• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.12B
• /
• pp.1574-1585
• /
• 2011

This paper proposes a real-time algorithm for speed limit sign recognition for advanced safety vehicle system. The proposed algorithm uses Block-DCT in extracting features from a given ROI(Region Of Interest) instead of using entire pixel values as in previous works. The proposed algorithm chooses parts of the DCT coefficients according to the proposed discriminant factor, uses correlation coefficients and variances among ROIs from training samples to reduce amount of arithmetic operations without performance degradation in classification process. The algorithm recognizes the speed limit signs using the information obtained during training process by calculating LDA and Mahalanobis Distance. To increase the hit rate of recognition, it uses accumulated classification results computed for a sequence of frames. Experimental results show that the hit rate of recognition for sequential frames reaches up to 100 %. When compared with previous works, numbers of multiply and add operations are reduced by 69.3 % and 67.9 %, respectively. Start after striking space key 2 times.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.1-8
• /
• 2012

In this paper, we propose an algorithm to improve collision avoidance in Vehicle-to-Vehicle (V2V) networks based on IEEE 802.11p. Since IEEE 802.11p adopts CSMA/CA as a multiple access scheme and an emergency warning message (EWM) is delivered to behind vehicles in a multi-hop manner, due to transmission collision, the more vehicles in the vehicle chain results in a longer delay. The longer delay increases the possibility of a rear-end collision. In order to ensure message reception with low latency, we consider implicit acknowledgement of a broadcasted EWM message and propose an algorithm to reduce redundant message transactions, called Two-Way Implicit Acknowledgement (TWIA). By simulations, we show that our proposed algorithm can reduce the latency until the last car receives the message by 9% and the success rate every car receives the message within 0.7sec by 12% at 100 fixed-number-of-car environment.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.40 no.4
• /
• pp.10-20
• /
• 2017

The proportion of software in the automotive industry is steadily increasing due to the rapid technological development of automobile E/E parts. Because the automotive E/E technology is now on the basis of intelligent automobile and advanced safety automobile technology. The purpose of this study is to investigate the effect of organizational capability (organizational resource capability and management capability), process capability (process capability, customer Requirement management capability), performance dimension (motivation, participation level). In this study, we conducted questionnaires and statistical analysis on engineers (members of the Korea Advanced Automotive Technology Association) who perform research and development activities in the R&D organization of the automotive E/E part in South Korea. ANOVA is applied for the verification of the difference in performance measured by organizational capability, process maturity, and motivation participation level according to company characteristics (level of processing : supply chain configuration, annual sales, total SW development ratio). According to the results of this study, in order to improve the performance of ASPICE or ISO 26262-related consulting project, a different consulting approach strategy considering the characteristics of organization and personnel is needed. In summary, the analysis results for the three main treatment levels are as follows. The difference in organizational capacity, process capability and performance was found to be statistically significant according to supply chain configuration and annual sales, but it was found that the difference of response according to the proportion of total SW was not significant.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.27 no.6
• /
• pp.1467-1482
• /
• 2017

Recently, Interests on The Fourth Industrial Revolution has been increased. In the manufacturing sector, the introduction of Smart Factory, which automates and intelligent all stages of manufacturing based on Cyber Physical System (CPS) technology, is spreading. The complexity and uncertainty of smart factories are likely to cause unexpected problems, which can lead to manufacturing process interruptions, malfunctions, and leakage of important information to the enterprise. It is emphasized that there is a need to perform systematic management by analyzing the threats to the Smart Factory. Therefore, this paper systematically identifies the threats using the STRIDE threat modeling technique using the data flow diagram of the overall production process procedure of Smart Factory. Then, using the Attack Tree, we analyze the risks and ultimately derive a checklist. The checklist provides quantitative data that can be used for future safety verification and security guideline production of Smart Factory.

• Journal of Korea Water Resources Association
• /
• v.52 no.8
• /
• pp.565-573
• /
• 2019

An optimization model of water intake planning is developed based on a linear programming (LP) for the intelligent water purification plant operation system. The proposed optimization model minimizes the water treatment costs of raw water purification by considering a time-delay of treatment process and hourly electricity tariff, which is subject to various operation constraints, such as water intake limit, storage tank capacity, and water demand forecasts. For demonstration, the developed model is applied to H water purification center. Here, we have tested three optimization strategies and the results are compared and analyzed in economic and safety aspects. The optimization model is expected to be used as a decision support tool for optimal water intake scheduling of domestic water purification centers.

