• Journal of the Semiconductor & Display Technology
• /
• v.16 no.2
• /
• pp.44-48
• /
• 2017

We explain optical and electrical properties of top and bottom-emission structured alternating-current powder electroluminescent devices (ACPELDs) with Ga-doped ZnO(GZO) transparent electrode. The top-emission ACPELDs were layered as the metal electrode/dielectric layer/emission layer/top transparent electrode and the bottom-emission ACPELDs were structured as the bottom transparent electrode/emission layer/dielectric layer/metal electrode. The yellow-emitting ZnS:Mn, Cu phosphor and the barium titanate dielectric layers were layered through the screen printing method. The GZO transparent electrode was deposited by the sputtering, its sheet resistivity is $275{\Omega}/{\Box}$. The transparency at the yellow EL peak was 98 % for GZO. Regardless of EL structures, EL spectra of ACPELDs were exponentially increased with increasing voltages and they were linearly increased with increasing frequencies. It suggests that the EL mechanism was attributed to the impact ionization by charges injected from the interface between emitting phosphor layer and the transparent electrode. The top-emission structure obtained higher EL intensity than the bottom-structure. In addition, charge densities for sinusoidal applied voltages were measured through Sawyer-Tower method.

• Nuclear Engineering and Technology
• /
• v.54 no.4
• /
• pp.1271-1287
• /
• 2022

When abnormal operating conditions occur in nuclear power plants, operators must identify the occurrence cause and implement the necessary mitigation measures. Accordingly, the operator must rapidly and accurately analyze the symptom requirements of more than 200 abnormal scenarios from the trends of many variables to perform diagnostic tasks and implement mitigation actions rapidly. However, the probability of human error increases owing to the characteristics of the diagnostic tasks performed by the operator. Researches regarding diagnostic tasks based on Artificial Intelligence (AI) have been conducted recently to reduce the likelihood of human errors; however, reliability issues due to the black box characteristics of AI have been pointed out. Hence, the application of eXplainable Artificial Intelligence (XAI), which can provide AI diagnostic evidence for operators, is considered. In conclusion, the XAI to solve the reliability problem of AI is included in the AI-based diagnostic algorithm. A reliable intelligent diagnostic assistant based on a merged diagnostic algorithm, in the form of an operator support system, is developed, and includes an interface to efficiently inform operators.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2004.02a
• /
• pp.165-169
• /
• 2004

It was studied on the reductive extraction between the eutectic salt and Bi metal phases. The solutes were zirconium and the rare earth elements, where zirconium was used as the surrogate for the transuranic(TRU) elements. All the experiments were performed in a glove box filled with argon gas. Two types of experimental conditions were used -high and low initial solute concentrations in salt. Li-Bi alloy was used as a reducing agent to reduce the high chemical activity of Li. The reductive extraction characteristics were examined using ICP, XRD and EPMA analysis. Zirconium was successfully separated from the rare earth elements by the reductive extraction method. The LiF-NaF-KF system was favorable among the fluoride salt systems, whereas the LiCl-KCl system was favorable among the chloride salt systems. When the solute concentrations were high, intermetallic compounds were found near the salt-metal interface.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.434-434
• /
• 2012

