• Computers and Concrete
• /
• 제7권2호
• /
• pp.145-158
• /
• 2010

In this work the implementation of a production-level port of the Microplane constitutive model for concrete into the EPIC code is described. The port follows guidelines outlined in the Material Model Module (MMM) standard used in EPIC to insure a seamless interface with the existing code. Certain features of the model were not implemented using the MMM interface due to compatibility reasons; for example, a separate module was developed to initialize, store and update internal state variables. Objective strain and deformation measures for use in the material model were also implemented into the code. Example calculations were performed and illustrate the veracity of this new implementation.

• 한국컴퓨터정보학회논문지
• /
• 제23권11호
• /
• pp.123-128
• /
• 2018

When the injection molding system molds some plastic products, defective product rate will be increased if plastic materials have some excessive moisture content. Therefore, it is very important to control the dehumidification and drying of plastic material. Since the moisture content of the plastic material may change from time to time depending on the material and the molding process, it is necessary to observe the change in real time and maintain a constant moisture content. To solve these problems, I proposed a smart factory system model for plastic molding in this paper. In addition, I designed the interface module to be installed in the dehumidifying dryer which is the core of this process. In addition to this, performance tests were conducted to check the effectiveness and the results were verified as valid.

• 한국경영과학회지
• /
• 제14권2호
• /
• pp.27-42
• /
• 1989

REA 모델은 EA 모델의 구성요소인 측면을 역할측면, 연산측면, A-PART-OF 측면, IS-A 측면, 속송측면 등의 5개 측면으로 분류한 모델이다. EATPS 는 사용자 인터페이스모듈, 지식생성 모듈, 인스턴스 관리 모듈, 스키마 구조관리 모듈, 무걸성검사 모듈등의 5개 모듈로 구성된 지능적 지식표현 시스템의 REA 모델에 의해 대화식 (interactive) 으로 생성하고 관리한다. 본눈문에서는 EATPS 의 구성과 기능, 지식 정의언어인 EAKDL 의 구조및 대화식 형성, 지식생성 모듈의 구성과 기넝, 클래스 생성 모듈의 기능과 알고리즘, 그리고 상속추론메카니즘을 도입한 생성모듈의 기능 및 알고리즘을 제시하였다.

• Journal of the Optical Society of Korea
• /
• 제15권1호
• /
• pp.44-51
• /
• 2011

In this paper, an easy-to-use measurement device for illumination distribution is developed. The device consists of a sensor array module, a control module, and a PC interface. The sensor array module incorporates CIE 1931 color sensors and the ARM-based 96 MHz microcontroller in the control module for measurement and data processing. The sensor array module contains 64 color sensors arranged in a $16{\times}4$ array. The sensitivity of the sensor array module can be adjusted depending on the illumination level to be measured. The measurement data and control signals are exchanged via USB 2.0 standard. To demonstrate the performance of the device, the illumination distribution is measured for colors of red, green, and blue and is graphically shown. The device can be used for measurement of the illumination distribution, design and adjustment of LED illumination.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.1936-1939
• /
• 2004

This paper proposes streaming layer for personal robot's middleware. Under assumption that robot has open architecture, i.e. consists of modules created by different vendors and intercommunication between these modules is necessary, we have to consider that there are many different network interfaces. To make communication between modules possible it is necessary to develop new type of middleware. Such middleware has to support different platforms, i.e. OS, network interface, hardware, etc. In addition, it is necessary to implement effective interface between network and application in order to manage inter application communications and use network resources more effectively. Streaming layer is such interface that implements necessary functionality together with simplicity and portability. Streaming layer provides high level of abstraction and makes communication between distributed applications transparent as if are located in same module. With possibility of extension by user defined application interfaces it is suitable for distributed environments, i.e. module based architecture including small-embedded systems like as DSP board. To verify the proposed streaming layer structure it is implemented using C and tested.

