• Proceedings of the KIEE Conference
• /
• 2005.07b
• /
• pp.1041-1043
• /
• 2005

It is expected to reduce stresses to components of high voltage circuit breaker and transferred switching surge from power system by applying controlled switching technique to high voltage system. This technique has already been applied to switch shunt reactor or capacitor bank in advanced countries. In this paper, operating software is installed in developed controlled switching device and HMI(Human-machine Interface) is under developing, In the future, this technique is expected to contribute to S.A(Substation Automation).

• Korean Journal of Materials Research
• /
• v.9 no.6
• /
• pp.595-598
• /
• 1999

Ultra-thin films of amphiphilic Squarylium dye were prepared on the hydrophilic glass substrate by Langumuir-Blodgett(LB) technique. From the measurement of the surface pressure-area($\pi$-A) isotherm at air-water interface, it was found that amphiphilic Squarylium dye can form the stable monolayers. Using the LB technique, the Z-type monolayer assembly can be obtained. The amphiphilic Squarylium dye LB films exhibit λ\ulcorner at 684nm. The absorption is significantly red-shifted from solution of amphiphilic Squarylium dye(637nm in chloroform), suggesting that the Squarylim chromophores form J-aggregate in the LB film.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.15 no.4
• /
• pp.540-548
• /
• 1996

In general residual stress is measured by X-ray diffraction method but in case of bonding residual thermal stress it is inadequate technique to examine the stress singularity. Therefore Two-dimensional elastic boundary element analyses were carried out to investigate the residual thermal stress and stress singularity of bonding interface in Al/Epoxy. This boundary element results were compared with the strain gauge measurements. The effects of different interface models, sub-element and adherend thickness are presented and discussed. On the basis of the obtained results, interface delamination causing by normal stress is expected and stress singularity is observed more intensively increasing with adherend thickness. It is concluded that the bonding strength of Al/Epoxy interface can be estimated correctly by taking into account the stress singularity at the edge of the interface.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.35 no.2
• /
• pp.157-164
• /
• 2007

Launch Interface Ring roles as connection department of satellite and launcher for to deliver all structure loads that occur from the satellite, and one of the most intensive load received parts. Especially COMS, the first Korean developing GEO satellite, needs Launch Interface Ring with Tank Support Beam because of dissymmetry fuel tanks. The purpose of this study is the suitable form decision of Launch Interface Ring at preliminary design of COMS. In this study, launch mass and design constraints are investigated. Moreover, optimization algorithm and simplification technique are used. At the beginning of this study, three types of launch interface ring were presented and finally model 3 was the lightest design for resistance of launch environment. Nevertheless, model 1 can be suggested for application to COMS because of the satellite gravity center control and ease of fabrication.

• Journal of the Korean Society for information Management
• /
• v.26 no.2
• /
• pp.173-194
• /
• 2009

Recently, semantic search techniques which are based on information space as consisting of nonambiguous, non-redundant, formal pieces of ontological knowledge have been developed so that users do exploit large knowledge bases. The purpose of the study is to design more user-friendly and smarter retrieval interface based on ontological analysis, which can provide more precise information by reducing semantic ambiguity or more rich linked information based on well-defined relationships. Therefore, this study, first of all, focuses on ontological analysis on researcher information as selecting descriptive elements, defining classes and properties of descriptive elements, and identifying relationships between the properties and their restriction between relationships. Next, the study designs the prototypical retrieval interface based on ontology-based representation, which supports to semantic searching and browsing regarding researchers as a full-fledged domain. On the proposed retrieval interface, users can search various facts for researcher information such as research outputs or the personal information, or carrier history and browse the social connection of the researchers such as researcher group that is lecturing or researching on the same subject or involving in the same intellectual communication.

