• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.11 no.7
• /
• pp.502-507
• /
• 1998

The purpose of this study is to investigate the breakdown properties in joint interface of power cables with heat treatment. The specimens have the structure of XLPE/EPDM interface like the joint of distribution power cable. The breakdown characteristics of the SLPE/EPDM joint were studied with crosslinking by=products. AC breakdown voltages were measured with heat treatment time and interfacial materials and crosslinking by-products as testing factors. This study has shown that crosslinking by-product gases play an important role at the insulation properties of cable joints by heating. The dielectric strength shows the lowest values at 4 hours heat treatment. The AC breakdown strength in the untreated sample was increased with heat treatment time.

• Journal of Information Technology Services
• /
• v.6 no.1
• /
• pp.17-30
• /
• 2007

The rapid development of information and communication technologies has resulted in rapid increase in the qualitative and quantitative information that can be accessed by information technology. Furthermore an enormous amount of information is provided in various formats. However, there are a group of people who are not able to even approach to targeted information due to physical or environmental problems. Visually handicapped users constitute a class of these users. In this paper, a method of developing user interface for web-based education service is described for the visually handicapped users to access information more efficiently. First, this paper analyzed the problems of visually handicapped users to access information targeting representative domestic sites that supply education services. And based on the results of the above analyses, Nest, this paper explains the web-based education service interface implementation method according to types of the content to be delivered. Lastly, the validity of this method is provided by testing a web page based on the implementation method according to the types of content.

• Advances in concrete construction
• /
• v.15 no.6
• /
• pp.391-404
• /
• 2023

In this study, the modeling of the transverse connection of fully precast steel-UHPC (Ultra-High-Performance Concrete) lightweight composite bridges were conducted. The transverse connection between precast components plays a critical role in the overall performance and safety of the bridge. To achieve an accurate and reliable simulation of the interface behavior, the cohesive model in ABAQUS was employed, considering both bending-tension and compression-shear behaviors. The parameters of the cohesive model are obtained through interface bending and oblique shear tests on UHPC samples with different surface roughness. By validating the numerical simulation against actual joint tests, the effectiveness and accuracy of the proposed model in capturing the interface behavior of the fully precast steel-UHPC lightweight composite bridge were demonstrated.

• Nano
• /
• v.13 no.12
• /
• pp.1850140.1-1850140.9
• /
• 2018

An electrochemical sensor ($Cu^{2+}$-IIPs/GCE) was developed for detection of $Cu^{2+}$ in water. $Cu^{2+}$-IIPs/GCE was prepared by dispersing $Cu^{2+}$ imprinted polymers ($Cu^{2+}$-IIPs) on a preprocessed glassy carbon electrode. $Cu^{2+}$-IIPs were synthesized on the surface of modified carbon spheres by ion imprinting technology. The electrochemical performance of $Cu^{2+}$-IIPs/GCE was evaluated by differential pulse voltammetry method. The response of $Cu^{2+}$-IIPs/GCE to $Cu^{2+}$ was linear in $1.0{\times}10^{-5}mol/L$ to $1.0{\times}10^{-3}mol/L$. The detection limit was $5.99{\times}10^{-6}mol/L$ (S=N = 3). The current response value of $Cu^{2+}$-IIPs/GCE was 2.14 times that of the nonimprinted electrode. These results suggest that $Cu^{2+}$-IIPs/GCE can detect the concentration of $Cu^{2+}$ in water, providing a new way for heavy metal ions adsorption and testing.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.435-441
• /
• 2014

The V2X cooperative communication system is fusion technology which makes vehicle manuver safer. To evaluate and anticipate effect of these kind of technology, it requires real-car based road construction, implementation of communication devices, hiring inspection specialized personnel. For this reason, many laboratories and universities experience difficulties to test their technology results. Also, the need of implementing reliable testbed for testing vehicle safety applications and V2X communication technology is increasing as V2X device development is being accelerated. In this paper, we implemented a system which synchronizes traffic and network simulators via developing External interface to set simulation based testing environment in order to solve the difficulties.

