• The Transactions of the Korea Information Processing Society
• /
• v.3 no.5
• /
• pp.1229-1239
• /
• 1996

The increase of additional information broadcasting of TV demands a graphic overlay processor. This paper is about the design, implementation and testing of a graphic overlay processor called by KBPS decoder ASSP (Applicatio n Specific Standard Product) which is compliance with Korea Broadcast Programming System. KBPS decoder ASSP consists of embedded 8 bit microprocessor Z80, graphic overlay controller, KBPS schedule decoder, memory controller, priority interrupt controller, MIDI controller, infrared raccoon receiver, async scrial communication controller, timer, bus controller, universal parallel input-output port and serial-parallel interface. The 0.8 micron CMOS Sea of Gate is used to implement the ASSP in amount of about 31,500 gates, and it is running at 14.318MHz.

• The Journal of Advanced Prosthodontics
• /
• v.9 no.6
• /
• pp.447-452
• /
• 2017

PURPOSE. To evaluate the sealing performance of Hybrid Coat and its influence on the shear bond strength of five dentin surface cements. MATERIALS AND METHODS. Six premolars were pretreated to expose the dentin surface prior to the application of Hybrid Coat. The microscopic characteristics of the dentinal surfaces were examined with scanning electron microscopy (SEM). Then, 40 premolars were sectioned longitudinally, and 80 semi-sections were divided into a control group (untreated) and a study group (treated by Hybrid Coat). Alloy restoration was bonded to the teeth specimen using five different cements. Shear bond strength was measured by the universal testing machine. The fracture patterns and the adhesive interface were observed using a stereomicroscope. RESULTS. SEM revealed that the lumens of dentinal tubules were completely occluded by Hybrid Coat. The Hybrid Coat significantly improved the shear bond strength of resin-modified glass ionomer cement (RMGIC) and resin cement (RC) but weakened the performance of zinc phosphate cement (ZPC), zinc polycarboxylate cement (ZPCC) and glass ionomer cement (GIC). CONCLUSION. Hybrid Coat is an effective dentinal tubule sealant, and therefore its combined use with resin or resin-modified glass ionomer cements can be applied for the prostheses attachment purpose.

• Transactions of the Korean Society for Noise and Vibration Engineering
• /
• v.18 no.5
• /
• pp.485-495
• /
• 2008

An experimental real-time hybrid method, which implements the vibration control of a building structure with only a two-way TLMD, is proposed and verified through a shaking table test. The building structure is divided into the upper experimental TLMD and the lower numerical structural part. The shaking table vibrates the TLMD with the response calculated from the numerical substructure, which is subjected to the excitations of the measured interface control force at its top story and sinusoidal waves input at its base. The results show that the conventional method can be replaced by the proposed methodology with a simple installation and accuracy for evaluating the control performance of a TLMD.

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.10
• /
• pp.117-122
• /
• 2007

The novel implant system was developed using osseo-integration technology which enable amputee to overcome skin troubles in use of previous socket system and was evaluated in view of biomechanics, radiology, histology, and pathology. The osseo-integrated implants were designed and manufactured using CT image of canine's tibia and were applied to laboratory animals (canines). The follow-up studies were performed for 24 months with 10 canines. In radiology examination, we found that the relative low strain distribution caused medial and posterior bone resorption and then we verified them by biomechanical testing. In histological approach, the complete osseo-integration was observed through the activity of osteoblast cells around bone-implant interface and the radial outer region of bone due to peristeum reaction. Lastly in pathological aspect, the evidence of superficial infection was detected but that of deep infection was not. Therefore it is thought that infection problem will be overcome by immunity of body and good hygiene.

• 한국HCI학회:학술대회논문집
• /
• 2006.02b
• /
• pp.203-208
• /
• 2006

디자인의 여러 프로세스중 중요 행위는 사용자가 바라는 점을 파악하여, 제안하는 행위 중심으로 이루어진다. 사용자의 니즈를 파악하는데 있어, 사용성 평가를 활용하면, 논리적이고, 구체적인 불편요소를 파악하는데 도움을 받을 수 있다. 또한, 디자인 개선안의 효용성을 파악하는데도 디자이너에게 유용한 디자인 개발 프로세스로 자리 잡았다. 사용성 평가를 통해 사용자의 불편요소를 파악하는 방법으로는 크게 두가지 방법이 있는데, 하나는 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법을 들수 있고 다른 하나는 모바일 폰을 활용하는 모습을 직접 촬영하여, 분석하는 방법을 들 수 있다. 데스크 탑 컴퓨터를 활용한 시뮬레이션 기법은 화면의 해상도와 인터렉션 방법이 상이하고, 직접 촬영 방법의 경우, 피 시험자가 카메라를 의식하거나, 분석상에 연구자의 바이어스가 개입할 여지가 많아 각각의 단점이 있다. 본 연구에서는 디자이너가 해결안을 프로토타이핑 하는 방법으로 모바일 폰의 프로세서를 활용한 로그를 남기는 방법으로 사용성 평가를 진행할 수 있는 도구를 만들고 이를 통한 사용성 평가 기법의 방안을 제안하였다. Mobile phone 의 Software User Interface 의 개선안을 검증할 수 있는 툴로 제작된 Interactive Mobile Phone Logger 라는 프로그램을Visual Basic 과 JAVA를 이용하여 개발하였다. 이를 활용하면, 디자이너의 해결안을 자동으로 JAVA Class 파일의 패키지로 생성해주고, 서버를 이용하여 패키지를 전송, JAVA를 지원하는 모바일 폰이면 어떠한 모델이든 실험에 참가할 수 있도록 제작 되어있다. 또한, 실험의 결과 데이터는 종료시 자동으로 실험자의 서버를 통해 분석될 수있도록 제작되었다.

