• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.17 no.1
• /
• pp.100-113
• /
• 2018

The Proximity Service, which is one of the most popular network capacity improvement methods, uses the frequency reuse in order to increase the frequency efficiency. As a result, inter-cell interference between cellular and proximity service users occurs at a cell edge. In this paper, we proposed a mitigation scheme for inter-cell interference, where we suggested a new function of and eNB with ProSe function exchanging information about ProSe parameters and ProSe user equipment with neighboring cells via the X2 interface. As the first step, the resource which did not cause the inter-cell interference problem were pre-allocated through the frequency sensing in the ProSe direct discovery. As the next step, the inter-cell interference problem was solved by reallocating appropriate resources based on the ProSe application code, the ProSe application QoS, the ProSe application ID and validity timer in ProSe direct communication.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.12 no.1
• /
• pp.51-57
• /
• 2013

Leak detection, the system is controlled by humanity's precious water resources, prepare for natural disasters and prevent damage to buildings and various industrial facilities. Especially because it causes serious environmental pollution, chemicals or oil spills, leak detection of various liquid(oil, water), the point at which the liquid leak is detected early on, and minimize environmental pollution, prevent damage of the equipment due to the leak, and the country's precious water resources to be used safely. In this paper, we solve these problems by using specialized film sensor, any person who is not a skilled technician, equipment or walls anywhere can be easily installed. also reduce unnecessary circuit, If film sensor is connected to operate, have a big competitive price, the detection of liquid and the surrounding environment according to, the sensor film that can set the sensitivity control, and monitoring system was implemented.

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• 2007.11a
• /
• pp.977-982
• /
• 2007

There have been many efforts in automatic object recognition using computing technologies. Especially in the development of automated construction equipment, automatic object recognition is very important issue for the proper equipment maneuvering. 3D laser scanning, which uses (time-of-flight) method to construct the 3-dimensional information, is applied to the civil earth work environment for its high accuracy, quick data collection, and object recognition capability that will be developed by the authors in the future. The 3D earth model is also used as a fundamental information for intelligent earth work task planning. This paper presents the analysis of the 3D laser scanner market and selection of the most optimum 3D scanner for the intelligent earth work planning. As well as the hardware configuration for the automated 3D earth modeling is developed but also the software structure and detailed user interface are designed in this research. In addition, it is presented in this paper that the accuracy comparison test between TotalStation(R) which is a traditional survey tool and ScanStation(R). The accuracy test is done by relative distance measurement using known targets.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.107-117
• /
• 2008

OBE(On Board Equipment) of IR(Infrared)/RF(Radio Frequence)-DSRC(Dedicated Short Range Communication) are set up 1.25 million cars because Korea Highway Cooperation supplied in HiPass(Domestic Electronic Toll Collection System). But this DSRC system has strength and weakness of service for BIS(Bus Information System) or UTIS(Urban Traffic Information System) because BIS and UTIS are required vary high communication's performance and management. In this paper, Efficiency of IR/RF-DSRC is analyzed performance of MAC(Medium Access Control) by computer simulation for services of BIS or UTIS, so Suggested to be commensurated with medium of there service. Specially, DSRC is needed high mobility and throughput in the vary short communication range, so Analysed the transmission rate of data in each communication medium over the specific character of the MAC frame.

• Journal of Navigation and Port Research
• /
• v.44 no.6
• /
• pp.557-563
• /
• 2020

Digital Twin Technology is currently being utilized in many industries and logistics seems soon to follow that trend. Currently, technology introduction to container terminals is restrictedly developing. In reviewing the existing literature, it became clear that research on the application of Digital Twin technology for container terminals is deficient. This study fulfilled AHP and IPA analysis causing fields to adjust priority at the container terminal. The result of analysis on the urgent necessity of adjustable fields' detailed elements from Digital Twin Technology, ATC, intelligent CCTV, and container yards, and showed that they were of the highest priority level. Also, VR/AR Equipment, AYT, Smart Container, Automated Container Delivery Facility, Refrigerated/Freezer Container, Wearable Device for Port Maintenance, and Smart Buoy were reviewed in detail. Our group suggests AQC, Berth, AGV, ASC, Apron, and Automated Mooring as potentially useful Digital Twin Technologies. Finally, our research suggests the OSS equipment, intermodal linkage facility, intelligent drone, and hazardous material storage are areas of low priority.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.6
• /
• pp.83-89
• /
• 2022

Internet of Things technology is rapidly developing due to the recent development of information and communication technology. IoT technology utilizes various sensors to generate unique data from each sensor, enabling diagnosis of system status. However, the equipment management system currently in effect is a post-preservation concept in which administrators must deal with the problem after the problem occurs, which could mean system reliability and availability problems due to system errors, and could result in economic losses due to negative productivity disruptions. Therefore, this study confirmed that edge controller control decision algorithms for more efficient operation of rectifiers in the factory by applying intelligent IoT (AIoT) technology and domain knowledge-based modeling for each sensor data collected based on this, outputting appropriate status messages for each scenario.