• 한국멀티미디어학회논문지
• /
• 제14권9호
• /
• pp.1210-1220
• /
• 2011

본 논문에서는 PC 상의 가상환경과 사용자간의 몰입형 상호작용 인터페이스로서 햅틱 마우스 시스템을 제안한다. 제안하는 햅틱 마우스는 진동감각 및 온열감을 제공하여 몰입감을 높인다. 진동 모듈은 편심모터와 솔레노이드 액추에이터로 구성하였으며 온열감 모듈은 작은 필름형태의 온도 센서와 펠티어 효과기반의 열 펌프를 이용하여 구축한다. 본 햅틱 마우스 시스템의 효용성을 보이기 위해 레이싱 게임 어플리케이션을 제작한 후 이를 사용하여 실험을 수행한다. 실험 결과로부터 제안하는 햅틱 마우스가 가상환경에서 몰입감을 증가시키며 가상환경과 사용자간의 효과적인 인터페이스로 사용될 수 있음을 증명한다.

• 대한전기학회논문지:전력기술부문A
• /
• 제53권1호
• /
• pp.7-12
• /
• 2004

The role of protective relay with correct setting value is very important for the reliable operation of power : system. The setting process of a protective relay is difficult and requires hard work of calculations. Therefore, KEPCO as been using PROSET2000, a computer program system, in order to automate the setting process of protective relays in power transmission network since 2000. This system has a database and relay setting modules for each type of realy with coresponding Human and Computer Interaction(HCI). For the setting of a new type of relay, it require a new module, a HCI and a database table corresponding to the new relay. But it's update is not easy in case of new type of relay. This paper discussed the update method introducing a concept of Open Interface. It addressd a method to make a new HCI for new relay in view of object-oriented method using UML(Unified Modeling Language). Using the UML, we updated the PROSET2000. HCI screens for a new relay is generated automatically using the information of the new relay stored in the database. And, the database management module is upgraded to solve problems in manage and maintain the database in view of Open Interface.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2004년도 춘계종합학술대회
• /
• pp.37-40
• /
• 2004

본 논문은 RFID 태그 정보를 무선으로 수신하여 이들 정보를 RS-232, USB, Blue-Tooth 또는 Ethernet 인터페이스들을 걸쳐 PC서버에 전달하는 기능을 수행하는 다기능 RFID Reader Platform을 설계 및 구현을 위한 것이다. 개발하고자 하는 Embedded RFID 리더는 크게 RFID 모듈, ARM 프로세서, RS-232 인터페이스, USB 인터페이스, Ethernet MAC 인터페이스, flue-Tooth 인터페이스 등으로 구성 된다. 태그의 정보는 안테나를 통해 RFID 모듈을 걸쳐 ARM 프로세서에 수신된다. ARM 프로세서는 이들 정보를 유선으로는 RS-232, USB, Ethernet MAC 인터페이스를 통해서, 무선으로는 Blue Tooth 인터페이스를 이용해서 PC서버에 전달하는 기능을 수행한다.

• 시스템엔지니어링학술지
• /
• 제17권1호
• /
• pp.21-34
• /
• 2021

The use of Field-Programmable Gate Arrays (FPGAs) in the development of safety-related Human-Machine Interface (HMI) systems has gained much momentum in nuclear applications. Recently, one of the application areas for the Advanced Power Reactor 1400 (APR1400) is in the development of the advanced Component Interface Module (CIM) of the Engineered Safety Features Actuation System (ESFAS). Using systems engineering approach, we have developed a new FPGA-based advanced CIM software. The first step of our software development process involves the Preliminary Hazard Analysis (PHA) based on the previous CIM design. In this paper, we describe the qualitative approach used in performing the preliminary hazard analysis. The paper presents the methodology for applying a modified Hazard and Operability (HAZOP) procedure for the conduct of PHA which resulted in a qualitative risk-ranking scheme that informed the decisions for the safety criteria in the requirements specification phase. The qualitative approach provided the justification for design changes during the advanced CIM software development process.

• 천문학회보
• /
• 제27권2호
• /
• pp.26-26
• /
• 2002