• Journal of Advanced Navigation Technology
• /
• v.27 no.6
• /
• pp.798-803
• /
• 2023

In the industrial internet of things (IIoT) industry, including smart factories, there are many cases where electronic devices are complexly combined and installed due to the recent development of intelligent information technology. Electromagnetic waves generated from such complex facilities affect other devices and services, which can lead to safety issues. The problem such as electromagnetic interference (EMI) and electromagnetic compatibility (EMC) generated when controlling complex facilities is an essential element that must be solved, and the engineering basis for EMI and EMC must be established to foster the industry of complex facilities. Therefore, in this study, EMC & EMI engineering demonstration cases for solar power fixed facilities using the national standard guideline have been analyzed. The results show that the electromagnetic risk indices in the solar power facilities have been degraded up to control level, and a national EMC engineering system has been proposed for complex facilities.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.6
• /
• pp.85-91
• /
• 2020

Recently, video-taping equipment such as CCTV have been seeing more use for crime prevention and general safety concerns. Since these video-taping equipment operates all throughout the day, the need for security personnel is lessened, and naturally costs incurred from managing such manpower should also decrease. However, technology currently used predominantly lacks self-sufficiency when given the task of searching for a specific object in the recorded video such as a person, and has to be done manually; current security-based video equipment is insufficient in an environment where real-time information retrieval is required. In this paper, we propose a technology that uses the latest deep-learning technology and OpenCV library to quickly search for a specific person in a video; the search is based on the clothing information that is inputted by the user and transmits the result in real time. We implemented our system to automatically recognize specific human objects in real time by using the YOLO library, whilst deep learning technology is used to classify human clothes into top/bottom clothes. Colors are also detected through the OpenCV library which are then all combined to identify the requested object. The system presented in this paper not only accurately and quickly recognizes a person object with a specific clothing, but also has a potential extensibility that can be used for other types of object recognition in a video surveillance system for various purposes.

• Journal of Internet of Things and Convergence
• /
• v.8 no.6
• /
• pp.55-63
• /
• 2022

In recent years, with the rapid development of large and medium-sized urban rail transit in China, the total operating mileage of high-speed railway and the total number of EMUs(Electric Multiple Units) are rising. The system complexity of high-speed EMU is constantly increasing, which puts forward higher requirements for the safety of equipment and the efficiency of maintenance.At present, the maintenance mode of high-speed EMU in China still adopts the post maintenance method based on planned maintenance and fault maintenance, which leads to insufficient or excessive maintenance, reduces the efficiency of equipment fault handling, and increases the maintenance cost. Based on the intelligent operation and maintenance technology of PHM(prognostics and health management). This thesis builds an integrated PHM platform of "vehicle system-communication system-ground system" by integrating multi-source heterogeneous data of different scenarios of high-speed EMU, and combines the equipment fault mechanism with artificial intelligence algorithms to build a fault prediction model for traction motors of high-speed EMU.Reliable fault prediction and accurate maintenance shall be carried out in advance to ensure safe and efficient operation of high-speed EMU.

• Journal of Computing Science and Engineering
• /
• v.6 no.1
• /
• pp.40-50
• /
• 2012

Increase in the number of older people due to demographic changes poses great challenges to the social healthcare systems both in the Western and as well as in the Eastern countries. Support for older people by formal care givers leads to enormous temporal and personal efforts. Therefore, one of the most important goals is to increase the efficiency and effectiveness of today's care. This can be achieved by the use of assistive technologies. These technologies are able to increase the safety of patients or to reduce the time needed for tasks that do not relate to direct interaction between the care giver and the patient. Motivated by this goal, this contribution focuses on applications of acoustic technologies to support users and care givers in ambient assisted living (AAL) scenarios. Acoustic sensors are small, unobtrusive and can be added to already existing care or living environments easily. The information gathered by the acoustic sensors can be analyzed to calculate the position of the user by localization and the context by detection and classification of acoustic events in the captured acoustic signal. By doing this, possibly dangerous situations like falls, screams or an increased amount of coughs can be detected and appropriate actions can be initialized by an intelligent autonomous system for the acoustic monitoring of older persons. The proposed system is able to reduce the false alarm rate compared to other existing and commercially available approaches that basically rely only on the acoustic level. This is due to the fact that it explicitly distinguishes between the various acoustic events and provides information on the type of emergency that has taken place. Furthermore, the position of the acoustic event can be determined as contextual information by the system that uses only the acoustic signal. By this, the position of the user is known even if she or he does not wear a localization device such as a radio-frequency identification (RFID) tag.

• Journal of the Korea Institute of Building Construction
• /
• v.11 no.3
• /
• pp.283-291
• /
• 2011

As the construction industry has recently been transformed by the emergence of ubiquitous and intelligent technology, there have been major changes in the management methods employed. Specifically, next-generation construction management systems have been developed that collect and analyze many pieces of information in real time by using various wireless sensors and networks. The purpose of this study is to understand the current status of Ubiquitous Sensor Networks (USN) in the construction sector, and to gain fundamental data for a system of measuring concrete curing temperature in a construction site that employs a USN. By investigating the application status of USN, it was confirmed that USN has mainly been applied to the maintenance of facilities, safety management, and quality control. In addition, a field experiment in which the curing temperature of concrete was measured using a USN was carried out to evaluate two systems with wireless sensor networks, and the applicability of these systems on site was confirmed. However, it is estimated that the embedded wireless sensor type is affected by metal equipment on site, internal battery of sensor and concrete depth, and studies to provide more stable system by USN are thus required.