• Journal of the Korean Association of Geographic Information Studies
• /
• v.5 no.4
• /
• pp.75-85
• /
• 2002

The introduction of GPS technique in transportation study make real time tracking of driving vehicle's position possible. Position information data gauged with three dimension(X, Y, Z) can be achieved with time-continuity and from more than two driving vehicles. For this field of study, in past day, there were many difficulties in collecting real time data, but now, it becomes easy thanks to this. But for the resonable result analysis, fully understanding of GPS data-accuracy must be proceeded. Because accompanied magnitude of error depends on the study's accuracy. For this reason, this study surveyed the GPS data's error and suggest calibrate technique. This study's result will be helpful for following studies using DGPS data. For this, this study takes two types study in road, and set triangulation coordinates, and compare it with GPS data. DGPS data contains less than 0.6m's error.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37B no.12
• /
• pp.1113-1118
• /
• 2012

Smart grid and intelligent transportation system draw significant interest since they are considered as one of the green technologies. These systems require a large number of sensors, actuators, and controllers. Also, machine-to-machine (M2M) communications is important because of the automatic control. The LTE-Advanced networks is preparing a set of functions that facilitate the M2M communications, and particularly the development of an efficient call admission control mechanism is critical. A method that groups MTC devices according to QoS constraints and determines the admission depending on the QoS satisfaction is limitedly applied only if the data transmission period and the maximum delay are identical. This paper proposed a call admission control that is free from such limitation and also optimizes the admission process under the certain condition of the transmission period and maximum delay. The theorems regarding the proposed method are presented with the proofs. The simulations confirms its validity and shows it is better in call admission probability than existing works.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.126-132
• /
• 2011

In the application areas of LBS(Location Based Service) and ITS(Intelligent Transportation System), continuous k-nearest neighbor query(CkNN) which is defined as a query to find the nearest points of interest to all the points on a given path is widely used. It is necessary to acquire results quickly in the above applications and be applicable to spatial network databases. It is also able to cope successfully with frequent updates of POI objects. This paper proposes a new method to search nearest POIs for moving query objects on the spatial networks. The method produces a set of split points and their corresponding k-POIs as results with partial order among k-POIs. The results obtained from experiments with real dataset show that the proposed method outperforms the existing methods. The proposed method achieves very short processing time(15%) compared with the existing method.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.7 no.8
• /
• pp.1933-1954
• /
• 2013

Multiple wireless devices are being widely deployed in Intelligent Transportation System (ITS) services on the road to establish end-to-end connection between vehicle-to-vehicle (V2V) and vehicle-to-infrastructure (V2I) networks. Vehicular ad hoc networks (VANETs) play an important role in supporting V2V and V2I communications (also called V2X communications) in a variety of urban environments with distinct topological characteristics. In fact, obstacles such as big buildings, moving vehicles, trees, advertisement boards, traffic lights, etc. may block the radio signals in V2X communications. Their impact has been neglected in VANET research. In this paper, we present a realistic and efficient radio propagation model to handle different sizes of static and moving obstacles for V2X communications. In the proposed model, buildings and large moving vehicles are modeled as static and moving obstacles, and taken into account their impact on the packet reception rate, Line-of-sight (LOS) obstruction, and received signal power. We use unsymmetrical city map which has many dead-end roads and open faces. Each dead-end road and open faces are joined to the nearest edge making a polygon to model realistic obstacles. The simulation results of proposed model demonstrates better performance compared to some existing models, that shows proposed model can reflect more realistic simulation environments.

• Journal of Communications and Networks
• /
• v.14 no.6
• /
• pp.662-671
• /
• 2012

Plug-in hybrid electric vehicles (PHEVs) will be widely used in future transportation systems to reduce oil fuel consumption. Therefore, the electrical energy demand will be increased due to the charging of a large number of vehicles. Without intelligent control strategies, the charging process can easily overload the electricity grid at peak hours. In this paper, we consider a smart charging and discharging process for multiple PHEVs in a building's garage to optimize the energy consumption profile of the building. We formulate a centralized optimization problem in which the building controller or planner aims to minimize the square Euclidean distance between the instantaneous energy demand and the average demand of the building by controlling the charging and discharging schedules of PHEVs (or 'users'). The PHEVs' batteries will be charged during low-demand periods and discharged during high-demand periods in order to reduce the peak load of the building. In a decentralized system, we design an energy cost-sharing model and apply a non-cooperative approach to formulate an energy charging and discharging scheduling game, in which the players are the users, their strategies are the battery charging and discharging schedules, and the utility function of each user is defined as the negative total energy payment to the building. Based on the game theory setup, we also propose a distributed algorithm in which each PHEV independently selects its best strategy to maximize the utility function. The PHEVs update the building planner with their energy charging and discharging schedules. We also show that the PHEV owners will have an incentive to participate in the energy charging and discharging game. Simulation results verify that the proposed distributed algorithm will minimize the peak load and the total energy cost simultaneously.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.1B
• /
• pp.1-8
• /
• 2012

