• Genomics & Informatics
• /
• v.14 no.4
• /
• pp.187-195
• /
• 2016

In genetic association studies with high-dimensional genomic data, multiple group testing procedures are often required in order to identify disease/trait-related genes or genetic regions, where multiple genetic sites or variants are located within the same gene or genetic region. However, statistical testing procedures based on an individual test suffer from multiple testing issues such as the control of family-wise error rate and dependent tests. Moreover, detecting only a few of genes associated with a phenotype outcome among tens of thousands of genes is of main interest in genetic association studies. In this reason regularization procedures, where a phenotype outcome regresses on all genomic markers and then regression coefficients are estimated based on a penalized likelihood, have been considered as a good alternative approach to analysis of high-dimensional genomic data. But, selection performance of regularization procedures has been rarely compared with that of statistical group testing procedures. In this article, we performed extensive simulation studies where commonly used group testing procedures such as principal component analysis, Hotelling's $T^2$ test, and permutation test are compared with group lasso (least absolute selection and shrinkage operator) in terms of true positive selection. Also, we applied all methods considered in simulation studies to identify genes associated with ovarian cancer from over 20,000 genetic sites generated from Illumina Infinium HumanMethylation27K Beadchip. We found a big discrepancy of selected genes between multiple group testing procedures and group lasso.

• Journal of the Society of Naval Architects of Korea
• /
• v.50 no.3
• /
• pp.129-137
• /
• 2013

Each owner or operator of offshore products uses a maintenance management system like CMMS(Computerized Maintenance Management System) in order to manage their assets effectively and efficiently for a long time. But most of maintenance management systems have been focused on machinery items, not on 'Hull' until now. On the other hand, classifications like ABS, DNV, GL are having a sale on hull inspection and maintenance system for ships and an interest in hull maintenance system is increasing because of the application of EDD(Extended Dry Docking). This paper discusses the concept, inspection process and the practical application of Hull maintenance for Semi-submersible drilling rig to extend the service life and run a stable operation.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.10
• /
• pp.109-119
• /
• 2017

In recent through development of IOT owing to that mass stream data is being generated in variety of application complex event processing technology is being watched with keen interest as a technology to analyze this kind of real-time continuous data. However, the existing study related with complex event processing only comes to an end at simple event processing based on low-level event or comes to an end at service defect discovery with providing limited operator and so on. Accordingly, there would be limitation to provide useful analysis information. In this paper in consideration of complex event along with aspect-oriented programming an extended complex event model is provided, which is possible to provide more valuable and useful information. Specifically, we extend the model to support hierarchical event structures and let the model recognize point-cuts of aspect-oriented programming as events. We provide the event operators designed to specify the events on instances and handle temporal relations of the instances. It is presented that syntax and semantics of constructs in our event processing language including various and progressive event operators, complex event pattern, etc. In addition, an event context mechanism is proposed to analyze more delicate events. Finally, through application studies application possibility of this study would be shown and merits of this event model would be present through comparison with other event model.

• Nuclear Engineering and Technology
• /
• v.54 no.8
• /
• pp.2915-2923
• /
• 2022

There is an increasing interest in passive safety systems to minimize the need for operator intervention or external power sources in nuclear power plants. Because a passive system has a weak driving force, there is greater uncertainty in the performance compared with an active system. In previous studies, several methods have been suggested to evaluate passive system reliability, and many of them estimated the failure probability using thermal-hydraulic analyses and the Monte Carlo method. However, if the functional failure of a passive system is rare, it is difficult to estimate the failure probability using conventional methods owing to their high computational time. In this paper, a procedure for the application of the Chernoff bound to the evaluation of passive system reliability is proposed. A feasibility study of the procedure was conducted on a passive decay heat removal system of a micro modular reactor in its conceptual design phase, and it was demonstrated that the passive system reliability can be evaluated without performing a large number of thermal-hydraulic analyses or Monte Carlo simulations when the system has a small failure probability. Accordingly, the advantages and constraints of applying the Chernoff bound for passive system reliability evaluation are discussed in this paper.