• The korean journal of orthodontics
• /
• v.20 no.2
• /
• pp.283-291
• /
• 1990

The purpose of this study was to measure and compare tensile and shear strength for 4 types of new direct-bonding brackets and same brackets after recycling and to evaluate the change of bracket slot width after recycling. Four types of new direct-bond brackets were bonded to recently extracted human premolar teeth and the tensile and shear strength was measured by Universal Testing Machine. The brackets were recycled by chemical process and the tensile and shear test was repeated. To evaluate the change of the bracket slot width, slot width was measured by the Topcon Universal Measuring Microscope before and after recycling. Following results were obtained: 1. There was no satistically significant difference between the tensile and shear strength of recycled brackets and those of new brackets. 2. In both new and recycled brackets, the tensile and shear strength of perforated base bracket was lower than those of photoetched, foilmesh and contou-lok mesh base brackets. (P<0.01) 3. There was no statistically significant difference in bonding strengths of control group bonded only once and two times. 4. There was no statistically significant difference in the change of the bracket slow width after recycling process. 5. Of the failure, the combination type (58%) in the tensile strength and the tooth adhesive interface (65%) in the shear strength was the most common type.

• Journal of Korea Multimedia Society
• /
• v.4 no.6
• /
• pp.570-578
• /
• 2001

Boundary scan architecture test methodology was introduced to facilitate the testing of complex printed circuit board. The boundary scan architecture has a tremendous potential for real time monitoring of the operational status of a system without interference of normal system operation. In this paper, a new type of embedded controller for real time monitoring of the operational status of a system is proposed and designed by using boundary scan architecture. The proposed real time monitoring embedded controller consists of test access port controller and an embedded controller proposed real time monitoring embedded controller using boundary scan architecture can save the hard-wire resource and can easily interface with boundary scan architecture chip. Experimental results show that the real time monitoring using proposed embedded controller is more effective then the real time monitoring using host computer.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.1
• /
• pp.52-59
• /
• 2014

Operator training simulator, within a training environment designed to understand the principles and behavior of the railway system with respect to operator's entries and predefined scenario, can provide a very strong benefit in facilitating operators' handling undesired operations. This simulator consists of computer system and applications, and the purpose of applications is to generate the power and voltage and analyze the AC substation and DC railway, respectively. This paper describes a novel approach to the new techniques for AC/DC hybrid simulation for the operator training simulator in the railway system. We first propose the structure the database of railway system. Then, topology processing and power flow using a linked-list method based on the proposed database, full or decoupled newton-rapshon methods are presented. Finally, the interface between the analysis for AC substation using a newton-rapshon method and the analysis for DC railway system using a time-interval power flow method is described. We have verified and tested the developed algorithm through the extensive testing for the proposed test system. To demonstrate the validity of the developed algorithm, comparative simulations between the proposed algorithm and PSS/E for the test system were conducted.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.384-386
• /
• 1998

The use of hand gesture provides an attractive alternative to cumbersome interface devices for human-computer interaction(HCI). Many methods hand gesture recognition using visual analysis have been proposed such as syntactical analysis, neural network(NN), Hidden Markov Model(HMM) and so on. In our research, a HMMs is proposed for alphabetical hand gesture recognition. In the preprocessing stage, the proposed approach consists of three different procedures for hand localization, hand tracking and gesture spotting. The hand location procedure detects the candidated regions on the basis of skin-color and motion in an image by using a color histogram matching and time-varying edge difference techniques. The hand tracking algorithm finds the centroid of a moving hand region, connect those centroids, and thus, produces a trajectory. The spotting a feature database, the proposed approach use the mesh feature code for codebook of HMM. In our experiments, 1300 alphabetical and 1300 untrained gestures are used for training and testing, respectively. Those experimental results demonstrate that the proposed approach yields a higher and satisfying recognition rate for the images with different sizes, shapes and skew angles.

• Proceedings of the Korean Information Science Society Conference
• /
• 2006.06a
• /
• pp.226-228
• /
• 2006

In this paper we describe a simulation and development framework for designing mobile 3D graphics architectures. We are developing a simple and flexible simulation and verification environment (SVE) that uses gITrace's ability to intercept and redirect an OpenGL/ES streams. In combination wlth gITrace to trace OpenGL/ES commands, the SVE simulates the behavior of mobile 3D graphics pipeline during playback of traces, and then produces the second geometry trace that can be used as a test vector for the Verilog/HDL RT-level model. By comparing the frame-by-frame results, we can conduct architectural verification. To demonstrate the functionality of the SVE, we show the implementation of the verified mobile 3D architecture on a FPGA board. For this, we also present an application development environment (ADE) includes a mobile graphics API and a device driver interface (DDI). The proposed two software environments, the SVE and the ADE could be used fer developing and testing mobile applications, architectural study and speculative hardware designs.