• Journal of Korean Society of Transportation
• /
• v.30 no.1
• /
• pp.85-101
• /
• 2012

Parking guidance and information systems have been introduced to response the inefficient and inconvenience use of parking facilities. While advanced countries have reached effective use of parking guidance information system, the Republic of Korea has yet suffered from the lack of full use of advanced technologies. This study proposes an algorithm designed for a systems utilizing the USN technologies. A field test was performed. The test results showed that information from the proposed system is much reliable when compared to the one from the existing.

• Journal of Auto-vehicle Safety Association
• /
• v.10 no.2
• /
• pp.20-28
• /
• 2018

Currently, sharp increase of car is on the rise as a serious social problem due to loss of lives from car accident and environmental pollution. There is a study on ITS (Intelligent Transportation System) to seek coping measures. As for the commercialization of ITS, we aim for occupancy of world market through ASV (Advanced Safety Vehicle) related system development and international standardization. However, the domestic environment is very insufficient. Core factor technologies of ITS are Adaptive Cruise Control, Lane Keeping Assist System, Forward Collision Warning System, AEB (Autonomous Emergency Braking) system etc. These technologies are applied to cars to support driving of a driver. AEB system is stop the car automatically based on the result decided by the relative speed and distance with obstacle detected through sensor attached on car rather than depending on the driver. The purpose of AEB system is to measure the distance and speed of car and to prevent accident. Thus, AEB will be a system useful for prevention of accident by decreasing car accident along with the development of automobile technology. This study suggests a scenario to suggest a test evaluation method that accords with domestic environment and active response of international standard regarding the test evaluation method of AEB. Also, by setting the goal with function for distance, it suggests theoretic model according to the result. And the study aims to verify the theoretic evaluation standard per proposed scenario using car which is installed with AEB device through field car driving test on test road. It will be useful to utilize the suggested scenario and theoretical model when conducting AEB test evaluation.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.11 no.5
• /
• pp.1-6
• /
• 2012

Unlike the past, modern urban intersections have dramatic growth in size and utilizations. As a result, continual traffic signal control is essential. Hence the individual or regional electrical blackout may bring about uncontrollable traffic congestion. Late summer of 2011 a regional blackout brought about traffic nightmare not including time and revenue loss associated with this disaster. Due to this disaster our national police agency and other government agencies are in process of introducing an UPS (uninterruptible power supply) system into essential intersections. This study estimates the power consumption necessary to sustain at least 2 continuous hours for a standard four-legged intersection. Prototype was studied using these standards. The field experiment of prototype showed positive results and was able to meet standard guidelines set forth. Prototype tested was able to meet standards in medium to large capacity of traffic size.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.1
• /
• pp.37-44
• /
• 2009

Density is the most important congestion indicator among the three fundamental flow variables, flow, speed and density. Measuring density in the field has two different ways, direct and indirect. Taking photos with wide views is one of direct ways, which is not widely used because of its cost and lacking of proper positions. Another direct density measuring method using two spot detectors has been introduced with the concept of instantaneous density, average density and measurement interval. The relationship between accuracy and measurement interval has been investigated using the simulation data produced by Paramics API function. Finally, density measurement algorithm has been suggested including exponential smoothing for device development.

• Journal of the Korea Society of Computer and Information
• /
• v.25 no.4
• /
• pp.165-172
• /
• 2020

In this paper we propose an uses on-device-based edge computing technology and big data analysis methods through the use of on-device-based edge computing technology and analysis of big data, which are distributed computing paradigms that introduce computations and storage devices where necessary to solve problems such as transmission delays that occur when data is transmitted to central centers and processed in current general smart factories. However, even if edge computing-based technology is applied in practice, the increase in devices on the network edge will result in large amounts of data being transferred to the data center, resulting in the network band reaching its limits, which, despite the improvement of network technology, does not guarantee acceptable transfer speeds and response times, which are critical requirements for many applications. It provides the basis for developing into an AI-based facility prediction conservation analysis tool that can apply deep learning suitable for big data in the future by supporting intelligent facility management that can support productivity growth through research that can be applied to the field of facility preservation and smart factory industry with integrated hardware technology that can accommodate these requirements and factory management and control technology.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.4
• /
• pp.527-532
• /
• 2012

