• 한국자기학회지
• /
• 제8권2호
• /
• pp.49-56
• /
• 1998

본 연구에서는 비등방성 에너지가 Ksin2$\theta$로 표현되는 일축 비등방성 자성체의 자기행동을 기술하는 닫힌형태 (closed-form)의 양함수들 (explicit functions)을 구하였다. 인가 자기마당, 포화 자기화량, 비등방성 에너지뿐만아니라, 자기화역전 기구에도 의존하는 돌림형, 자기화방향, 자기화갑수율을 나타내는 닫인형태의 양함수들과 결정하였다. 개발된 단힌형태의 양함수들과 실험적으로 측정 가능한 물리량들에 대한 그들의 편미분 함수들은 최소제곱맞춤법에 의한 포화 자기화량 및 비등방성 측정법의 개발, 자성 집합체의 분산된 자기적 특성 측정법의 개발 뿐만 아니라, 자기이론 계산에도 큰 기여를 하리라 사료된다.

• Journal of KIEE
• /
• 제11권1호
• /
• pp.69-77
• /
• 2001

This paper describes an image processing algorithm capable of recognizing road lanes by using a CDF(cumulative distribution function). The CDF is designed for the model function of road lanes. Based on the assumptions that there are no abrupt changes in the direction and location of road lanes and that the intensity of lane boundaries differs from that of the background, we formulated the CDF, which accumulates the edge magnitude for edge directions. The CDF has distinctive peak points at the vicinity of lane directions due to the directional and the positional continuities of a lane. To obtain lane-related information a scatter diagram was constructed by collecting edge pixels, of which the direction corresponds to the peak point of the CDF, then the principal axis-based line fitting was performed for the scatter diagram. Noises can cause many similar features to appear and to disappear in an image. Therefore, to reduce the noise effect a recursive estimator of the CDF was introduced, and also to prevent false alarms or miss detection a scene understanding index (DUI) was formulated by the statistical parameters of the CDF. The proposed algorithm has been implemented in real time on video data obtained from a test vehicle driven on a typical highway.

• 한국산학기술학회논문지
• /
• 제4권1호
• /
• pp.22-26
• /
• 2003

Attenuated PSM lithography 공정에서 overlay margin 확보 및 side-lobe 제거를 위해 기존의 Cr shield 방식의 단점인 복잡한 mask 제작공정과 구조를 단순화하기 위한 방법으로 scattering bar 방식을 제안하였다. Scattering bar는 Cr 보조패턴처럼 완전히 빛을 차단하는 것이 아니라 약간의 빛을 투과시켜 보강된 intensity를 상쇄하므로 side-lobe를 억제하는 방법으로 metal pattern을 생성할 때 scattering bar도 동시에 만들어 mask제작에 필요한 공정횟수를 줄이고 mask구조 역시 단순하게 한다 그리고 동시에 DOF(depth of focus)를 향상시킨다. Background clear pattern의 경우에 발생하는 side-lobe도 scattering bar를 이용하여 효율적으로 제거되었다.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.47-47
• /
• 2023

Drought occurs due to lack of water resources over an extended period and its intensity has been magnified globally by climate change. In recent years, drought over South Korea has also been intensed, and the prediction was inevitable for the water resource management and water industry. Therefore, drought forecasting over South Korea was performed in the current study with the following procedure. First, accumulated spring precipitation(ASP) driven by the 93 weather stations in South Korea was taken with their median. Then, correlation analysis was followed between ASP and Df4m, the differences of two pair of the global winter MSLP. The 37 Df4m variables with high correlations over 0.55 was chosen and sorted into three regions. The selected Df4m variables in the same region showed high similarity, leading the multicollinearity problem. To avoid this problem, a model that performs variable selection and model fitting at once, least absolute shrinkage and selection operator(LASSO) was applied. The LASSO model selected 5 variables which showed a good agreement of the predicted with the observed value, R²=0.72. Other models such as multiple linear regression model and ElasticNet were also performed, but did not present a performance as good as LASSO. Therefore, LASSO model can be an appropriate model to forecast spring drought over South Korea and can be used to mange water resources efficiently.

• 천문학회보
• /
• 제46권2호
• /
• pp.68.3-69
• /
• 2021

We present a novel profile stacking technique based on optimal profile decomposition of a 3D spectral line data cube, and its performance test using the HI data cubes of sample galaxies from HI galaxy surveys, THINGS and LITTLE THINGS. Compared to the previous approach which aligns all the spectra of a cube using their central velocities derived from either moment analysis, single Gaussian or hermite h3 polynomial fitting, the new method makes a profile decomposition of the profiles from which an optimal number of single Gaussian components is derived for each profile. The so-called superprofile which is derived by co-adding all the aligned profiles from which the other Gaussian models are subtracted is found to have weaker wings compared to the ones constructed in a typical manner. This could be due to the reduced number of asymmetric profiles in the new method. A practical test made on the HI data cubes of the THINGS and LITTLE THINGS galaxies shows that our new method can extract more mass of kinematically cold HI components in the galaxies than the previous results. Additionally, we fit a double Gaussian model to the superprofiles whose S/N is boosted, and quantify not only their profile shapes but derive the ratio of the Gaussian model parameters, such as the intensity ratio and velocity dispersion ratio of the narrower and broader Gaussian components. We discuss how the superprofile properties of the sample galaxies are correlated with their other physical properties, including star formation rate, stellar mass, metallicity, and gas mass.

