• JSTS:Journal of Semiconductor Technology and Science
• /
• 제1권3호
• /
• pp.189-192
• /
• 2001

A simple metal-insulator-metal (MIM) capacitor in a standard $0.25{\;}\mu\textrm{m}$ digital CMOS process is described. Using all six interconnect layers, this capacitor exploits both the lateral and vertical electrical fields to increase the capacitance density (capacitance per unit area). Compared to a conventional parallel plate capacitor in the four upper metal layers, this capacitor achieves lower parasitic substrate capacitance, and improves the capacitance density by a factor of 4. Measurements and an extracted model for the capacitor are also presented. Calculations, model and measurements agree very well.

• 한국광학회:학술대회논문집
• /
• 한국광학회 2004년도 제15회 정기총회 및 동계학술발표회
• /
• pp.298-299
• /
• 2004

We propose and theoretically analyze multi-functional integrated optical device based on figure-eight shaped birefringent Sagnac loops. Our analysis shows that the propose device exhibit many unique features which allows it to operate as a tunable high-Q comb filter with a good channel isolation, and the intensity transmission of the filter can be varied from zero to 100 percent.

• 전기학회논문지
• /
• 제59권1호
• /
• pp.220-224
• /
• 2010

In this study, we designed a device for consecutively observing position, utilizing 3-axises acceleration sensor. This method offer to check his or her wrong position and developed could to help derived a position appliance. And, we developed a Cobb's angle value in three dimensional using 3-axises acceleration sensor. A proposed device with integrated accelerometers, which can detect postural changes in terms of curvature variation of the spine in the sagittal and coronal planes, has been developed with intention to facilitate posture training. The proposed device was evaluated with 3 normal subjects daily activities. We evaluated the performance of our designed device as calculating the correlation coefficients and mean errors between the angle measured by an electro-goniometer and that estimated by a gravity accelerometer and verified the accuracy and sensitivity. The results showed that the angle obtained from the proposed device revealed a linear characteristic at the range of $\pm60^{\circ}$(correlation coefficient 0.99, error range $\pm2^{\circ}$). We demonstrated that our device could detect the changes of the motion in upper trunk accurately. Also, our device showed good potential for treatment of the patients with scoliosis and prevention of the unbalance position during a daily life.

• 한국정밀공학회지
• /
• 제29권4호
• /
• pp.380-385
• /
• 2012

This paper contains the optimized M2M technology, and the information of production resource of 4M, which understanding the roles and functions of M2M Device, and the explanation of its effectiveness, and the information of optimized M2M Device in IT convergence point of view. In addition, this content also points out the optimized M2M Device, analyzes and collects various type of management information which emphasizes the need for a common platform's were Middleware, and Auto-Configuration, WebLine Monitoring, WebService through the functionality of an integrated management information supports the productions by digitizing the information with standardized data for management efficiency.

• 한국정보통신학회논문지
• /
• 제5권3호
• /
• pp.573-579
• /
• 2001

소자의 고집적을 위한 특성분석 기술은 빠른 변화를 보이고 있다. 이에 따라 고집적 소자의 특성을 시뮬레이션을 통하여 이해하고 이에 맞게 제작하는 기술은 매우 중요한 과제 중의 하나가 되었다. 소자가 마이크론급에서 나노급 이하로 작아지면서 그에 맞는 소자개발을 위해 여러 가지 구조가 제시되고 있는데 본 논문에서는 TCAD를 이용하여 여러 가지 구조 중에서 고농도로 도핑된 ground plane 위에 적층하여 만든 EPI MOSFET를 조사하였다. 이 구조의 특성과 임팩트이온화와 전계 그리고 I-V특성 곡선을 저 농도로 도핑된 드레인(LDD)MOSFET와 비교 분석하였다. 또한 TCAD의 유용성을 조사하여 시뮬레이터로서 적합함과 나노구조 소자에서의 스켈링이론의 적합함을 보았다.

