurement of the wind speed is vitally important such required by any weather stations. In this research, the measurand of the instrumentation was the rotational speed of the propeller and the instrumentation result or output data was wind velocity. The speed measured was recorded digitally in the computer by using specific software. A specific sensor used to measure a variable by converting information of the variable (rotational speed of the propeller) into a dependent signal such as electrical signal in form of voltage. The development of Propeller-Anemometer involved few sets of instrumentation process and equipment. It included three major parts, mechanical, electronics and computer. The main instrumentation processes were physical and signal interfacing, signal conditioning, logic interfacing, data transmission to computer and processing the data. Generally, this paper presents the overall concept and design of Propeller-Anemometer Instrumentation. However, an emphasis was mainly in designing and building the interfacing system, hardware and software. Basically, for the first phase of the development, this project designed and built the RS232 terminal using Peripheral Interface Controller (PIC), PIC16F873. The hardware can be interfaced to computer or other compatible devices. This routine converted input voltage from the circuit to speed (velocity) and transmitted them afterwards to the target device by using the RS232 transmission protocol. This implementation implied a computer display as visual interface. For the purpose of this paper, RS232 data transmission was carried out using a Microsoft Visual Basic software routine.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2003년도 춘계전력전자학술대회 논문집(2)
• /
• pp.511-515
• /
• 2003

This paper presents a novel prototype of the utility-interfaced sinusoidal pulse width modulated (SPWM) inverter using the high-frequency flyback transformer fur the small-scale solar photo-voltaic power conditioner (1kW - 4kW). The proposed SPWM power conditioner circuit with a high-frequency link has a function of electrical isolation, which is vital fur solar photovoltaic power conditioner systems with the viewpoint of safety and convenience. The discontinuous conduction mode (DCM) operation of the flyback transformer is also maintained to simplify the topology of the inverter circuit and control scheme. First, the operating principle of the proposed circuit is described far the understanding of the circuit parameters establishment. Then, the digitally constructed SPWM control scheme is presented. The proposed circuit is verified by the computer simulation and the prototype experiment.

• 전자공학회논문지B
• /
• 제31B권9호
• /
• pp.67-75
• /
• 1994

In this paper, we manufactured the continuum receiver system for observing the continuum waves emitted from the continuum sources with using the 14m radio-telescope. The receiving system measures the total power of the continuum sources and consists of DC-amplifier, beam-chopper system. Phase-Locked Loop(PLL) circuit, blanking circuit and its period selection circuit, V/F converter, and counter part which are capable of interfacing with the computer which is used for a data acquisition and making the radio-telescope track the source. We compared the obsevation results which use the existing DVM method with the observation results which use the continuum receiver to measure the total power of the sources. Moreover, by method of beam switching observation which uses newly installed beam chopper system. We can significantly improve the observational efficiency more than the existing position switching observation method.

• 대한전자공학회논문지
• /
• 제26권11호
• /
• pp.1666-1671
• /
• 1989

A novel switched-capacitor circuit for interfacing capacitive microtransducers with a digital system is developed based on the dual-slope integration. It consists of a differential integrator and a comparator. Driven by the teo phase clock, the circuit first senses the capacitance difference between the transducer and the reference capacitor in the form of charge, and accumulates it into the feedback capabitor of the integrator for a fixed period of time. The resulant accumulated charge is next extracted by the known reference charge until the integrator output voltage refurns to zero. The length of time required for the integrator output to return to zero, as measured by the number of clock cycle gated into a counter is proportional to the capacitance difference, averaged over the integration period. The whole operation is insensitive to the reference voltage and the capacitor values involved in the circuit, Thus the proposed circuit permits an accurate differental capacitance measurement. An error analysis has showh that the resolution as high as 8 bits can be expected by realizing the circuit in a monolithic MOS IC form. Besides the accuracy, it features the small device count integrable onto a small chip area. The circuit is thus particularly suitadble for the on-chip interface.

• 수산해양기술연구
• /
• 제24권1호
• /
• pp.1-6
• /
• 1988

For the purpose of making the detection range of fish detection system more longer and computerizing the system a parametric sound source, a timer and a digitizing circuit for the Apple II computer have been studied. The parametric sound of 5 KHz generated by passing AND gate two signals from carrier signal generator of 200KHz with modulator of 5KHz. This parametric acoustic source of 5KHz difference frequency had more higher directional resolution of 10 degrees than single frequency sound of 200KHz. Peripheral interface adaptor MC 6821 was adopted for interfacing to the Apple II personal computer. The timer consisted of six decade binary coded decimal counters (74 LS 190), and the digitizing circuit consisted of a sample and hold (LF 398) and an A/D converter(ADC 0808). The timer with 10KHz clock pulse had the measuring time from 0.1msec to 100sec. This time measuring range was satisfactory for the aim of the fish finding acoustic system.