• Journal of Radiation Industry
• /
• v.17 no.3
• /
• pp.233-238
• /
• 2023

This study was conducted to confirm the safety of the operator's radiation exposure in the micro PET-CT image acquisition experiment using the ¹⁸F-FDG. The usage of ¹⁸F-FDG and the exposure dose of handlers were measured at University B in Metropolitan City A, which uses ¹⁸F-FDG for micro PET-CT image acquisition. As a result of the measurement, the exposure dose is far below the effective dose limit of radiation workers, 50 mSv per year, and the equivalent dose limit of 500 mSv per year for hands, feet, and skin. has been measured Since these exposure doses can be further increased according to the number of times of use of ¹⁸F-FDG, it is judged that the exposure dose compared to the handling amount of ¹⁸F-FDG shown in this study can be used as reference data. In addition, as changed environments such as the use of materials other than unopened RI are occurring in education and research environments, such as the use of ¹⁸F-FDG at University B, radiation exposure with more interest in safety management by checking the factors of radiation exposure of the handler concerned We will always do our best to reduce it.

• The KIPS Transactions:PartD
• /
• v.10D no.7
• /
• pp.1171-1176
• /
• 2003

In this paper, we propose an effective bar code detection algorithm using the feature analysis and the labeling. After computing the direction of pixels using four line operators, we obtain the histogram about the direction of pixels by a block unit. We calculate the difference between the maximum value and the minimum value of the histogram and consider the block that have the largest difference value as the block of the bar code region. We get the line passing by the bar code region with the selected block but detect blocks of interest to get the more accurate line. The largest difference value is used to decide the threshold value to obtain the binary image. After obtaining a binary image, we do the labeling about the binary image. Therefore, we find blocks of interest in the bar code region. We calculate the gradient and the center of the bar code with blocks of interest, and then get the line passing by the bar code and detect the bar code. As we obtain the gray level of the line passing by the bar code, we grasp the information of the bar code.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.320-323
• /
• 2014

Today is going with the advancement of intelligent transportation systems and traffic environment and helping to provide safe and convenient service through a mobile device work with the popularization of the vehicle black box. The traffic flow by a variety of causes is constantly changing, it is often unable to prepare the driver, depending on external factors can not be controlled by the power of the public, leading to a major accident. The system needs to pass the real-time weather data in the inter-operator to prevent this. The proposed detection algorithm weather information delivered real-time weather information for this paper. The weather condition is detected by using the contrast between the histogram of the motion of the wiper and the clear day algorithm. In general, the wiper is worked in extreme weather conditions that will have a value different contrast due to rain or snow. Situation was considered clear, snowy conditions, such as using it on a rainy situation. First, designated as ROI (Region Of Interest) of the minimum area that can be detected in order to reduce the amount of calculation for the wiper, the wiper, which was detected through the operation of the threshold Thresholding the brightness of the vehicle wiper. In addition, we distinguish the value of each meteorological situation by using contrast. Results was obtained to 80% for the snow conditions, a rainy situation.

• Journal of Korean Home Economics Education Association
• /
• v.29 no.2
• /
• pp.1-22
• /
• 2017

The purpose of this research is to share the experience of reflective practice of a Home Economics teacher professional learning community(PLC) operator and to share better suggestions through reflection on PLC operation. All conversation in the 18 sessions of the PLC totally from May 31st 2013 to May 19th 2014 was recorded and transcribed. All materials of PLC activity were qualitatively analysed. Its themes were grounded on its coding and categorization scheme. Findings and conclusions of this study are as followings. The experience of learning the PLC for a year has found that it is the power to keep the PLC alive: courage and anxiety to face anxiety and anxiety about new challenges, the importance of theme selection, a teacher with a reckless challenge, shares of becoming a leader. Through reflection, I learned that concerns require attention to other teachers and the need for a 'New Round' for ongoing meetings. I, as a operator, did not fully consider participant's different interest as well as a program for a new round due to the lack of management experience. It led to the low participations in latter sessions of PLC. Suggestions are put as solutions to improve these problems; (1) grouping participants by school levels when collecting participants, (2) setting operation period and program applying participants' opinions, and (3) operating short-term PLC with certain themes to immerse reaching goal and satisfaction in short time.