Recently, in power system, even though the needs of protective IED(Intelligent Electronic Device) is highly increased, there are some problems in the field when use the IED. When the IED is in the fluctuated overload condition, because of the existing algorithm calculate the trip time only with the measured current of just previous measuring stage, the calculated trip time is not a proper value for the overload protection at this kind of condition, and when the load current fluctuate between overload and normal condition, because of the instantaneous reset characteristic of existing algorithm the IED dose not trip. And the non linear loads using power electronic elements seem to be increased. These non linear loads require a counterplan about various harmonics incoming to electric power systems. So we will give solutions about these problems.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1032-1038
• /
• 2008

KTX train system is composed of TORNAD* network for transmitting information of train's internal equipments and OBCS which proceed information within train. OBCS of one trainset consisted of 28 equipments takes intelligent and dynamic composition according to equipment handling, train command and control flow. Each OBCS which is installed within trainset handle and supervise mutually action information about equipments, transmit it to driver to transmit information about train operation and preventive management. This mutual supervision and information transmission use KTX TORNAD* network system. TORNAD* network system is the one which is uniquely developped by GEC ALSTHOM, the KTX trainset manafacturing provider and this field is excluded from technical know-how transfer item. Through the research on analysis method of KTX TORNAD* system data structure which is operating on Seoul-Pusan Line, I hope that this thesis can contribute to train network system's standardization after applying it to improvement of train network system maintenance, enhancing quality of train service and applying it to future Korean rolling stock network system development.

• Electronics and Telecommunications Trends
• /
• v.36 no.3
• /
• pp.12-22
• /
• 2021

Since the technical realization of self-aligned planar complementary metal-oxide-semiconductor field-effect transistors in 1960s, semiconductor manufacturing has aggressively pursued scaling that fruitfully resulted in tremendous advancement in device performances and realization of features sizes smaller than 10 nm. Due to many intrinsic material and technical obstacles, continuing the scaling progress of semiconductor devices has become increasingly arduous. As an effort to circumvent the areal limit, stacking devices in a three-dimensional fashion has been suggested. This approach is commonly called monolithic three-dimensional (M3D) integration. In this work, we examined technical issues that need to be addressed and overcome to fully realize energy efficiency, short latency and cost competency. Full-fledged M3D technologies are expected to contribute to various new fields of artificial intelligence, autonomous gadgets and unknowns, which are to be discovered.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.957-962
• /
• 2005

Today, the elderly is increasing gradually in the Republic of Korea society and this problem will be more serious in the near future. Therefore, engineering support for aged people is required. We are establishing a new field of healthcare engineering for elderly people and aiming to support for aged people and disabled people using adaptive control and instrument technology. In this paper, the goal is to implement the shared control of a robot mobility aid for the elderly. As using this type of assistive technology to be useful by its intended user community, it supports elderly people and handicapped people to live independently in their private homes. The interface transforms the force applied by the user into the robot's motion. Devices like buttons, joysticks, and levers already exist for relaying user input; however, they require hand displacement that would loosen or otherwise release the user's hold. Such interfaces make operation very difficult and potentially unsafe. Therefore, we propose a shared control system. It's safe more than joysticks and buttons. The shared control is a means of registering the user's intention through physical interaction. It's an important component in the development of robotic elderly assistant. The concept of shared control describes a system which is two or more independent control systems. We are using that the three component blocks consist of pressure sensor (flexible force sensor), circuit of measurement and transfer function. Experimental trials of this paper have been tested at the indoor environment. The robot is able to know the user intended direction through haptic device were logged along with the robot's force sensor.

• International journal of advanced smart convergence
• /
• v.5 no.3
• /
• pp.66-71
• /
• 2016

Smart building gate security control system using smartphone integrated with near field communication (NFC) has become part of daily life usage these days. The technology change in replacing RF NFC device using visible light communication technology based approach growing faster in recent days. This paper propose a design and development of gate security control system using color code based user authentication ID generation as part of an intelligent access control system to control automatic door open and close. In this approach gate security access control use the recent visible light communication technology trends to transfer the user specific authentication code to door access control system using color code on smartphone screen. Using a camera in the door access control system (ACS), color codes on smartphone screens are detected and matched to the database of authenticated user to open the door automatically in gate security system. We measure the visual light communication technology efficiency as a part of the research and the experiments have revealed that more than 95% users authenticated correctly at the suggested experiment environment on gate security control system.