• Journal of Applied Reliability
• /
• v.7 no.2
• /
• pp.89-100
• /
• 2007

For the certification of aircraft and part, it must be show the compliance with applicable requirements through system safety assessment. The safety assessment process should be planned and managed to provide the necessary assurance that all relevant failure conditions have been identified and that all significant combinations of failures which could cause those failure conditions have been considered. Complex systems, especially aircraft, should take into account any additional complexities and interdependencies which arise due to integration. In all cases involving integrated systems, the safety assessment process is of fundamental importance in establishing appropriate safety objectives for the system and determining that the implementation satisfies these objectives. This study review the safety assessment for the certification process of the aircraft engine system and analyze turbo-fan engine by fault analysis method for compliance with airworthiness requirement of aircraft engine system.

• ETRI Journal
• /
• v.20 no.1
• /
• pp.37-45
• /
• 1998

Reduced surface field lateral double-diffused MOS transistor for the driving circuits of plasma display panel and field emission display in the 120V region have been integrated for the first time into a low-voltage $1.2{\mu}m$ analog CMOS process using p-type bulk silicon. This method of integration provides an excellent way of achieving both high power and low voltage functions on the same chip; it reduces the number of mask layers double-diffused MOS transistor with a drift length of $6.0{\mu}m$ and a breakdown voltage greater than 150V was self-isolated to the low voltage CMOS ICs. The measured specific on-resistance of the lateral double-diffused MOS in $4.8m{\Omega}{\cdot}cm^2$ at a gate voltage of 5V.

• Journal of Radiation Protection and Research
• /
• v.26 no.3
• /
• pp.265-270
• /
• 2001

Experimental data have been obtained on the neutron elastic scattering cross sections for 55, 65 and 75 MeV neutrons, and non-elastic scattering cross sections for 40 to 80 MeV neutrons using the $^7Li(p,n)$ neutron source at TIARA of Japan Atomic Energy Research Institute and the TOF method. Data were obtained for C, Si, Fe, Zr, and Pb of natural elements. Elastic scattering data were obtained for 25 laboratory angles between 2.6 and 53.0 that clarified the angular distributions and angle integrated values. The data obtained were compared favorably with recent LA150 data library.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2000.11a
• /
• pp.197-201
• /
• 2000

In this paper, a MMIC(Monolithic Microwave Integrated Circuit) broadband drive amplifier for wireless communication system has designed using active feedback method. The MMIC brodband amplifier was designed using 0.5$\mu\textrm{m}$ MESFET of ETRI library. Simulation results show that gain is 22 dB, and gain flatness ${\pm}$1 dB. Maximum output power 15 dBm and noise figure 2.5 dB in bandwidth 500 MHz ～3.0 GHz. The MMIC Broadband amplifer's chip area is 14mm${\times}$1.4mm.

• Journal of Navigation and Port Research
• /
• v.43 no.5
• /
• pp.302-309
• /
• 2019

This study introduces the navigational environment database(DB) compiling water depth, sediment type and marine managed areas (MMAs) in coastal waters of South Korea. The water depth and sediment data were constructed by combining their sparse points of electronic navigation chart and survey data with high spatial resolution using the inverse distance weighting and natural neighbor interpolation method included in ArcGIS. The MMAs were integrated based on all shapefiles provided by several government agencies using ArcGIS because the areas should be used in an emergency case of ship. To test the validity of the constructed DB, we conducted a test application for grounding and anchoring zones using a ship accident case. The result revealed each area of possible grounding candidates and anchorages is calculated and displayed properly, excluding obstacle places.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.27 no.3
• /
• pp.156-161
• /
• 2014

We have investigated the optical properties of plamonic waveguide with tapered structure based on InP material for photonic integrated circuit(PIC). The proposed plasmonic waveguide is covered with the Ag thin film to generate the plasmonic wave on metallic interface. The optical characteristics of plasmonic waveguide were calculated using the three-dimensional finite-difference time-domain method. The plasmonic waveguide was fabricated with the lengths of 2 to $10{\mu}m$ and the widths of 400 to 700 nm, respectively. The plasmonic mode and optical loss were measured. The optimum plasmonic length is $10{\mu}m$ and widths are 600 and 700 nm in the fabricated waveguide. This plasmonic waveguide can be directly integrated with other conventional optical devices and can be essential building blocks of PIC.