• The Journal of the Korea Contents Association
• /
• v.16 no.11
• /
• pp.525-536
• /
• 2016

As obtaining information via the Internet has increased recently, the importance of web-based user interface more than ever is being emphasized. The purpose of this study is to improve the sliding structures of submenu in pull-down menu for improving web user interface. Animation techniques applied to the submenu of the pull-down menus that are being used at many web sites have very monotonous sliding structures. In order to solve these problems, a new sliding algorithm based on enlarging/reducing and moving animation techniques with direction control in pull-down menu is proposed. As a result, the proposed method can not only improve visual effects significantly but be also easily applied to the implementation of the web-based user interface in comparison with the previous pull-down menus. Finally, experiments on application of the proposed sliding algorithm to responsive image slider show that the proposed method can achieve good results. Further studies taking into account performance are needed to implement web-based interactive contents using the proposed method.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.783-787
• /
• 2007

Although data analysis in earlier days had been sufficiently done only by character user interface, users of these days are more used to the graphic user interface and the requirements for the user interface are gradually varying and increasing. In order to meet users' various wants and needs and to develop well-equipped interface, not only software developers but also professional designers who can complement the technique of the developers are needed. But in reality there are many restrictions and difficulties for developers and designers to work together cooperatively. Moreover, developing user interface in use of 3D type of graphics and animation techniques causes the rise of the developing cost. The thesis attempts to design and implement 3D visualization for real-time sensor data collected by the various environmental sensor and measuring devices, by using WPF (Window Presentation Foundation) which can make both developers and designers work together cooperatively and which makes it possible to implement various multimedia functions such as a 2D and 3D type of graphics, animation techniques, and an acoustic effect.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.32 no.4
• /
• pp.401-409
• /
• 2012

Ultrasonic testing are far superior to other nondestructive tests for detecting the disbond interface which occurred in adhesive interface. However, a solid rocket motor consisting of a steel case, rubber insulation, liner, and propellant poses many difficulties for analyzing ultrasonic waves because of the superposition of reflected waves and large differences in acoustic impedance of various materials. Therefore, ultrasonic tests for detecting the disbond interface in solid rocket motor have been applied in very limited areas between the steel case and rubber insulation using an automatic C-scan system. The existing ultrasonic test cannot detect the disbond interface between the liner and propellant of a solid rocket motor because most of the ultrasonic waves are absorbed in the rubber material which has low acoustic impedance. This problem could be overcome by analyzing the resonance frequency from the frequency spectrum using the ultrasonic resonance method. In this paper, a new technique to detect the disbond interface between the liner and propellant using ultrasonic resonance characteristics is discussed in detail.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.6
• /
• pp.19-24
• /
• 2012

In this paper we introduce a commercial interactive whiteboard (IWB) system named ImSensorTouch by ImSensor Inc. Using this interface system, we can control our computer through the interactive whiteboard screen just by touching it with your finger or a pen. The interface interacts with Windows operating system (OS) and is adaptable to changes of surroundings especially temperature, and illumination condition. The proposed system calculates the difference between a reference image and a current image captured by a camera in the optical receptive field. And the position making the difference is used to generate the position on Windows screen. Then, we send a mouse event on the position to Windows OS. We have implemented the system using a critical section(CS) with two threads for the reference frame update process in which an adaptive thresholding technique is periodically exploited to get reliable result. We expect the system is competitive and promises a bright future in the IWB market.

• The Journal of the Korea Contents Association
• /
• v.10 no.12
• /
• pp.10-17
• /
• 2010

In this paper, we design digital D-PHY link chip controling DSI (Display Serial Interface) that meets MIPI (Mobile Industry Processor Interface) standard. The D-PHY supports a high-speed (HS) mode for fast data traffic and a low-power (LP) mode for control transactions. For low power consumption, the unit blocks in digital D-PHY are optionally switched using the clock gating technique. The proposed low power digital D-PHY is simulated and compared with conven tional one about power consumption on each transaction mode. As a result, power consumptions of TX, RX, and total in HS mode decrease 74%, 31%, and 50%, respectively. In LP mode, power reduction rates of TX, RX, and total are 79%, 40%, and 51.5%, separately. We implemented the low power MIPI D-PHY digital chip using $0.13-{\mu}m$ CMOS process under 1.2V supply.