• 전산구조공학
• /
• 제9권1호
• /
• pp.77-83
• /
• 1996

이 논문에서는 경계요소법을 사용하여 횡방향의 인장변형률을 받는 단일방향 graphite/epoxy 복합재료의 섬유와 기지의 공유면에 존재하는 모서리 균열에 대한 응력확대계수를 계산하였다. 그러한 균열은 복합재료의 자유경계면에서 발생하는 특이 응력들에 의해 야기될 수 있다. 응력확대계수의 크기는 균열길이가 작은 경우에는 균열길이에 따라 조금씩 증가되다가, 균열길이가 커지면 일정한 값에 이르게 된다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제21권3호
• /
• pp.236-245
• /
• 1997

The flow characteristics of developing turbulent steady flow are investigated numerically and experimentally in the entrance region of a square duct ($40 mm{\times}40 mm$ and 4, 000 mm). The numerical anaysis are incorporated by finite- volume discretization with staggered grid system and SIMPLE algorithm. The numerical solution are compared with experimental results of mean velocity profiles, turbulence intensity and entrance length. For turbulent steady flow, the turbulent components in the velocity waveforms increase as the dimensionless transverse position approaches the wall. Thrbulence intensity increases as the dimensionless transverse position increases from the center to the wall of the duct for the developing turbulent steady flows. The entrance length of the turbulent steady flow is about 40 times as large as the hydraulic diameter under the present experimental condition.

• 대한기계학회논문집A
• /
• 제27권6호
• /
• pp.969-980
• /
• 2003

The interactions between curved cracks are examined in an orthotropic plate and the effects of rectilinear anisotropy on the stress intensity factors are analyzed. The finite element alternating method (FEAM) is used in this study to get the stress intensity factors for the multiple curved cracks. To obtain analytical solutions, which is necessary in FEAM, the curved cracks are modeled as continuous distributions of dislocations, and integral equations are formulated for unknown dislocation density functions to satisfy the given resultant forces on the crack surfaces. Several basic problems are solved to verify the accuracy and efficiency of the proposed method and it can be found that present results show good agreements with the previously published results.

• Asian-Australasian Journal of Animal Sciences
• /
• 제19권10호
• /
• pp.1404-1408
• /
• 2006

In order to investigate the genetic marker associated with economic performance in Hanwoo (Korean Brown Cattle), proteomic approach was used. Breeding values were estimated from performance tested steers. The top 20 and bottom 19 steers based on carcass weight (CW), eye muscle area (EMA), backfat thickness (BF) and marbling score (MS) evaluation for one progeny testing period was used. Meat samples dissected from longissimus dorsi muscles were taken from the slaughter house and analyzed for two-dimensional gel electrophoresis. A total of 102 significant spots out of total 146 on each gel were detected and compared with the reference gel (synthetic gel) to be evaluated. Four candidate spots for marbling score were identified: 205, 84, 204 and 198. The study confirmed the relationship between breeding values of economic traits of Hanwoo cattle and spot intensity.

• 한국환경복원기술학회지
• /
• 제4권1호
• /
• pp.24-31
• /
• 2001

Most of the natural calamities occurred in South Korea are due to rainfall, which are occurred during rainy season, June to September. The life-calamity reported in those seasons were over 75%, and the dead rate by the rainfall was about 98%. Especially, the disasters occurred in Pusan and Kyongsang-Namdo were highest of the whole country. The capability of landslide in this area was very high, which is included to Class 3 or Class 4 of disastrous risk grade suggested by the GIS system(Lee Su-Gon,1999). Those are based on the characteristics of topographical and meteorological data. In this study, the rainfall characteristics in Pusan were analyzed through the relationship between the cumulative rainfall and the maximum hourly rainfall. The landslide in this area depends on the elapsed time after maximum hourly rainfall intensity, and the most of landslide in Pusan recorded during within 3 hours after pick-time of rainfall intensity.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집A
• /
• pp.411-414
• /
• 2000

Optical Triangulation Probes (OTPs) are widely used for their simple structure. high resolution, and long operating range. However, errors originating from speckle, inclination of the object, source power fluctuation, ambient light, and noise of the detector limit their usability. In this paper, we propose new design criteria for an error-reduced OTP. The light source module for the system consists of an incoherent light source and a multimode optical fiber for eliminating speckle and shaping a Gaussian beam Intensity profile. A diffuse-reflective white copy paper, which is attached to the object, makes the light intensity distribution on the change-coupled device(CCD). Since the peak positions of the intensity distribution are not related to the various error sources, a sub-pixel resolution signal processing algorithm that can detect the peak position makes it possible to construct an error-reduced OTP system

• 대한기계학회논문집A
• /
• 제27권8호
• /
• pp.1273-1280
• /
• 2003

In this paper, transparent dynamic photoelastic experimental hybrid method for propagating cracks in orthotropic material was developed. Using transparent dynamic photoelastic experimental hybrid method, we can obtain stress intensity factor and separate the stress components from only isochromatic fringe patterns without using isoclinics. When crack is propagated with constant velocity, the contours of stress components in the vicinity of crack tip in orthotropic material are similar to those of isotropic material or orthotropic material with stationary crack under the static load. Dynamic stress intensity factors are decreased as crack growths. It was certified that the dynamic photoelastic experimental hybrid method was very useful for the analysis of the dynamic fracture mechanics.

• 한국경영과학회지
• /
• 제33권4호
• /
• pp.1-12
• /
• 2008

The study suggests an answer to the question of what determines category diversification of Internet portals in Korea. First, as external factors, competition intensity and market growth are hypothesized to have influence on the degree of category diversification. Second, an internal factor, user loyalty to portals, is hypothesized to influence negatively category diversification. The study performed empirical analysis based on weekly portal-specific panel data of eighteen internet portals in Korea during the period between 2001 and 2004. The result shows that category diversification increases as competition intensity increases, and that category diversification decreases as user loyalty increases. There was no effect of market-level growth rate on category diversification.

• 대한방사선기술학회지:방사선기술과학
• /
• 제42권6호
• /
• pp.455-460
• /
• 2019

This study compared the radiation transmission and image quality of polymethylmethacrylate (PMMA), polycarbonate (PC), and carbon, which are common components of the compression plates currently used during breast imaging. In addition to measuring the transmitted dose and the intensity without the use of a compression paddle, the four different compression paddles were evaluated according to the material and thickness of each paddle. Radiation transmittance, maximum intensity, and plot profile type w ere all evaluated for each material, and for each factor evaluated the follow ing order w as noted, from best to w orst: carbon 4 mm, PMMA 3 mm, PMMA 4 mm, and PC 4 mm. It is necessary to study a variety of materials and thicknesses in order to find the optimal combination of material and thickness, because not only does the material have a large influence in reducing the radiation exposure during mammography, but the thickness of the compression plate also has a great influence.

• KSTLE International Journal
• /
• 제5권1호
• /
• pp.7-13
• /
• 2004

The inclined subsurface cracks in a homogeneous body subjected to a moving compressive load is analyzed with the finite element method (FEM) considering friction on the crack surface. The stress intensity factors for the inclined subsurface cracks are evaluated numerically for various cases such as different inclined angles and changes in the coefficient of friction. The effects of the inclined angle and the coefficient of friction on the stress intensity factor are discussed. The difference between the behaviors of the parallel subsurface crack and those of the inclined subsurface crack is also examined.