• 대한조선학회논문집
• /
• 제52권6호
• /
• pp.419-427
• /
• 2015

Recently Energy Saving Device has been developed actively due to the regulation of the EEDI. This Energy Saving Device which is newly developed is integrated duct and stator. This paper verified performance of the Energy Saving Device through CFD. The experimentation to find the best pitch angle of each blade of the stator designed has been conducted. The angle of incidence of the duct has been obtained through the measurement of the wake. The experimentation has been carried out with and without Energy Saving Device. The efficiency increase was through these two experiments.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2001년도 춘계종합학술대회
• /
• pp.311-316
• /
• 2001

소자의 고집적을 위한 특성분석 기술은 빠른 변화를 보이고 있다. 이에 따라 고집적 소자의 특성을 시뮬레이션을 통하여 이해하고 이에 맞게 제작하는 기술을 매우 중요한 과제 중의 하나가 되었다. 소자가 마이크론급에서 나노급 이하로 작아지면서 그에 맞는 소자개발을 위해 여러 가지 구조가 제시되고 있는데 본 논문에서는 TCAD를 이용하여 여러 가지 구조 중에서 고농도로 도핑된 ground plane 위에 적층하여 만든 EFI MOSFET와 LDD구조의 단점을 개선한 newEPI MOSFET에 대해 조사하였다. 이 구조의 특성과 임팩트이온화와 전계 그리고 I-V 특성 곡선을 저 농도로 도핑된 드레인(LDD) MOSFET와 비교 분석하였다. 또한 TCAD의 유용성을 조사하여 시뮬레이터로서 적합함과 나노구조 소자에서의 스켈링이론의 적합함을 보았다.

• 대한의용생체공학회:의공학회지
• /
• 제43권4호
• /
• pp.219-229
• /
• 2022

In this study, we propose a miniaturized micro-ceramic heater device. After screen-printing a silver paste between pre-sintered two aluminum oxide plates to integrate a heating circuit, the device was fabricated through a low-temperature sintering process. In order to configure the optimal heating circuit integration condition, the output current evaluation and heating test were performed according to the number of screen prints of the silver paste at various voltages. A silver paste-based heating circuit printed with a line width of 200 ㎛ and a thickness of 60 ㎛ was successfully integrated on a pre-sintered alumina substrate through a low-temperature sintering process. In the case of the 5 times printed device, the thermal response showed a response rate of 18.19 ℃/sec. To demonstrate feasibility of the proposed device in the medical field, such as bio-tissue suturing and hemostasis, a voltage was applied to pig tissue in the device to test tissue change due to heat generated from the device. These results show the possibility that the proposed small ceramic heater could be used in the medical field based on its excellent temperature response.

• 대한의용생체공학회:의공학회지
• /
• 제44권2호
• /
• pp.99-108
• /
• 2023

According to the COVID-19, development of various medical software based on IoT(Internet of Things) was accelerated. Especially, interest in a central software system that can remotely monitor and control ventilators is increasing to solve problems related to the continuous increase in severe COVID-19 patients. Since medical device software is closely related to human life, this study aims to develop central monitoring system that can remotely monitor and control multiple ventilators in compliance with medical device software development standards and to verify performance of system. In addition, to ensure the safety and reliability of this central monitoring system, this study also specifies risk management requirements that can identify hazardous situations and evaluate potential hazards and confirms the implementation of cybersecurity to protect against potential cyber threats, which can have serious consequences for patient safety. As a result, we obtained medical device software manufacturing certificates from MFDS(Ministry of Food and Drug Safety) through technical documents about performance verification, risk management and cybersecurity application.

• 한국소음진동공학회논문집
• /
• 제23권2호
• /
• pp.160-166
• /
• 2013

This paper proposes a driver supportive device with haptic cue function which can be applicable for vehicles adopting manual transmission system to transmit gear-shifting information to a driver by kinesthetic forces. This haptic cue function is implemented on accelerator pedal by utilizing magnetorheological(MR) fluid and clutch mechanism. In order to achieve this goal, an MR clutch mechanism is devised to be capable of rotary motion of accelerator pedal. The proposed MR clutch is then optimally designed and manufactured under consideration of spatial limitation of vehicles. After transmission torque is experimentally evaluated according to field intensity. The manufactured MR clutch is integrated with accelerator pedal and electric motor to establish the haptic cue device. Control performances are experimentally evaluated via a simple feed-forward control algorithm.