• Journal of Preventive Medicine and Public Health
• /
• v.56 no.3
• /
• pp.238-247
• /
• 2023

Objectives: Low adherence to antiretroviral (ARV) therapy in pregnant women with human immunodeficiency virus (HIV) increases the risk of virus transmission from mother to newborn. Increasing mothers' knowledge and motivation to access treatment has been identified as a critical factor in prevention. Therefore, this research aimed to explore barriers and enablers in accessing HIV care and treatment services. Methods: This research was the first phase of a mixed-method analysis conducted in Kupang, a remote city in East Nusa Tenggara Province, Indonesia. Samples were taken by purposive sampling of 17 people interviewed, consisting of 6 mothers with HIV, 5 peer facilitators, and 6 health workers. Data were collected through semi-structured interviews, focus group discussions, observations, and document review. Inductive thematic analysis was also performed. The existing data were grouped into several themes, then relationships and linkages were drawn from each group of informants. Results: Barriers to accessing care and treatment were lack of knowledge about the benefits of ARV; stigma from within and the surrounding environment; difficulty in accessing services due to distance, time, and cost; completeness of administration; drugs' side effects; and the quality of health workers and HIV services. Conclusions: There was a need for a structured and integrated model of peer support to improve ARV uptake and treatment in pregnant women with HIV. This research identified needs including mini-counseling sessions designed to address psychosocial barriers as an integrated approach to support antenatal care that can effectively assist HIV-positive pregnant women in improving treatment adherence.

• Journal of the Korean Society of Safety
• /
• v.30 no.4
• /
• pp.99-105
• /
• 2015

In this study, displacement estimation algorithm, which is not requiring an absolute reference point unlike the conventional displacement measurement method, is developed using the geophone. To estimate displacement of the bridge, measured velocity time signal is integrated in the frequency domain. And, the estimated displacement is compared with the measured result using a conventional method. Based on the dynamic field test results, it was found that the estimated displacement by the present algorithm is similar to that of a conventional method. The displacement estimation algorithm proposed in this paper can be effectively applied to measure the displacement of a structure, which is difficult to install a displacement transducer at the fixed point.

• Korean Management Science Review
• /
• v.14 no.2
• /
• pp.1-17
• /
• 1997

Many companies in these days have pursued an outsourcing policy to survive in a highly competitive world market. To effectively deal with the outsourcing policy, it is required that the companies have a useful method to rationally evaluate a supplier's performance from a viewpoint of a company's strategy and in a comparative-integrated manner. In this paper, we examined the relative importance of supplier selection criteria for a company's strategy by conducting a survey and proposed "Technique for Order Preference by Similarity to Ideal Solution(TOPSIS)" as one of the plausible techniques to evaluate a supplier's total performance. A hypothetical case study is presented to demonstrate the applicability of the method.

• Journal of the Korean Society of Systems Engineering
• /
• v.5 no.2
• /
• pp.1-9
• /
• 2009

This paper proposes an effective method on the DFILS(Design for Integrated Logistics Support) in ammunition development applying QFD(Quality Function Deployment) method. The goal of this research is to define the Design for ILS approach at the start of the ammunition development and to yield a set of reusable requirements. Based on 000mm High-Explosive(Warship ammunition) development work, a QFD software tool, CUPID, was used to analyze and define the field force's requirements. Additionally, a set of reusable requirements are identified and defined for use during the Design for ILS development phase in the next-generation ammunition development process. These set of requirements that consider both the priority and importance of the VOC(Voice of Customer) will contribute to the early phase of the ammunition development to implement the Design for ILS specialty engineering effort.