• The Korean Journal of Air & Space Law and Policy
• /
• v.31 no.1
• /
• pp.37-62
• /
• 2016

Two controversial issues exist in interpretation of "Force Majeure" set forth in the Article 931 (4) of the Korean Commercial Code. Firstly, its scope of application is ambiguous. Secondly, there is a concern that the "immunity" under paragraph 1 and "Force Majeure" may overlap each other. "Force Majeure" refers an event resulted from either natural disaster or 3rd-party. Meanwhile, the latter implies relatively extensive and comprehensive meaning and its interpretation may vary depends on law enforcement. In general, the aircraft accident hardly results in damage or loss to the 3rd-party. Additionally, it is worth to review newly enacted clause and to define its applicability. When the 3rd party is suffered from damage or loss incurred by any external act, it is necessary to explicit the concept of the non-contractual liabilities with respect to 3rd party. From the perspective of protecting aviation industries, the commercial aviation operator may be entitled to immunity in respect of claim for damage incurred by the event of Force Majeure. However, this approach is directly opposite to the victim's benefit and protection by the law. Therefore, the priority of the legal protection should be considered. Although the interest of the commercial aviation operator is not negligible, the protection of the law should be favorable to the 3rd party. Otherwise, the innocent party has no right to claim for damage incurred by aviation accident. Another issue is about the possibility of overlapping of the provision set forth in the paragraph 1 and 4. The former states that the liabilities shall be exempted on account of either the unsettled political or economic situation but this clause is inconsistent with the interpretation on Force Majeure under the latter. As argued above, this may include any event resulted from either political or economic account by the external influence of the 3rd party, thus these two provisions are overlapped. Consequently, in order to develop ordinances and guidelines and to ensure an equal protection to both parties, above two issues must remain open for further discussions.

• 전기의세계
• /
• v.2
• /
• pp.6-14
• /
• 1949

Telemetering may be described as the art of metering at a considerable distance those quantities which are ordinarily encountered in industry, and in the generation of electric power. It is in the production of electric power that telemetering is particularly important, for it permits the system operator, or load dispatcher, to have before him at all times a continuous graphic record of the power output of each individual generating station together with an automatically made continuous graphic record of the total system output. There desired individual graphic records may be obtained showing power flow in or out, on important tie lines, etc. Such arrangements have the very great advantage that loads may be assigned to each generating station so that the best over-all system economy may be obtained and the system operator at all times may see with his own eyes that loads scheduled are actually held at the various stations. Moreover, with such equipment, in the event of system or station trouble the load dispatcher can see exactly what station, or stations, are affected and to what extent, without having to get in touch with anyone by telephone. Decisions can, therefore, be quickly reached for rescheduling the load. One of the most accurate and reliable telemetering systems is based on the use of potentiometric circuits, the fundamentals of which are discussed below. A member of such telemetering systems have been installed for the Boston Edicon Co., Boston, Massachusetts, the Consolidated Edison Co. of New York City. The Public Service Gas & Electric Co. of Newark, new Jersey. The Philadelphia Electric Co. for Philadelphia, Pennsylvania, and the Pennsylvania Railroad Co. for their electrified zone between New York and Washington a distance of over 200 miles. The scale of the totalizing recorder for the New York area is 3,000,00 KW. That of the totalizing recorder for the Philadelphia area is 2,000,000 KW. The initial installation using this type of equipment described was placed in service for the Philadelphia Electric Co. in 1923. All of the original recording instruments are still in service, later instruments have been added to take care of additions to the power system and naturally these later recorders have incorporated in those refinements in design made since the earlier ones were manufactured. Many other installations of similar equipment have been made in the United States in various locations such as at St. Louis, on the West Coast, at Baltimore and in Washington, D.C. While the use of these basic potentiometric circuits involves the use of continuous metallic circuits of good insulation resistance and free of grounds, nevertheless, intermediate transmission links, involving and impulse method suitable for use on telephone Morse carrier channels is available. This same method may be employed on power line carrier systems and is also suitable for use on beam type microwave transmission. Many impulse type units are also used as a link in these potantiometric methods. For the sake of brevity a description is given only of these basic potentiometric circuits. If there is sufficient interest in Korea, a further paper can be given covering those impulse circuits also.