• Journal of The Korean Society of Agricultural Engineers
• /
• v.59 no.6
• /
• pp.81-87
• /
• 2017

The total area of domestic reclaimed lands is 54,379 ha, and among these, 30,394 ha can be agriculturally available. To increase an agricultural availability of reclaimed land, controlled horticultural products that can be highly profitable have come to the fore. However, as being characteristically concerning, when original glasshouse is intactly applied in reclaimed land, it is unsafe on account of ground subsidence and, even if ground were reinforced, it has a problem by high cost. So a new greenhouse model would be necessary taking into account not only cost-efficiency but also safety with relatively light-weight one. Before this, this paper estimated acceptance rate of controlled horticultural complexes in reclaimed land and new greenhouse model for 414 farmers. The annual rental fee is 129,712,500 won/ha, considering the interest rate (2.5 %) of the investment, the depreciation cost of the facilities (straight line depreciation method, 20 years of service life estimated), and government subsidy rate (50 %) which resulted in a sufficient number of intended tenants with the acceptance rate of 0.33. The results of this paper may contribute to the government's policies for reclaimed land.

• Current Photovoltaic Research
• /
• v.6 no.1
• /
• pp.21-26
• /
• 2018

Beside several advantages, the PV power generation as a clean energy source, is still below the supply level due to high power generation cost. Therefore, the interest in fabricating low-cost thin film solar cells is increasing continuously. $Cu_2O$, a low cost photovoltaic material, has a wide direct band gap of ~2.1 eV has along with the high theoretical energy conversion efficiency of about 20%. On the other hand, it has other benefits such as earth-abundance, low cost, non-toxic, high carrier mobility ($100cm^2/Vs$). In spite of these various advantages, the efficiency of $Cu_2O$ based solar cells is still significantly lower than the theoretical limit as reported in several literatures. One of the reasons behind the low efficiency of $Cu_2O$ solar cells can be the formation of CuO layer due to atmospheric surface oxidation of $Cu_2O$ absorber layer. In this work, atomic layer deposition method was used to remove the CuO layer that formed on $Cu_2O$ surface. First, $Cu_2O$ absorber layer was deposited by electrodeposition. On top of it buffer (ZnO) and TCO (AZO) layers were deposited by atomic layer deposition and rf-magnetron sputtering respectively. We fabricated the cells with a change in the deposition temperature of buffer layer ranging between $80^{\circ}C$ to $140^{\circ}C$. Finally, we compared the performance of fabricated solar cells, and studied the influence of buffer layer deposition temperature on $Cu_2O$ based solar cells by J-V and XPS measurements.

• Structural Engineering and Mechanics
• /
• v.82 no.5
• /
• pp.557-569
• /
• 2022

The retrofit of existing structures in high seismic zones is a crucial issue in the earthquake engineering field. The interest of the research community is particularly high for the structures that do not respect current seismic codes and present structural deficiencies such as poor detailing and lack of capacity design provisions. A reinforced concrete (RC) school building is used as case study to show the influence of different knowledge levels on the seismic retrofitting cost assessment. The safety assessment of the case study building highlights deficiencies under both vertical and seismic loads. By considering all the possible knowledge levels defined by the Italian such as by the European codes in order to derive the mechanical properties of the school building constitutive materials, the retrofit operations are designed to achieve different seismic safety thresholds. The retrofit structural costs are calculated and summed up to the costs for in-situ in tests. The paper shows how for the case study building the major costs spent for a large number of in-situ tests allows to save a consistent amount of money for retrofit operations. The hypothesis of demolition and reconstruction of the building is also compared in terms of costs with all the analyzed retrofit options.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.3
• /
• pp.439-445
• /
• 2021

Low-cost, ultra-high-speed cameras, made possible by the development of image sensors and small displays, can be very useful in image processing and pattern recognition. This paper introduces an algorithm that corrects irregular lighting from a high-speed image that is continuously input with a slight time interval, and which then obtains an exposed skin color region that is the area of interest in a person from the corrected image. In this study, the non-uniform lighting effect from a received high-speed image is first corrected using a frame blending technique. Then, the region of interest is robustly obtained from the input high-speed color image by applying an elliptical skin color distribution model generated from iterative learning in advance. Experimental results show that the approach presented in this paper corrects illumination in various types of color images, and then accurately acquires the region of interest. The algorithm proposed in this study is expected to be useful in various types of practical applications related to image recognition, such as face recognition and tracking, lighting correction, and video indexing and retrieval.

• The Journal of Korean Academy of Prosthodontics
• /
• v.59 no.2
• /
• pp.164-172
• /
• 2021

Purpose: The purpose of this study was to analyze the level of interest that common Internet users have in dental implant using a Google Trends, and to compare the level of interest with big data from National Health Insurance Service. Materials and methods: Google Trends provides a relative search volume for search keywords, which is the average data that visualizes the frequency of searches for those keywords over a specific period of time. Implant was selected as the search keyword to evaluate changes in time flows of general Internet users' interest from 2015 to 2019 with trend line and 6 month moving average. Relative search volume for implant was analyzed with the number of patients who received National Health Insurance coverage for implant. Interest in implant and conventional denture was compared and popular related search keywords were analyzed. Results: Relative search volume for implant has increased gradually and showed a significant positive correlation with the total number of patients (P<.01). Interest in implant was higher than denture for most of the time. Keywords related to implant cost were most frequently observed in all years and related search on implant procedure was increasing. Conclusion: Within the limitations of this study, the public interest in dental implant was gradually increasing and specific areas of interest were changing. Web-based Google Trends data was also compared with traditional data and significant correlation was confirmed.

