• IE interfaces
• /
• v.13 no.2
• /
• pp.253-257
• /
• 2000

This study was conducted to test the significance of differences in the tactual difference thresholds and perception time for tactual direction type and finger type and radius size based on small circular button. The results show that difference threshold of vertical tactual perception is significantly greater than horizontal perception, but there are no significant differences in difference thresholds among finger types and radius sizes. Also, there are no significant differences in tactual perception time among tactual direction types, finger types, and radius types. These findings are applicable for tactual user interface design.

• Korean Journal of Optics and Photonics
• /
• v.9 no.5
• /
• pp.307-314
• /
• 1998

We have studied the effects of interface on polarization dependence of waveguide and designed the polarization independent 2-dimensional waveguides on InP for arrayed waveguide grating. To figure out the effects of interface on polarization dependence, we have solved the 1-dimensional wave equation using a transfer matrix method. It is shown that the birefringence becomes stronger as the number of interfaces increases. In order to design polarization independent 2-dimensional waveguides, we have used effective index method. The structures considered are ridge type, raised strip type, and buried type waveguide. In the cases of ridge and raised strip type, conventional effective index method was used. In the case of buried type corrected effective index method was used. We have determined the height and width of waveguides such that the waveguides become polarization independent.

• Journal of KIISE:Computing Practices and Letters
• /
• v.9 no.3
• /
• pp.227-240
• /
• 2003

When we develop and use the java-based distributed object system, the system developer must deploy distributed object, which is implemented to predefined interface, to network and the system user acquires reference about distributed object and changes reference to interface type. Sharing of interface is essential for these works In this paper, we propose the IRSJ(interface repository service based on jim) to improve efficiency of interface sharing at the JINI system development. the IRSJ is consisted of the java classes for JINI system and interface sharing service. If development teams perform collaborative work in short distance, the IRSJ can search interface file without information of lookup server or interface writer If development teams perform collaborative work in long distance, the IRJS can search interface with only an address of server that executes lookup service. Although the interface object not requires additional search, the interface object that failed search interface can download interface and use interface using remote event model. When the message service fails in interface search, the message service sends interface request message to a development team member who use the IRSJ automatically, so that interface sharing may be possible in short time.

• Geomechanics and Engineering
• /
• v.20 no.4
• /
• pp.299-312
• /
• 2020

The aim of this paper was to investigating the effects of soil relative density, construction materials roughness, oil type (gasoil, crude oil, and used motor oil), and oil content on the internal and interface shear behavior of sand with different construction materials by means of a modified large direct shear test apparatus. Tests conducted on the soil-soil (S-S), soil-rough concrete (S-RC), soil-smooth concrete (S-SC), and soil-steel (S-ST) interfaces and results showed that the shear strength of S-S interface is always higher than the soil-material interfaces. Internal and interface friction angles of sand beds increased by increase in relative density and decreased by increasing oil content. The oil properties (especially viscosity) played a major role in interface friction behavior. Despite the friction angles of contaminated sands with viscous fluids drastically decreased, it compensated by the apparent cohesion and adhesion developed between the soil grains and construction materials.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.111-115
• /
• 1997

There exists a interface among the different kinds of materials in the solid insulating ones, which effects on the insulating capability heavily. The insulating construction has been developed for each usages and take themselves into several sorts. The conjunction between CV cables have the electrical weakness of solidity and solid interface, so they were focused at the long distance-line. To this background, it is very important to get the information on the interface influencing on the insulating capability of cable and to observe its procedure. In this paper, the interface was made artificially to research the effect owing to the toughness of interface, which results in the aging and treeing proceeding was observed. The polyethylen, as is generally using for the cable, was taken in this research.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.174-175
• /
• 2006

In this paper, AC dielectric strength of the interface between Epoxy and EPDM (ethylene propylene diene terpolymer) was investigated. Air compress system was used to give pressure to the interface. Specimens were prepared in various ways to generate different surface conditions for each type of interface. Increasing interfacial pressure, decreasing surface roughness and spreading oil over surfaces improve the AC interfacial dielectric strength. Especially, the dielectric strength was saturated at certain interfacial pressure.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.1
• /
• pp.7-12
• /
• 2016

User interface is important of programs collaboration. User interface error have a effect in the whole system. As a result, the system reliability will deteriorate. Therefore, we are need to methodology that user interface type is analyze for a reliable analysis in the domain analysis phase. In this paper, we are propose the methodology that extraction and standard of user interface for reliability improvement of domain analysis.

• Journal of the Korean Ceramic Society
• /
• v.40 no.8
• /
• pp.784-790
• /
• 2003

Present investigation shows the analysis results for ceramic reinforced metal matrix composite under uniaxial transverse tensile loading. The resulting deformation, the projected damage type, and stress-strain behavior were computed depending on microstructure details such as the type of periodic reinforcement array, and the type of interface bonding. A two-dimensional finite element analysis was conducted based on the unit-cell of square, hexagonal, or diagonal periodic away For composite with strong interface bonding, the transverse stress vs. strain curve was generally increased with the increase of the ceramic volume fraction. For the composite with weakly bonded interface, however, the transverse stress vs. strain curve was reduced against the ceramic volume fraction. The decrease was caused by the interface debonding-induced stiffness reduction of the composite. For the composite of weakly bonded interface, the relative reduction rate in the final limit stress for hexagonal array was larger than that for square array. Outcome of the present study was compared favorably with the published literature data.

• Journal of Digital Contents Society
• /
• v.11 no.3
• /
• pp.307-314
• /
• 2010

The demand for cyber education in Korea is constantly increasing and the need for research on online lecture on contents design that increases the learning effect is rising. In this research, the online lecture contents about the technical information type provided by Korea Cyber University was understood and we researched about the most preferred lecture type and the most effective lecture type in learning among the 1,173 students in Korea Cyber University who participated in this online survey. Also, we analyzed if the students' preference for the lecture type depended on their experience on that lecture type and we studied the students' claims postulated on the interface design of the lecture contents. The most preferred lecture type among students was e-Stream+flash and they answered that multi-media type lectures were the most effective lectures in learning. The majority of the students preferred lecture contents that they have experienced before and preferred the menu on the left side of the page in interface design. Not only the completeness, but the applications in design in lecture contents are also an important factor in online lectures. As the demand for cyber education in Korea is increasing, content design that can increase the academic performance should be further researched.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.26 no.12
• /
• pp.858-862
• /
• 2013

The front electrode should be used to make solar cell panel so as to collect electron. The front electrode is used by paste type, printed on the Si-solar cell wafer and sintered at about $800^{\circ}C$. The paste is composed Ag powder and glass frit which make the ohmic contact between Ag electrode and n-type semiconductor layer. From the previous study, the Ag electrodes which used two commercial glass frit of Bi-system were so different on the interface resistance. The main composition of them was Bi-Zn-B-Si-O and few additives added in one of them. In this study, glass frit was made with the ratio of $Bi_2O_3$ and ZnO on the main composition, and then paste using glass frit was prepared respectively. And, also, the paste using the glass frit added oxide additives were prepared. The change of interface resistance was not large with the ratio of $Bi_2O_3$ and ZnO. In the case of G6 glass frit, 78 wt% $Bi_2O_3$ addition, the interface resistance was $190{\Omega}$ and most low. In the glass frit added oxide, the case of Ca increased over 10 times than it of G6 glass frit on the interface resistance. It was thaught that after sintering, Ca added glass frit was not flowed to the interface between Ag electrode and wafer but was in the Ag electrode.