• Journal of Korean Biological Nursing Science
• /
• 제2권2호
• /
• pp.1-19
• /
• 2000

The purpose of this study was to identify the characteristics and physiological variables of chest pain induced by exercise test in angina suspected patients. The subjects of this study consisted of 28 inpatients and outpatients aged between 40 and 75 who underwent treadmill test at exercise testing laboratory of S-University from January 2000 to June 2000. Subjects were interviewed with questionnaire regarding sociodemography, the past health history and history related to chest pain before the exercise test. Subjects were interviewed with questionnaire concerning quality, intensity, duration of chest pain induced by walking on the treadmill(Marquette, U.S.A. 1992) according to Bruce protocol following exercise test. Systolic and diastolic blood pressure were measured before, during and after the test, heart rate was determined by ECG. The results of this study were as follows ; 1) Quality of chest pain induced by exercise test were feeling stiffness 19(67.9%), heavy 10(36.0%), exploded 9(32.1%), crushing, suffocating, tight 8(28.6%), stuffy, prickly 7(25.0%), burning 6(21.4%), clasp 5(17.9%), cleaved, tensed, piercing 3(10.7%), perfectly fitting, sore 2(7.1%), tearing, tingling, ticklish, heartburn 1(3.6%). 2) Mean score of VAS(intensity of pain) following exercise test was $5.79{\pm}2.27$ and mean duration of chest pain after the test was $7.83{\pm}5.31$ minutes. 3) Sites of chest-pain induced by exercise test were middle site 11(39.3%), left-chest 10(35.6%), right-chest 6(21.5%). Radiation site of chest-pain was neck(18.0%), right flank site 1(3.6%), left shoulder & arm 2(7.1%) and back 1(3.6%). 4) Symptoms other than chest-pain induced by exercise test were dyspnea 21(75.6%), perspiration 14(50.4%), fatigue 12(43.2%), leg-pain 11(39.6%), dizziness 7(25.2%) anxiety toward chest-pain 3(10.8%), thirst 2(7.1%), and palpation, headache and tingling sensation of hand and leg 1(3.6%). 5) Mean MET(intensity of exercise) during the exercise test was $7.64{\pm}2.57$ and mean RPE(rating of perceived exertion) was $15.89{\pm}2.36$. Mean duration of exercise was $6.79{\pm}2.88$. 6) correlation coefficients between RPE and VAS was 0.500(p=0.003), those between MET and VAS was 0.287(p=0.069) and those between either depression or elevation of ST segment and VAS was 0.236(p=0.114). 7) There was a significant difference in mean systolic pressure between before and after the test as $146.29{\pm}28.18mmHg$ and $177.96{\pm}28.82mmHg$(t=-5.640, p=0.000), a significant difference in mean diastolic blood pressure between before and after the test as $84.85{\pm}15.07mmHg$ and $88.89{\pm}13.72mmHg$(t=-2.082, p=0.047), and there was a significant difference in mean heart-rate between before and after the test as $81.89{\pm}12.22/min$ and $160.68{\pm}21.77/min$(t=-21.255, p=0.000).

• 한국지구과학회지
• /
• 제28권2호
• /
• pp.202-213
• /
• 2007

2007년 1월 20일 평창군 진부면 오대산 일대에서 발생한 오대산 지진$(M_L=4.8)$은 천발지진(진원깊이 약 10 km)으로서 감진구역이 남한 남서부 일부를 제외한 전역에 이르렀다. 본진에 의한 최대 진도는 VI으로 VI에 해당하는 지역은 평창군 진부면, 도암면, 강릉, 주문진, 평창을 포함하는 지역으로서 강한 지진동과 함께 건물 실내외부 벽의 균열발생, 지붕의 기와나 스레트의 낙하 및 이동, 실내외 벽 타일의 떨어짐, 선반위 물체의 떨어짐, 도로의 낙석 등이 발생하였다. P파 초동극성과 SH/P 진폭비 자료를 이용한 단층면해는 본진의 경우 북북동-남남서 주향의 주향이동 단층운동을 나타내며, 2회의 여진은 남북 내지 북북동-남남서 주향의 역단층 운동이 우세함을 보인다. 전진, 본진 및 여진의 분포, 피해 지역 분포, 단층면해 등을 종합적으로 고려할 때 진앙지 부근에 우세하게 발달하고 있는 북북동-남남서 주향의 월정사단층이 기진 단층의 역할을 했을 것으로 추정된다. 여진 분포로 짐작컨대 subsurface에서의 이 단층의 파쇄 길이는 약 2 km로 판단되며, 추후 이 단층에 대한 고지진학적 조사가 필요하다.

