• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5B
• /
• pp.741-752
• /
• 2010

The ability to seamlessly switch between the macro networks and femtocell networks is a key driver for femtocell network deployment. The handover procedures for the integrated femtocell/macrocell networks differ from the existing handovers. Some modifications of existing network and protocol architecture for the integration of femtocell networks with the existing macrocell networks are also essential. These modifications change the signal flow for handover procedures due to different 2-tier cell (macrocell and femtocell) environment. The handover between two networks should be performed with minimum signaling. A frequent and unnecessary handover is another problem for hierarchical femtocell/macrocell network environment that must be minimized. This work studies the details mobility management schemes for small and medium scale femtocell network deployment. To do that, firstly we present two different network architectures for small scale and medium scale WCDMA femtocell deployment. The details handover call flow for these two network architectures and CAC scheme to minimize the unnecessary handovers are proposed for the integrated femtocell/macrocell networks. The numerical analysis for the proposed M/M/N/N queuing scheme and the simulation results of the proposed CAC scheme demonstrate the handover call control performances for femtocell environment.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2008.10a
• /
• pp.205-207
• /
• 2008

The new process for hybrid silicon thin film transistor (TFT) using DPSS laser has been developed for realizing both low-temperature poly-Si (LTPS) TFT and a-Si:H TFT on the same substrate as a backplane of active matrix liquid crystal display. LTPS TFTs are integrated on the peripheral area of the panel for gate driver integrated circuit and a-Si:H TFTs are used as a switching device for pixel in the active area. The technology has been developed based on the current a-Si:H TFT fabrication process without introducing ion-doping and activation process and the field effect mobility of $4{\sim}5\;cm^2/V{\cdot}s$ and $0.5\;cm^2/V{\cdot}s$ for each TFT was obtained. The low power consumption, high reliability, and low photosensitivity are realized compared with amorphous silicon gate driver circuit and are demonstrated on the 14.1 inch WXGA+ ($1440{\times}900$) LCD Panel.

• 전자공학회논문지 IE
• /
• v.49 no.2
• /
• pp.82-88
• /
• 2012

In this paper, using the Android-based mobile platform designed and integrated U-healthcare systems for personal health care system is proposed. Integrated Biometric systems, electrocardiogram (ECG), oxygen saturation, blood pressure, respiration, body temperature, such as measuring vital signs throughout the module and signal processing biometric information through wireless communication module based on the Android mobile platform is transmitted to the gateway. Biometric data transmitted from a mobile health monitoring system, or transmitted to the server of U-healthcare was designed. By implementing vital signs monitoring system has been measured in vivo by monitoring data to determine current health status of caregivers had the advantage of being able to guarantee mobility respectively. This system is designed as personal health management and monitoring system for emergency patients will be helpful in the development looks U-healthcare system.

• Proceedings of the IEEK Conference
• /
• 2002.07b
• /
• pp.1137-1140
• /
• 2002

A V-band low-noise amplifiers (LNA) based on the Millimeter-wave monolithic integrated circuit (MIMIC) technology were fabricated using high performance 0.1 $\mu\textrm{m}$ $\Gamma$-shaped pseudomorphic high electron mobility transistors (PHEMT＇s), coplanar waveguide (CPW) structures and the integrated process for passive and active devices. The low-noise designs resulted in a two-stage MIMIC LNA with a high S$\sub$21/ gain of 14.9 dB and a good matching at 60 ㎓. 20 dBm of IP3 and 3.9 dB of minimum noise figure were also obtained from the LNA. The 2-stage LNA was designed in a chip size of 2.3 ${\times}$1.4 mm$^2$by using 70 $\mu\textrm{m}$ ${\times}$2 PHEMT’s. These results demonstrate that a good low-noise performance and simultaneously with a high gain performance is achievable with GaAs PHEMT's in the 60 ㎓ band.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.5
• /
• pp.525-532
• /
• 2004

In this paper, we proposed a multicast routing algorithm for QoS improvement in the wire/wireless integrated environment. We analyzed requests and characteristics of QoS, and then proposed a new algorithm that can improve QoS by adding node mobility to wire environment. This new algorithm constructs a dynamic multicast tree that can prevent a loss of packet and save the bandwidth. As a result of simulations comparing to another multicast algorithms, we showed that this new algorithm can simply and dynamically adjusts the construction of multicast tree with little delay and the most reducible bandwidth resources.