• 한국HCI학회:학술대회논문집
• /
• 2006.02a
• /
• pp.909-917
• /
• 2006

In the last decade, the research of the usability of mobile phones has been a newly evolving area with few established methodologies and realistic practices that ensure capturing usability in evaluation. Thus, there exists growing demand to explore appropriate evaluation methodologies that evaluate the usability of mobile phones quickly as well as comprehensively. This study aims to develop a task-based usability checklist based on heuristic evaluations in views of mobile phone UI practitioners. A hierarchical structure of UI design elements and usability principles related to mobile phones were developed and then utilized to develop the checklist. In order to demonstrate the practical effectiveness of the proposed checklist, comparative experiments were conducted on the usability checklist and usability testing. Majority of usability problems found by usability testing and additional problems were discovered by the proposed checklist. It is expected that the usability checklist proposed in this study could be used quickly and efficiently by usability practitioners to evaluate the mobile phone UI in the middle of the mobile phone development process.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.11a
• /
• pp.669-673
• /
• 2007

In this study, real-time hybrid test using a shaking table for the control performance evaluation of a U-shaped TLCD controlling the response of earthquake-excited building structure is experimentally implemented. In the test, the building structure is used as a numerical part, on which a U-shaped TLCD adopted as an experimental part was installed to reduceits response. At first, the force that is acting between a TLCD and building structure is measured from the load cell attached on shaking table and is fed-back to the computer to control the motion of shaking table. Then, the shaking table is so driven that the error between the interface acceleration computed from the numerical building structure with the excitations of earthquake and the fed-back interface force and that measured from the shaking table. The control efficiency of the TLCD used in this paper is experimentally confirmed by implementing this process of shaking table experiment on real-time.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.17 no.2
• /
• pp.515-524
• /
• 2013

For the development of reliable software, Software testing is the most important. Recently small changes of the software according to the importance of regression testing is growing. To verify Application of a large number of nodes, Network simulator environment is required. This paper proposed interface module between network framework for sensor network application and co-simulator to unit test sensor network application. To conclude, developer can focus on sensor network application implementation only, so the improved integrated simulator contributes to increase development productivity.

• Journal of KIISE:Information Networking
• /
• v.28 no.3
• /
• pp.297-308
• /
• 2001

In this paper, we design, validate and implement WTP(Wireless Transaction Protocol) using SDT(SDL Design Tool). We do modeling WTP protocol by SDL(Specification and Description Language), design and implement the environment function for the interface between the SDL system and the UDP platform and design APIs(Application Programming Interface). And we do conformance testing for WTP protocol software using ITEX(Interactive TTCN Editor and eXecutor). We write ATS(Abstract Test Suite) by TTCN(Tree and Tabular Combined Notation) and make ETS(Executable Test Suite) by the TTCN compiler supplied by ITEX.

• Journal of Adhesion and Interface
• /
• v.7 no.4
• /
• pp.10-12
• /
• 2006

The successful use of adhesively bonded parts depends on the defect-free bond of the components. Therefore it is necessary to detect relevant faults and defects in an early state of the production. A 100% test should be pursued, but especially at complicated structures the detection of defects is not easy. Possible testing methods, which show a high potential for the NDT of adhesively bonded parts, are thermography based NDT methods. At present mainly two different procedures of active thermography are being used: Pulse and Lock-In Thermography. With pulse thermography the examined material is warmed up with a short energy pulse (light, eddy current or ultrasonic pulse) and the heat response is recorded after a certain time. The result is an infrared image which indicates material defects in different depths. This paper presents a variety of images showing the capability of Lock-In Thermography to image subsurface defects. Several examples of adhesives joints qualify the ultrasonic Lock-In-Thermography for the in-process quality control for adhesive bonded components.