• Journal of Korean Society for Quality Management
• /
• v.35 no.2
• /
• pp.37-44
• /
• 2007

Today, the statistical process control (SPC) in manufacture environment is an important role at the process by the productivity improvement of the manufacturing systems. The control chart in this statistical method is widely used as an important statistical tool to find the assignable cause that provoke the change of the process parameters such as the mean of interest or standard deviation. But the traditional SPC don't grasp the change of process according to the points fallen the near control limits because of monitoring the variance of process such as the fixed sampling interval and the sample size and handle the cost of the aspect of these sample point. The control chart can be divided into the statistical and economic design. Generally, the economic design considers the cost that maintains the quality level of process. But it is necessary to consider the cost of the process improvement by the learning effects. This study does the economic design in the VSI $\bar X$ control chart and added the concept of loss function of Taguchi in the cost model. Also, we preyed that the VSI $\bar X$ control chart is better than the FSI $\bar X$ in terms of the economic aspects and proposed the standard of the process improvement using the VSI $\bar X$ control chart.

• Health Policy and Management
• /
• v.14 no.3
• /
• pp.1-19
• /
• 2004

The purposes of this study were to investigate factors of the Obstetrics & Gynecology healthcare consumers' selection of hospitals by lifestyle segmentation and to propose managerial suggestions in health care marketing. Out of total 400 Questionnaires, 351 were considered to be valid for final analysis. The Questionnaire consisted of 81 Questions. 11 demographic Questions, 15 factors for selecting hospitals, 55 lifestyle. The collected data were analyzed with SPSS/pc+ Version 10.0. The subjects were divided into four groups in terms of their lifestyles: 'health active group', 'health conscious group', 'health indifferent group', 'health inactive group'. The analysis of factors related to the selection of hospitals shows that there were four factors: 'accessability', 'medical trust', 'cost and convenience', 'facilities'. Conclusion: As a results of this study, 4 types of healthcare consumers' lifestyle were defined. Each life style has specific characteristics. 'Health active group' pursue 'accessability', 'medical trust', 'cost and convenience' and Health conscious group' depended on 'medical trust', 'cost and convenience'. and 'facilities'. 'Health indifferent group' didn't show any special interest in the selection of hospitals and that 'Health inactive group' relied on 'medical trust', and 'facilities'.

• Proceedings of the Korean Institute of Interior Design Conference
• /
• 2007.11a
• /
• pp.30-36
• /
• 2007

Recently, many performing arts facilities are under construction to accommodate people's various interest in cultural experiences. However, due to Korea's lack of know-how in such constructions and an absence of proper regulations on design planning, each designer designs and constructs the facilities differently, so several problems are occurring in the process of construction, such as high production cost for stage sets, high labor cost, low efficiency of stage work, and complicated work process. This resulted in low quality production of performance. This study is conducted to address the need for a systematic study on stage floor, and to propose an efficient way of regulating stage work in existing performing arts facilitiesand new facilities to be built. By a comparative analysis of performing arts facilities in Korea, and by analyzing stage floors of the facilities, this research suggests minimum modules as well as an appropriate unit of modules based on the minimum modules; and provides basic data on stage floors, which can be used for remodeling existing facilities orfor planning new cultural facilities. Also, this study suggests various ways of utilizing performing arts facilities in Korea.

• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.625-634
• /
• 2007

Energy-saving is one of important issues in multi-family housing projects in South Korea. According to the study by Yu et al. (2002), the balcony conversion causes energy loss approximately one and a half times. Therefore, it is important to select the economical glass type in the balcony window. In order to identify the most economical glass type of balcony conversion in multi-family housing projects, the most typical type of the multifamily housing projects in the metropolitan area was selected as a candidate project. The selected candidate project has been simulated using ENERGY-10 program to estimate the heat load by the different five types of glasses as well as their life cycle cost analysis (LCCA) using present worth method. Finally, sensitivity analysis has been conducted to determine the most economical glass types under a different discount rate (interest rate) and service life of building.

• Journal of the Korea Institute of Building Construction
• /
• v.18 no.6
• /
• pp.621-631
• /
• 2018

The repair and maintenance cost of domestic public rental housing is an issue of considerable interest and growing financial concern. This paper suggests a quantity-based model as an alternative method for predicting costs, instead of the conventional model which is based on actual cost data. Furthermore, this paper provides a forecast of the repair costs incurred each year during the multi family house's maintenance phase (40 years). The recently changed the long-term repair plan and quality-improved interior materials were considered into the research. In order to estimate the cost of maintenance work, 5 sample apartments were selected and analyzed. The repair and maintenance cost from the case studies was converted to cost per household and per floor area for general use. On the other hand, the net present value method was applied to reflect the effect of time. We expect that the results will help to establish expenditure plans that are more effective for public rental housing in the maintenance stage.