Despite recent efforts for fabricating flexible transparent conducting films (TCFs) with low resistance and high transmittance, several obstacles to meet the requirement of flexible displays still remain. Indium tin oxide (ITO) thin films, which have been traditionally used as the TCFs, have a serious obstacle in TCFs applications. SWNTs are the most appropriate materials for conductive films for displays due to their excellent high mechanical strength and electrical conductivity. Recently, it has been demonstrated that acid treatment is an efficient method for surfactant removal. However, the treatment has been reported to destroy most SWNT. In this work, the fabrication by the spraying process of transparent SWNT films and reduction of its sheet resistance by Au-ionic doping treatment on PET substrates is researched. Arc-discharge SWNTs were dispersed in deionized water by adding sodium dodecyl sulfate (SDS) as surfactant and sonicated, followed by the centrifugation. The dispersed SWNT was spray-coated on PET substrate and dried on a hotplate. When the spray process was terminated, the TCF was immersed into deionized water to remove the surfactant and then it was dried on hotplate. The TCF film was then was doped with Au-ionic doping treatment, rinsed with deionized water and dried. The surface morphology of TCF was characterized by field emission scanning electron microscopy. The sheet resistance and optical transmission properties of the TCF were measured with a four-point probe method and a UV-visible spectrometry, respectively. This was confirmed and discussed on the XPS and UPS studies. We show that 87 ${\Omega}/{\Box}$ sheet resistances with 81% transmittance at the wavelength of 550 nm. The changes in electrical and optical conductivity of SWNT film before and after Au-ionic doping treatments were discussed. The effects of hole transport interface layer using Au-ionic doping SWNT on the performance of organic solar cells were investigated.

• Journal of Korea Multimedia Society
• /
• v.14 no.2
• /
• pp.153-170
• /
• 2011

OMTP (Open Mobile Terminal Platform) is a global forum made by telecommunications providers to promote user-oriented mobile services and data business. Devised by OMTP, BONDI is a browser-based application or a mobile web run-time platform to help widgets make good use of functions of mobile devices in a secure way. BONDI enables applications programmed with web standard technologies such as HTML, JavaScript, CSS, and AJAX to reach the internal functions of mobile devices. Since BONDI, which is not just a simple network application, can reach the internal resources of devices in standard ways, it enables the application and widgets to be developed regardless of tile OS or platform. Web browser-based widgets are vulnerable to the network environment, and their exeeution speed can be slowed as the operations of the widgets or applications become heavy. However, those web widgets will be continuously used thanks to the user-friendly simple interface and the faster speed in using web resources more than the native widgets inside the device. This study suggested a method to effectively operate and manage the resource of OMTP BONDI web widget and then provided an improved result based on a running performance evaluation experiment. The experiment was carried to improve the entire operating time by enhancing the module-loading speed. In this regard, only indispensable modules were allowed to be loaded while the BONDI widget was underway. For the purpose, the widget resource list, able to make the operating speed of the BONDI widget faster, was redefined while a widget cache was employed. In addition, the widget box, a management tool for removed widgets, was devised to store temporarily idle widgets.

• Proceedings of the Korea Multimedia Society Conference
• /
• 1998.10a
• /
• pp.149-154
• /
• 1998

