• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.265-275
• /
• 2003

본 연구에서는 매립지에서 사용되고 있는 토목섬유 (지오멤브레인, 지오텍스타일, 토목섬유 점토 차수재) 사이의 동적 접촉 마찰 특성을 평가하기 위해서 진동대 실험을 실시하였다. 동적 하중하에서 진동대와 하부에 토목섬유가 부착된 상자의 가속도, 이들 사이의 상대적 변위를 측정하였으며, 연직응력, 진동 주파수, 건조/수침 상태가 접촉면의 동적 거동 특성에 미치는 영향도 알아보았다. 실험 결과를 통해 동적하중이 감쇠없이 토목섬유 사이를 통과하는 한계 가속도가 존재함을 확인하였으며, 이를 이용하여 토목섬유 사이의 동적 접촉 마찰각을 산정할 수 있었다. 접촉면에서의 상대 변위는 접촉면의 형태와 건조/수침 상태에 따라 다르게 측정되었다. 각 토목섬유 접촉면에 대한 최대 상대변위는 무차원으로 정규화시켜, 가속도와 최대 미끄러짐 사이의 관계식을 구하였다. 이 식을 이용하면 주어진 가속도와 주파수에서, 토목섬유 사이를 따라 발생되는 최대 미끄러짐의 크기를 예측할 수 있다.

• 한국지반환경공학회 논문집
• /
• 제19권12호
• /
• pp.33-39
• /
• 2018

본 연구에서는 토목섬유-점토의 접촉면 압밀 전단거동 평가를 위하여 상재하중 및 해수와 담수를 이용해 토목섬유-점토의 경계면에 대한 중요 특성인자를 규명하였다. 또한 폐기물 매립으로 바다에 매립공간을 확보하고 폐기물 처리 및 향후 토지이용 등 새롭게 필요 공간으로 변모가 가능하다. 토목섬유-점토의 접촉면에 거동특성을 분석한 결과 표준 압밀시험기를 이용하여 분석한 경우 해수보다 담수에서 압밀응력이 크게 증가하는 경향을 보였고, 동적 접촉면 전단 시험기를 이용하여 분석한 경우 해수와 담수 두 개의 조건에서 모두 동일하게 하부모듈에 가까운 와이어게이지일수록 변위값이 증가하고, 담수보다 해수의 조건에서 전단파괴가 급격히 일어나는 경향을 볼 수 있다. 따라서 토목섬유-점토의 접촉면에 작용하는 해수와 담수, 차수시설 설치여부(토목섬유)는 차수 시설 동적설계인자에 반드시 필요한 중요 변수로써 고려하여야 한다.

• Korean Journal of Mathematics
• /
• 제19권2호
• /
• pp.191-203
• /
• 2011

The interface between fluids of different densities is unstable under acceleration by a shock wave. A previous small amplitude linear theory for the compressible Euler equation failed to provide a quantitatively correct prediction for the growth rate of the unstable interface. In this paper, to include dominant nonlinear effects in a large amplitude regime, we present high-order perturbation equations of the Euler equation, and boundary conditions for the contact interface and shock waves.

• 대한음성학회:학술대회논문집
• /
• 대한음성학회 2007년도 한국음성과학회 공동학술대회 발표논문집
• /
• pp.39-40
• /
• 2007

For efficient interaction between human and robots, speech interface is a core problem especially in noisy and reverberant conditions. This paper analyzes main issues of spoken language interface for humanoid robots, such as sound source localization, voice activity detection, and speaker recognition.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 전력전자학술대회 논문집
• /
• pp.123-128
• /
• 1998

This paper describes the evaluation of a force-reflecting interface with ultrasonic motors(USMs). The force-reflecting interface allows a human to feel object within virtual environment. To effectively display the mechanical impedance of the human hand we need a haptic device with specific characteristics, such as low inertia, almost zero friction and very high stiffness. USMs have attracted considerable attention as the actuator satisfied these conditions. USMs combine features such as high driving torque at low rotational speed, high holding torque and fast response therefore we studied two degree of freedom force-reflecting haptic system.