• Fisheries and Aquatic Sciences
• /
• v.25 no.3
• /
• pp.140-150
• /
• 2022

A method of ultrahigh performance liquid chromatography coupled to high resolution mass spectrometry (UPLC-HRMS) was established for characterization of the lipid profile of Skipjack tuna. Over 300 lipid molecular species were identified through cross-acquisition in both positive and negative ion mode. Phospholipids (PLs) were dominant in Skipjack tuna. Lysophosphatidylethanolamine (LPE), phosphatidylethanolamine (PE), lysophosphatidylcholine (LPC) and phosphatidylcholine (PC) were the main lipid molecular species in PLs, accounting for 89.24% of the total PLs. The ratio of sphingolipids (SLs) and glycerolipids (GLs) were considerable, accounting for 12.30% and 13.60% of the total lipids respectively. Ceramide (Cer) was the main lipid molecular species of SLs, accounting for 64.96% of total SLs, followed by sphingomyelin (SM), accounting for 25.45% of total SLs. Ether diglycerides (ether DG) were the main lipid molecular species of GLs (97.83%). The main fatty acids (FAs) are unsaturated fatty acids (UFAs) in Skipjack tuna. Besides, a new FAs class branched fatty acid esters of hydroxy fatty acids (FAHFA) was detected, together with the FA. The active lipids identified in this study can be used to evaluate the nutritional value of Skipjack tuna.

• Journal of Biomedical Engineering Research
• /
• v.44 no.3
• /
• pp.182-189
• /
• 2023

CT is a medical device that acquires medical images based on Attenuation coefficient of human organs related to X-rays. In addition, using this theory, it can acquire sagittal and coronal planes and 3D images of the human body. Then, CT is essential device for universal diagnostic test. But Exposure of CT scan is so high that it is regulated and managed with special medical equipment. As the special medical equipment, CT must implement quality control. In detail of quality control, Spatial resolution of existing phantom imaging tests, Contrast resolution and clinical image evaluation are qualitative tests. These tests are not objective, so the reliability of the CT undermine trust. Therefore, by applying an artificial intelligence classification model, we wanted to confirm the possibility of quantitative evaluation of the qualitative evaluation part of the phantom test. We used intelligence classification models (VGG19, DenseNet201, EfficientNet B2, inception_resnet_v2, ResNet50V2, and Xception). And the fine-tuning process used for learning was additionally performed. As a result, in all classification models, the accuracy of spatial resolution was 0.9562 or higher, the precision was 0.9535, the recall was 1, the loss value was 0.1774, and the learning time was from a maximum of 14 minutes to a minimum of 8 minutes and 10 seconds. Through the experimental results, it was concluded that the artificial intelligence model can be applied to CT implements quality control in spatial resolution and contrast resolution.

• Journal of Internet Computing and Services
• /
• v.24 no.4
• /
• pp.93-105
• /
• 2023

In order to transform the traditional aquaculture industry, which is dependent on experience, labor-intensive and natural environment, into future intelligent smart aquaculture, digital aquaculture improves aquaculture reproducibility and efficiency of production process through digitization of the aquaculture industry based on ICT equipments, Data analysis and utilization for promoted to increase the acceptability of aquaculturist. Europe's advanced fisheries countries have achieved rapid growth not only in aquaculture technology but also in the aquaculture equipment industry through digitization that combines information and communication technology with aquaculture farms. However, it is not possible to collect aquacultural data in Korea because it has not secured a Korean aquaculture industry for multi-variety, small-scale production and aquaculturists' refusal of reception for digital transformation. Therefore, this study intends to suggest the development direction of digital aquaculture to convert to intelligent smart aquaculture in the future by analyzing trends and critical technology.

• Journal of Practical Engineering Education
• /
• v.16 no.1_spc
• /
• pp.1-9
• /
• 2024

The introduction of smart factory digital twins is a concept that has already been proposed to increase productivity in the manufacturing industry through CPS(Cyber Physics System), and has been applied to specific industrial process stages or partially introduced in stages where simulation is required. However, with the recent development of the 4th Industrial Revolution technology, it is receiving attention again along with XR (Extended Reality) technology. However, because there are not many effective cases, this study analyzed the devices, equipment, and technology of the manufacturing process to build a digital twin applying digital threads and synchronized signals and information to control, remote control, and produce intelligent process automation equipment. A platform capable of analyzing information was proposed and developed. Through this, we designed and built an XR content service platform that can support artificial intelligence and developed it to enable control, remote control, and analysis of production information. A possible platform was proposed and developed. We hope that this study will be helpful in conducting research on many cases, and in the future, expanded research on increasing productivity in each part of the process and production is needed through intelligent models.