본 논문에서는 월드와이드웹상에서 3차원 인터페이스를 기술하는 표준 사양인 VRML과 자바의 EAI(External Authoring Interface)를 통하여 사용자 간에 발생하는 상호작용들을 동기화 시키는 방법을 소개한다. 제시한 방법에서는 별도의 독립적인 응용프로그램을 작성하거나 동기화를 위하여 확장된 VRML을 사용할 필요없이 웹브라우저와 바로 호환하여 사용할 수 있으며 기존의 방대한 웹문서와 연계가 쉬우므로 범용적인 자료구축이 가능하다. 하지만, 가장 최근의 VRML97에서조차도 VRML이 제시하는 가상공간 다중 사용자 환경의 지원은 아직 미비하다. 더 이상 단순히 3차원 월드를 탐험하는 시기는 지났으며, 같은 공간상에서 혼자가 아닌 여럿이 함께 하는 다중 사용자 환경을 제공해야 할 것이다. 이에 자바의 네트웍 기능과 가상공간의 외부에서 동적으로 월드를 제어할 수 있는 EAI를 이용하여 부족했던 다중 사용자 환경을 지원함으로써 가상 공간 시스템을 구축할 수 있다. 그러나, 가상 공간에서 일어나는 이벤트는 단지 동일 브라우저에서만 유효하기 때문에 다른 사용자에게 전달할 때는 이벤트를 원격지의 이벤트와 연동하기 위하여 다른 방법이 필요하다. 사용자 상호작용 시스템에 있어서 이러한 이벤트를 결정하는 가장 중요한 요소는 아바타의 행동양식(avatar's behavior)이라 할 수 있다. 가상 공간에서 일어나는 이벤트의 대부분이 사용자에 의해서 발생되는 것들이다. 즉, 아바타의 행위에 따라서 사용자 서로 간에 상호작용이 일어나게 되며 이들 이벤트를 서로 동기화 함으로써 실시간 3차원 상호작용 시스템을 구현한다. 이렇게 구현된 시스템을 구현한다. 이렇게 구현된 시스템은 전자 상거래, 가상 쇼핑몰, 가상 전시화, 또는 3차원 게임이나 가상교육 시스템과 같은 웹기반 응용프로그램에 사용될 수 있다.물을 보존·관리하는 것이 필요하다. 이는 도서관의 기능만으로는 감당하기 어렵기 때문에 대학정보화의 센터로서의 도서관과 공공기록물 전문 담당자로서의 대학아카이브즈가 함께 하여 대학의 공식적인 직무 관련 업무를 원활하게 지원하고, 그럼으로써 양 기관의 위상을 높이는 상승효과를 낼 수 있다.하여는, 인쇄된 일차적 정보자료의 검색방법등을 개선하고, 나아가서는 법령과 판례정보를 위한 효율적인 시스템을 구축하며, 뿐만 아니라 이용자의 요구에 충분히 대처할 수 잇는 도서관으로 변화되는 것이다. 이와 함께 가장 중요한 것은 법과대학과 사법연수원에서 법학 연구방법에 관한 강좌를 개설하여 각종 법률정보원의 활용 내지 도서관 이용방법에 관하여 교육하는 것이다.글을 연구하고, 그 결과에 의존하여서 우리의 실제의 생활에 사용하는 $\boxDr$한국어사전$\boxUl$등을 만드는 과정에서, 어떤 의미에서 실험되었다고 말할 수가 있는 언어과학의 연구의 결과에 의존하여서 수행되는 철학적인 작업이다. 여기에서는 하나의 철학적인 연구의 시작으로 받아들여지는 이 의미분석의 문제를 반성하여 본다. 것이 필요하다고 사료된다.크기에 의존하며, 또한 이러한 영향은 $(Ti_{1-x}AI_{x})N$ 피막에 존재하는 AI의 함량이 높고, 초기에 증착된 막의 업자 크기가 작을 수록 클 것으로 여겨진다. 그리고 환경의 의미의 차이에 따라 경관의 미학적 평가가 달라진 것으로 나타났다.corner$적 의도에 의한 경관구성의 일면을 확인할수 있지만 엄밀히 생각하여 보면 이러한 예의 경우도 최락의 총체적인 외형은 마찬가지로 $\ulcorner$순응$\lrcorner$의 범위를 벗어나지 않는다. 그렇기 때문에도 $\ulcorner$순응

• Journal of the Korean Vacuum Society
• /
• v.1 no.1
• /
• pp.67-72
• /
• 1992

The growth of Ti on Si(111)-$7{\times}7$ and the formation of epitaxial C54 $TiSi_2$ were investigated by using reflection high energy electron diffraction(RHEED) and high resolution transmission electron microscopy(HRTEM). Polycrystalline Ti layer is grown on the amorphous Ti-Si interlayer which is formed at the Ti/Si interface by Ti deposition on Si(111)-$7{\times}7$ at room temperature (RT). HRTEM lattice image and transmission electron diffraction(TED) showed that epitaxial C54 $TiSi_2$ grown on Si substrate with 160 ML of Ti on Si(111)-$7{\times}7$ surface at RT, followed by annealing at $750^{\circ}C$ for 10 min in UHV. Thin single crystal Si overlayer with [111] direction is grown on $TiSi_2$ surface when $TiSi_2$/Si(111) is annealed at ${\sim}900^{\circ}C$ in UHV, which was confirmed by Si(111)-$7{\times}7$ superstructure.