• Earthquakes and Structures
• /
• 제8권6호
• /
• pp.1299-1323
• /
• 2015

A model for reflection and refraction of magneto-thermoelastic SV-waves at the interface of two transversely isotropic and homogeneous solid half spaces under initial stress by applying classical dynamical theory of thermoelasticity is purposed. The reflection and refraction coefficients of SV-waves are obtained with ideal boundary conditions for SV-wave incident on the solid-solid interface. The effects of magnetic field, temperature and initial stress on the amplitude ratios after numerical computations are shown graphically with MATLAB software for the particular model.

• 접착 및 계면
• /
• 제6권1호
• /
• pp.1-6
• /
• 2005

The high accurate simulation of very thin glue layers based on the finite element method is still connected to many problems which result from the necessity to construct a complicated mesh of essentially different sizes of elements. This can lead to a loss of accuracy, unstable calculations and even loss of convergence. However, the implementation of special transmission elements along the glue ling and special edge-elements in the near-edge region would lead to a dramatic decrease of number of finite elements in the mesh and thus, prevent unsatisfactory phenomena in numerical analysis and extensive computation time. The theoretical basis for such special elements is the knowledge about appropriate transmission conditions and the edge effects near the free boundary of the adhesive layer. Therefore, recently proposed so-called non-classical transmission conditions and the behavior near the free edge are investigated in the context of the single-lap tensile-shear test of adhesive technology.

• 한국정밀공학회지
• /
• 제27권1호
• /
• pp.91-98
• /
• 2010

The increasing of power and processing speed and miniaturization of central processor unit (CPU) used in electronics equipment requires better performing thermal management systems. A typical thermal management package consists of thermal interfaces, heat dissipaters, and external cooling systems. There have been a number of experimental techniques and procedures for estimating thermal conductivity of thin, compressible thermal interface material (TIM). The TIM performance is affected by many factors and thus TIM should be evaluated under specified application conditions. In compact packaging of electronic equipment the chip is interfaced with a thin heat spreader. As the package is made thinner, the coupling between heat flow through TIM and that in the heat spreader becomes stronger. Thus, a TIM characterization system for considering the heat spreader effect is proposed and demonstrated in detail in this paper. The TIM test apparatus developed based on ASTM D-5470 standard for thermal interface resistance measurement of high performance TIM, including the precise measurement of changes in in-situ materials thickness. Thermal impedances are measured and compared for different directions of heat dissipation. The measurement of the TIM under the practical conditions can thus be used as the thermal criteria for the TIM selection.

• 한국주조공학회지
• /
• 제38권1호
• /
• pp.16-26
• /
• 2018

In this study, the effects of the pouring temperature, preheating temperature, surface condition and fraction of the wear resistant part on the production of duo-castings were investigated using a high Cr white cast iron with excellent abrasion resistance and a low Cr alloy steel with good toughness. The constituent materials of the duo-castings were designed to have high hardness, fracture toughness and abrasive wear resistance for the replacement of high Mn alloy steels with low abrasive wear resistance. In particular, the amount of abrasive wear of 17% Cr white cast iron was about 1/20 of that of high Mn alloy steel. There was an intermediate area of about 3mm due to local melting at the bonding interface of the duo-castings. These intermediate regions were different from those of the constituent materials in chemical composition and microstructure. This region led to fracture within the wear resistant part rather than at the bonding interface in the bending strength test. The bending fracture strengths were 516-824 MPa, which were equivalent to the bending proof strength of high Mn steel. The effects of various casting conditions on the duo-cast behavior were studied by simple pouring of low Cr alloy steel melt, but the results proved practically impossible to manufacture duo-castings with a sound bonding interface. However, the external heating method was suitable for the production of duo-castings with a sound bonding interface.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 C
• /
• pp.1099-1101
• /
• 1999

PJB(Prefabricated Joint Box) is consisted of three major components ; an epoxy unit, a stress relief cone and a spring unit. The insulation structure of PJB is maintained by the interfacial pressure, and the dielectric performance at the interface depends on the interfacial pressure which is regarded as the most important factor for preventing breakdown failure. This experiment was performed to investigate breakdown voltage characteristic and partial discharge patterns under the controlled pressure conditions at the simulated interface. Finally, this paper presents the optimal pressure conditions at the interface by analyasing the PD patterns.