• Journal of Advanced Navigation Technology
• /
• v.9 no.2
• /
• pp.93-102
• /
• 2005

This paper presents an interface configuration between Access Point(AP) and Radio Over Fiber (ROF) transceiver for the wireless internet system. The wireless internet could provides 60km/h mobility and 50Mbps IP based data services for each mobile terminal. Thus, cost effective cell infrastructure is inevitably required. This paper suggests an interface configuration between AP and passive integrated picocell(PIP) involving ROF links. Nonlinear characteristics of ROF link using a typical FP transceiver are measured for wireless internet applications.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.500-500
• /
• 2011

With recent advances in flexible and stretchable electronics, the development of physically responsive field-effect transistors (physi-FETs) that are easily integrated with transformable substrates may enable the omnipresence of physical sensing devices in electronic gadgets. However, physical stimuli typically induce whole sensing physi-FET devices under global influences that also cause changes in the parameters of FET transducers, such as channel mobility and dielectric capacitance that prevent proper interpretations of response in sensing materials. Extended-gate structures with isolated stimuli have been used recently in physi-FETs to demonstrate performances of sensing materials only. However, such approaches are limited to prototype researches since isolated stimuli rarely occur in real-life applications. In this report, we theoretically and experimentally demonstrated that integrating piezoelectric nanocomposites directly into flexible organic FETs (OFETs) as gate dielectrics provides a general research direction to physi-FETs with a simple device structure and the capability of precisely investigating functional materials. Measurements with static stimulations, which cannot be performed in conventional systems, exhibited giant-positive d33 values of nanocomposites of barium titanate (BT) NPs and poly (vinylidene fluoride-trifluoroethylene) (P(VDF-TrFE)).

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.11 s.242
• /
• pp.1518-1526
• /
• 2005

With increasing need of transportation services for people with disabilities and the aged, wheelchairs are used as their assistive devices to participate in daily and recreational activities and as seats of motor vehicle. However, as wheelchairs are primarily designed fer mobility assistive devices, not for vehicle seats, wheelchair users may experience serious injury when they meet car crashes. To date, neither engineering guidance for a wheelchair mounting system on the vehicle floor nor safety assessment analysis by a car crash has been studied for the domestic users. In this paper, in accordance with the ANSVRESNA WC-19, a fixed vehicle mounted wheelchair occupant restraint system (FWORS), wheelchair integrated restraint system (WIRS), and wheelchair integrated x-bend restraint system (WIXRS) subjected to frontal impact (20 g, 48 U) were analyzed using compute. simulations for domestic users. We present surrogate wheelchair occupant safety by head injury criteria (HIC), motion criteria (MC), and combined injury criteria (CIC).

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.384-387
• /
• 2003

In this paper, we have designed the integrated wire and wireless P2P framework using mobile agents to share efficiently resources as media file. Most of the P2P applications are used on the wire network. We propose the integrated wire and wireless P2P framework. Proposed P2P platform is based on JXTA of Sun Microsystems. But JXTA is pure peer-to-peer network model, so it sends message other peers as broadcast style to request resources. In this way, there are some problems as massage overload, bandwidth loss, etc. In order to solve this problem, we propose a hybrid peer-to-peer network model using mobile agent. Proposed scheme also solve existing hybrid pEp model's flaws which have the delay and low rate due to concentrated server. In proposed scheme, mobile agents that have autonomy and mobility are used to search the location of resources. Besides, mobile agents could solve the loss problem of the search result. To improve P2P QoS(Quality of Service), we could monitor peer's state information using PIP(Peer Information Protocol) of JXTA.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.1
• /
• pp.64-83
• /
• 2012

The number of smart phone users is rapidly growing due to recent increase in wireless Internet usage, development of a wide variety of applications, and activation of M2M (Machine to machine) services. Although the smart phone offers benefits of mobility and convenience, it also has serious security problems. To utilize M2M services in the smart phone, a flexible integrated authentication and access control facility is an essential requirement. To solve these problems, we propose a context-aware single sign-on and access control system that uses context-awareness, integrated authentication, access control, and an OSGi service platform in the smart phone environment. In addition, we recommend Fuzzy Logic and MAUT (Multi-Attribute Utility Theory) in handling diverse contexts properly as well as in determining the appropriate security level. We also propose a security system whose properties are flexible and convenient through a typical scenario in the smart phone environment. The proposed context-aware security system can provide a flexible, secure and seamless security service by adopting diverse contexts in the smart phone environment.