• 전기전자학회논문지
• /
• 제23권2호
• /
• pp.636-641
• /
• 2019

저항형 센서 브리지들을 인터페이싱 하기 위한 간단한 저항 편차-시간 주기 변환기를 제안한다. 제안된 변환기는 두 개의 2세대 전류 컨베이어(current conveyor II: CCII)로 구성된다. 제안된 변환기는 연산 증폭기 또는 연산 트랜스컨덕턴스 증폭기(OTA)로 구성되는 기존의 변환기들보다 회로 구성이 간단하다는 장점을 가진다. 제안된 변환기를 AD844로 구현한 CCII를 이용하여 PSPICE 시뮬레이션을 진행하였다. 실험 결과는, 변환기가 $100{\sim}500{\Omega}$의 저항 편차 범위에 걸쳐서 $0.01934ms/{\Omega}$의 변환 감도를 가지며 선형 오차는 ${\pm}0.002%$ 이내라는 것을 보여준다.

• 한국항행학회논문지
• /
• 제28권3호
• /
• pp.309-314
• /
• 2024

항공기 인터콤 장비는 조종사, 부조종사를 포함해 항공기 내의 승무원을 포함한 기내 음성 통화 기능을 수행한다. 항공기 개조 개발 사업에서 인터콤을 개발할 경우 추가되는 통신장비 또는 항전장비를 기존 인터콤과 헤드셋을 연동하도록 구성한다. 따라서 개발하는 인터콤은 항공기 헤드셋 마이크를 입력받고, 기존 인터콤에 마이크 신호를 송신하는 구성이 필요하며 일정 수준 이상의 신호품질이 요구된다. 이러한 요구사항을 만족하기 위해 마이크 신호 생성회로를 구성했으나 신호 품질이 불량하여 인터콤 설계 반영이 불가하다 판단했다. 마이크 신호 생성회로 자체의 문제를 없애기 위해 부하효과를 고려한 마이크 신호 브릿지 회로를 구성했고, 기능 및 품질 측정 결과 요구사항에 부합하였다. 본 논문은 마이크 신호 생성회로 및 브릿지 각각의 구성에 대해 제작 및 신호 품질에 대한 시험 결과를 검토한다.

• The Journal of Korean Physical Therapy
• /
• 제13권3호
• /
• pp.509-527
• /
• 2001

The Sun's ray is composed of Infrared(49%), Visible light(40%) and Ultra violet(11%), however the ray getting to the earth is FIR(Far infrared; 60%), IR(Infrared; 20%), and UV(Ultra Violet; 20%). Human beings has utilized FIR already from time immemorial. Hershel found out Infrared for the first time. in the Industrial Revolution the Infrared and FIR had been begun to use making products. In these days, with contemporary science FIR would be begun to clear up the implication in the human body and organic compound. IR classified by wavelength three parts NlR, MIR, FIR. There is FIR which is radiated from healthy human body the wave length is 8-l4m. The human body is composed of proteins which get easily changed by a thermal factor (about 42 $^{\circ}$C over). FIR with low temperature can deeply penetrate on the human body composed things without troublesomes, since FIR has effectively operated on the human body at low temperature (35-40 $^{\circ}$C). When FlR penetrated on the human body. it would inhibit the abnormal genes and cells expression, and then information of DNA and RNA would be reexpressed for arranging DNA and RNA abnormal state. As FlR's receptors in the body, it could be presumed that N-glycosyl linkage of purine and deoxyribose, RNA splicing process, and Heat shock protein. To take the FIR which was a optimized wavewlength and strength, at first, we induced the characteristic algorithm and the computerized programing. Then we formed that the formular of optimized FIR with physical, mathematical logic and theory. especially, Plank, Kirchhoff, Wien, Stefan-Boltzmann's logic and law. In the long run, the formular was induced with integration mathematical, since we had to know the molecular wavelength. Based on the induced formular as above, we programmed the optimized FlR radiating computerized program. In this research, we designed the eletronic circuit f3r interfacing with human body to diagnosis and treatment with FIR sensor which radiated FIR wavelength optimized.