• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -3
• /
• pp.1563-1566
• /
• 2002

A 16-bit adiabatic datapath for micro-power RISC processor is designed. The datapath is composed of a 3-read and 1-write multi-port adiabatic register file and an arithmetic and logic unit. A four-phase clock generator is also designed to provide supply clocks fer adiabatic circuits and the driving capability control scheme is proposed. All the clock line charge on the capacitive interconnections is recovered to recycle energy. Adiabatic circuits are designed based on efficient charge recovery logic(ECRL) and are implemented using a 0.35 fm CMOS technology. Functional and energy simulation is carried out to show the feasibility of adiabatic datapath. Simulation results show that the power consumption of the adiabatic datapath including supply clock generator is reduced by a factor of 1.4∼1.5 compared to that of the conventional CMOS.

• 한국전자파학회논문지
• /
• 제11권5호
• /
• pp.822-829
• /
• 2000

본 논문에서는 무선광열에서 잡음광의 영향을 소거하는 동시에, 신호광원의 미세한 정렬변동에 의하여 빔의 진행방향이 이동할 경우 발생하는 출력전압의 변동을 막기 위한 자동정렬형 차동검출기를 개발하여 소개한다. 이 구조에서는 신호빔과 수직한 포토다이오드 배열을 사용하여 빔의 중심위치를 감지하고, x축과 y축에 해당하는 모토를 구동한다. 포토다이오드배열은 자신의 위치가 항상 신호빔의 중심에 오도록 자동적으로 조절하는 동시에 차동검출방식으로 잡음광의 영향을 소거하는 기능을 가지므로 무선광연결에서 매우 유용하게 쓸수 있다.

• 한국전자파학회논문지
• /
• 제9권5호
• /
• pp.660-667
• /
• 1998

본 논문에서는 실내 무선광연결에서 2개의 채널을 구성한 경우에 빔의 중첩으로 인하여 발생하는 흔신의 영향을 줄이기 위하여 차동증폭기를 사용하였다. 또한 동일한 원리를 이용하면 주변광집음이 있는 경우에 잡음을 억제할 수 있음을 실험적으로 확인하였다. 이러한 방법은 별도의 광학적 필터나 전기적 필터를 사용하지 않고 간단히 차동증폭기로 구현되므로 근거리 광연결을 구성하는 경우에 매우 유용하게 사용할 수 있다.

• Carbon letters
• /
• 제13권1호
• /
• pp.51-55
• /
• 2012

In this work, expanded graphite (EG)-reinforced poly(ethylene terephthalate) (PET) nanocomposites were prepared by the melt mixing method and the content of the EG was fixed as 2 wt%. The effect of multi-walled carbon nanotubes (MWCNTs) as a co-carbon filler on the electrical and mechanical properties of the EG/PET was investigated. The results showed that the electrical and mechanical properties of the EG/PET were significantly increased with the addition of MWCNTs, showing an improvement over those of PET prepared with EG alone. This was most likely caused by the interconnections in the MWCNTs between the EG layers in the PET matrix. It was found that the addition of the MWCNTs into EG/PET led to dense conductive networks for easy electron transfers, indicating a bridge effect of the MWCNTs.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제14권1호
• /
• pp.1-7
• /
• 2014

This paper presents a novel method for simultaneously and automatically choosing the nonlinear structures of regressors or discriminant functions, as well as the number of terms to include in a rule-based regression model or pattern classifier. Variables are first partitioned into subsets each of which has a linguistic term (called a causal condition) associated with it; fuzzy sets are used to model the terms. Candidate interconnections (causal combinations) of either a term or its complement are formed, where the connecting word is AND which is modeled using the minimum operation. The data establishes which of the candidate causal combinations survive. A novel theoretical result leads to an exponential speedup in establishing this.

• KIEE International Transactions on Power Engineering
• /
• 제4A권2호
• /
• pp.91-99
• /
• 2004

This paper illustrates a tie line constrained equivalent assisting generator (TEA G) model considering forced outage rates of transmission systems for reliability evaluation of interconnected power systems. Interconnections between power systems can provide improved levels of reliability. It is expected that the TEAG model developed in this paper will prove useful in the solution to problems related to the effect of transmission system uncertainties in the reliability evaluation of interconnected power systems. The characteristics and concept of this TEAG considering transmission systems are described in detail by sample studies on a simple test system.

• 대한전기학회논문지:전기기기및에너지변환시스템부문B
• /
• 제53권4호
• /
• pp.255-261
• /
• 2004

This paper presents an improved droop method which minimizes the voltage droop of a parallel-connected power supply Conventionally, the droop method has been used to achieve a simple structure and no-interconnections among power sources. However, it has a trade-off between output voltage regulation and load sharing accuracy In this paper, the droop is minimized with a current and droop gain control using steady-stage estimation. The proposed method can achieve both good voltage regulation and good load sharing. A design example of two 10㎸, 100㎃ parallel modules is made and tested to verify the proposed current-sharing method.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.613-616
• /
• 1999

An active-matrix LCD using thin film transistors (TFTs)has been widely recognized as having potential for high-quality color flat-panel displays. Pixel-Design Array Simulation Tool (PDAST) was used to profoundly understand the gate signal distortion and pixel charging capability, which are the most critical limiting factors for high-quality TFT-LCDs. Since PDAST can simulate the gate data and pixel voltages of a certain pixel on TFT array at any time and at any location on an array, the effect of the new set of capacitance models on the pixel operations can be effectively analyzed, The set of models which is adopted from VLSI interconnections calculate more precise capacitance. The information obtained from this study could be utilized to design the larger area and finer image quality panel.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.417-419
• /
• 1998

The ICD(Individual-Channel-Design) is a multivariable control design method based on the classical frequence response, in which the channel decomposition and the loop shaping on frequence domain are introduced. However, in this manner, it is difficult to satisfy time domain specifications such as overshoot, rise time, settling time. To solve the problem, we propose a new design method using CDM(Coefficient Diagram Method). And a new feedforward compensator is introduced for reducing interconnections.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 춘계 학술논문 발표대회
• /
• pp.110-111
• /
• 2019

Concrete with high thixotropy has a lower plastic viscosity when pour in, thus demonstrating fluidity, and After poured, the viscosity can be restored again to ensure stable progress without additional liquidity and material separation. Therefore, in this study, a basic study of thixotropy of concrete was proceeded through cross-linked bond of PVA and Borax. Therefore, it is judgment that the higher the concentration of boron solutions, the higher the strength of the interconnections between PVA and boron.