• Journal of Radiation Protection and Research
• /
• 제24권4호
• /
• pp.205-213
• /
• 1999

지표에 오염된 방사성핵종의 단위방사능당 유효선량환산계수를 남성과 여성 인형모의피폭체와 MCNP4A 코드를 이용하여 계산하였다. 모사실험은 40 keV에서 10 MeV 영역의 19개 단일 에너지에 대한 유효선량 계산을 수행하였다. 에너지에 따른 단위 선원강도에 대한 유효선량 E를 기존 연구자들의 결과물인 유효선량당량 $H_E$와 비교한 결과, 본 연구의 E값이 USEPA의 FGR에 주어진 $H_E$ 값에 비해 30%의 편차를 보였다. 에너지와 유효선량의 관계를 polynomial fitting을 통해 구한 유효선량 감응함수는 다음과 같다. $f({\varepsilon})[fSv\;m^2]=\;0.0634\;+\;0.727{\varepsilon}-0.0520{\varepsilon}^2+0.00247{\varepsilon}^3$ 여기서, ${\varepsilon}$는 감마선의 에너지(MeV)이다. 감응함수와 ICRP 38의 방사성핵종 붕괴 자료를 이용하여 지표면과 공기 오염의 단위 방사능농도에 대한 유효선량환산계수를 계산한 후 DOSEFACTOR코드를 사용하여 계산한 베타선에 의한 피부선량을 합하여 90개의 중요 핵종들에 대한 환산계수를 평가하여 도표로 제시하였다. 기존 자료들과 비교를 통해 기존 환산계수를 사용할 경우 특히 저에너지 감마선이나 고에너지 베타선을 방출하는 핵종에 대해서 상당한 과소평가가 이루어질 수 있음을 확인할 수 있었다.

• 한국의학물리학회지:의학물리
• /
• 제17권1호
• /
• pp.6-16
• /
• 2006

본 연구의 목적은 세기변조 방사선 치료법(IMRT)에 의해 만들어진 DVH를 이용하여 선량의 균등률(homogeneity) 및 덮임률(coverage) 지수를 구하는 간편한 방법을 제시하는 데 있다. 새로 개발된 지수들은 DVH 곡선을 수학적으로 계단 함수에 fitting 함으로써 구해졌다. 새로 제안된 지수 l는 종양에 대한 선량의 덮임률을 잘 나타내고 있으며 이 지수가 작으면 작을수록 더 좋은 덮임률을 보여주고 있다. 또한 종양의 균등률 지수로 제안된 n 지수는 기존에 사용되고 있는 균등률 지수들보다 좀 더 정확하게 선량의 균등성을 나태내고 있음을 확인하였다. 이들 지수를 이용하여 치료계획에 바탕이 되는 토대를 제시하였으며 여기에서 제안된 지수들이 선량의 균등성과 덮임성에 대해 매우 효과적인 방법이 될 수 있음을 보여주고 있다.

• 한국근적외분광분석학회:학술대회논문집
• /
• 한국근적외분광분석학회 2001년도 NIR-2001
• /
• pp.4112-4112
• /
• 2001

The feasibility of NIR spectroscopy as a quick and nondestructive method for quality control of uniformity of coating thickness of pharmaceutical tablets was investigated. Near infrared spectra of a set of pharmaceutical tablets with varying coating thickness were measured with a diffuse reflectance fiber optic probe connected to a Broker IFS 28/N FT-NIR spectrometer. The challenging issues encountered in this study included: 1. The similarity of the formulation of the core and coating materials, 2. The lack of sufficient calibration samples and 3. The non-linear relationship between the NIR spectral intensity and coating: thickness. A peak at 7184 $cm^{-1}$ was identified that differed for the coating material and the core material when M spectra were collected at 2 $cm^{-1}$ resolution (0.4 nm at 7184 $cm^{-1}$). The study showed that the coating thickness can be analyzed by polynomial fitting of the peak area of the selected peak, while least squares calibration of the same data failed due to the lack of availability of sufficient calibration samples. Samples of coal powder and solid pieces of coal were analyzed by FT-NIR diffuse reflectance spectroscopy with the goal of predicting their ash content, percentage of volatile components, and energy content. The measurements were performed on a Broker Vector 22N spectrometer with a fiber optic probe. A partial least squares model was constructed for each of the parameters of interest for solid and powdered sample forms separately. Calibration models varied in size from 4 to 10 PLS ranks. Correlation coefficients for these models ranged from 86.6 to 95.0%, with root-mean-square errors of cross validation comparable to the corresponding reference measurement methods. The use of FT-NIR diffuse reflectance measurement techniques was found to be a significant improvement over existing measurement methodologies in terms of speed and ease of use, while maintaining the desired accuracy for all parameters and sample forms.(Figure Omitted).