• Restorative Dentistry and Endodontics
• /
• v.18 no.2
• /
• pp.291-316
• /
• 1993

Restorative procedures can lead to tooth fracture due to the relatively small amount of the remaining tooth structure. It is essential to prevent fractures by having a clear concept of the designs for cavity preparations. Among the several parameters in cavity designs, profound understanding of isthmus width factor would facilitate selection of the appropriate cavity preparation for a specific clinical situation. In this study, MO amalgam cavity were prepared on maxillary first premolar and filled with amalgam. Three dimensional, model with 1365 8-node brick elements was made by serial photographic method. In this model, isthmus was varied in width at 1/4, 1/3, 1/2 and 2/3 of intercuspal width and material properties were given for three element groups, i.e., enamel, dentin and amalgam. A load of 500 N was applied vertically on amalgam and enamel. In case of enamel loading, 2 model (with and without amalgam) was compared to consider the possibility of play at the interface between tooth material and amalgam. These models were analyzed with three dimensional finite element method. The results were as follows: 1. The stress was concentrated on the facio-pulpal line angle and distal marginal ridge of the cavity. 2. With the increase of the isthmus width, the stress spread around the facio-pulpal line angle and the area of stress concentration moved toward the proximal box. 3. In case of narrow isthmus width, the initiation point of crack would be in the area of isthmus corner of the cavity, and with the increase of the isthmus width, it would move toward the proximal box and at the same time the possibility of crack increase at the distal marginal ridge. 4. The direction of crack progressed outward and downward from the facio-pulpal line angle, and with the increase of the isthmus width, it approximated vertical direction. At the marginal ridge, it occurred in vertical direction. 5. It would be favorable to make the isthmus width narrower than a third of the intercuspal width, and to cover the cusp if isthmus width were wider than half of the intercuspal width. 6. It is necessary to apply the possibility of play to the finite element analysis.

• Journal of Internet Computing and Services
• /
• v.9 no.1
• /
• pp.115-127
• /
• 2008

The component for satisfying several domain requirements must be developed to support variety. But, when the application is developed using the component, it happens other requirements. So, it is difficult to design component to satisfy severaldomain requirements. Also, it is impossible to support the special business logic. As this problem, the component must provide to the white-box component, it is not the black-box component. So, in this paper, we propose the variability design technique and the customization technique using the design technique that can support the various requirements. This technique is not focus on designing the component to analyze various domains. The variability of the component is designed to the initial variability in the component development phase and we use the customization technique for applying the variability to developing application. The variability can be re-designed during developing the application to use the component applying the variability. The variability of the component is evolved and the generation of the component is increased via the iteration Generally, the range of the component variability is classified the function modification within the component and the component internal structure modification as requirements in the component outside. As the range of the variability, we propose the variability design technique of the behavior and the message flow. This paper proposes a message flow design technique for modifying function call.

• The KIPS Transactions:PartD
• /
• v.11D no.2
• /
• pp.443-452
• /
• 2004

The paper presents an intelligent space management system for ubiquitous computing. The system is basically a home/office automation system that could control light, electronic key, and home appliances such as TV and audio. On top of these basic capabilities, there are four elegant features in the system. First, we can access the system using either a cellular Phone or using a browser on the PC connected to the Internet, so that we control the system at any time and any place. Second, to provide more human-oriented interface, we integrate voice recognition functionalities into the system. Third, the system supports not only reactive services but also proactive services, based on the regularities of user behavior. Finally, by exploiting embedded technologies, the system could be run on the hardware that has less-processing power and storage. We have implemented the system on the embedded board consisting of StrongARM CPU with 205MHz, 32MB SDRAM, 16MB NOR-type flash memory, and Relay box. Under these hardware platforms, software components such as embedded Linux, HTK voice recognition tools, GoAhead Web Server, and GPIO driver are cooperated to support user-friendly intelligent space.