In this paper, we propose an algorithm to improve collision avoidance in Vehicle-to-Vehicle (V2V) networks based on IEEE 802.11p. Since IEEE 802.11p adopts CSMA/CA as a multiple access scheme and an emergency warning message (EWM) is delivered to behind vehicles in a multi-hop manner, due to transmission collision, the more vehicles in the vehicle chain results in a longer delay. The longer delay increases the possibility of a rear-end collision. In order to ensure message reception with low latency, we consider implicit acknowledgement of a broadcasted EWM message and propose an algorithm to reduce redundant message transactions, called Two-Way Implicit Acknowledgement (TWIA). By simulations, we show that our proposed algorithm can reduce the latency until the last car receives the message by 9% and the success rate every car receives the message within 0.7sec by 12% at 100 fixed-number-of-car environment.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.563-565
• /
• 2010

LED is low power and pro-environment semiconductor element. That can be used not only as the lighting function but also for Visible Light Communication(VLC). The VLC is the communication technology that can send data by blinking a fluorescent or LED using visible spectrum. That velocity of blinking can not be usually recognized by eyesight. Visible Light Communication using LED can be used in many fields. In the field of ITS(Intelligent Transportation System), Under construction on the road, Emitting traffic signs can be applied to transfer the vehicle information. In this paper, Emitting traffic signs in addition to the VLC give information about road condition, safety distance and the lane change. We design Communication protocol to provide safety service and verify protocol by experiment.

• Journal of Convergence for Information Technology
• /
• v.9 no.12
• /
• pp.54-61
• /
• 2019

Recently, IITS (intelligent integrated transportation system) has been important topic in Smart City related industry. As a main objective of IITS, prevention of traffic jam (due to car accidents) has been attempted with help of advanced sensor and communication technologies. Studies show that car accident has certain correlation with some factors including characteristics of location, weather, driver's behavior, and time of day. We concentrate our study on observing auto correlativity of car accidents in terms of time of day. In this paper, we performed the ARIMA tests including ADF (augmented Dickey-Fuller) to check the three factors determining auto-regressive, stationarity, and lag order. Summary on forecasting of hourly car crash counts is presented, we show that the traffic accident data obtained in Korea can be applied to ARIMA model and present a result that traffic accidents in Korea have property of being recurrent daily basis.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.18 no.7
• /
• pp.1726-1748
• /
• 2024

Trajectory planning is vital for autonomous systems like robotics and UAVs, as it determines optimal, safe paths considering physical limitations, environmental factors, and agent interactions. Recent advancements in trajectory planning and future location prediction stem from rapid progress in machine learning and optimization algorithms. In this paper, we proposed a novel framework for Spatial-temporal transformer-based feed-forward neural networks (STTFFNs). From the traffic flow local area point of view, skip-gram model is trained on trajectory data to generate embeddings that capture the high-level features of different trajectories. These embeddings can then be used as input to a transformer-based trajectory planning model, which can generate trajectories for new objects based on the embeddings of similar trajectories in the training data. In the next step, distant regions, we embedded feedforward network is responsible for generating the distant trajectories by taking as input a set of features that represent the object's current state and historical data. One advantage of using feedforward networks for distant trajectory planning is their ability to capture long-term dependencies in the data. In the final step of forecasting for future locations, the encoder and decoder are crucial parts of the proposed technique. Spatial destinations are encoded utilizing location-based social networks(LBSN) based on visiting semantic locations. The model has been specially trained to forecast future locations using precise longitude and latitude values. Following rigorous testing on two real-world datasets, Porto and Manhattan, it was discovered that the model outperformed a prediction accuracy of 8.7% previous state-of-the-art methods.

• Journal of Korean Society of Transportation
• /
• v.25 no.6
• /
• pp.197-208
• /
• 2007

Enormously sized buildings are appearing world-wide with the advancement of construction techniques. Large-scaled and complicated structures will have increased difficulties for dealing with safety, and will demand well-matched safety measures. This research introduced up-to-date techniques and systems which are applied in buildings in foreign nations. Furthermore, it proposed s direct guidance plan for buildings in case of fire. Since it is possible to install wireless sensor networks which detect fires or effects of fire, the plan makes use of this information. Accordingly, the authors completed a direct guidance plan that was based on omnidirectional guidance lights. It is possible to select a route with concern about both time and capacity with a concept of a non-dominated path. Finally, case studies showed that quickest path algorithms were effective for guiding efficient dispersion routes and in case of restriction of certain links in preferred paths due to temperature and smoke, it was possible to avoid relevant links and to restrict demand in the network application. Consequently, the algorithms were able to maximize safety and minimize evacuation time, which were the purposes of this study.