• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3899-3902
• /
• 2013

• 플랜트 저널
• /
• 제6권3호
• /
• pp.40-45
• /
• 2010

Necessity to install control towers has been studied to acquire overseas energy resources and to secure funds. At present, domestic energy companies do business independently. Institutions which support plant EPC companies as partners of package deal are separated. This causes the low records at package deal for overseas resources acquisition. Except UK and USA, nations which have major companies developed overseas energy resources early by promoting a large national company. Consequently, they currently have good records. This study suggests the necessities to install integrated control tower for overseas energy resources acquisition and securing funds and the following are the ways ; 1) promote a large national company by consolidation of separate energy companies, 2) install plant EPC promotion department which support private plant EPC companies, 3) make a integrated control tower in high level government office to connect between a large national company and plant EPC promotion department.

• 한국수소및신에너지학회논문집
• /
• 제31권3호
• /
• pp.276-283
• /
• 2020

Alcohol-based solvents including ethanol (EtOH) and tert-butyl alcohol (TBA) are investigated instead of isopropanol (IPA), which is a common solvent for polytetrafluoroethylene (PTFE), as an alternative solvent for preparing the catalyst slurry with PTFE binder. As a result, the performance at 0.2 A/㎠ from the single cells from using catalyst slurries based on EtOH and TBA showed very similar value to that from the slurry using IPA, which implies the EtOH and TBA can be used as a solvent for the catalyst slurry. It is also confirmed by the very close values of the total resistance of the membrane electrode assemblies from the slurries using different solvents. In the energy dispersive spectrometry (EDS) image, the shape of crack and dispersion of PTFE are changed according to the vapor pressure of the solvent.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.813-818
• /
• 2008

In order to reduce energy consumption, this study presents a way to energy reduction through energy-feedback which enables a household to self-recognize the need for energy reduction and respond to. The effect of this energy-feedback has been reported as $10{\sim}15%$ in average, and been actively investigated in abroad from 1970's while study in korea has been in its first step. In this study, examination on the cases of abroad study is made as it shows the effectiveness and applicability of energy feedback. And paradigms to consider for application to korea will be suggested anticipating the change of actions through energy feedback.

• 한국태양에너지학회 논문집
• /
• 제30권5호
• /
• pp.56-62
• /
• 2010

The integration of PV modules into building facades or roof could raise their temperature that results in the reduction of PV system's electrical power generation. Hot air can be extracted from the space between PV modules and building envelope, and used for heating in buildings. PV/thermal collectors, or more generally known as PVT collectors, are devices that operate simultaneously to convert solar energy from the sun into two other useful energies, namely, electricity and heat. This paper compares the experimental performance of BIPVT((Building-Integrated Photovoltaic Thermal) collectors that applied on building roof and facade. There are four different cases: a roof-integrated PVT type and a facade-integrated PVT type, the base models with an air gap between the PV module and the surface, and the improved models for each types with aluminum fins attached to the PV modules. The accumulated thermal energy of the roof-integrated type was 15.8% higher than the facade-integrated regardless of fin attachment. The accumulated electrical energy of the roof-integrated type was 7.6% higher, compared to that of the facade-integrated. The efficiency differences among the collectors may be due to the fact that the pins absorbed heat from the PV module and emitted it to air layer.

• 한국과학교육학회지
• /
• 제21권2호
• /
• pp.342-356
• /
• 2001

우리나라 제 6차 교육과정과 2002년부터 점차로 적용되는 제 7차 교육과정은 중등학교에서의 통합과학교육을 강조하고 있다. 그럼에도 불구하고 대부분의 중등학교 과학교사가 통합과학교과의 지도에 있어 애로를 겪고 있으며, 이는 실제적인 중등학교 통합과학교육의 심각한 문제점으로 대두되고 있다. 본 논문에서는 이러한 문제점의 원인을 일선과학 교사가 통합과학교육을 실제로 어떻게 실행해야하는지를 충분히 인식하지 못하고 있다는 점(손연아와 이학동, 1999) 과 실제 수업에서 교사가 활용할 수 있는 통합과학 교수-학습자료가 불충분하다는 점에서 찾았다. 실제 수업에서 통합과학교육 실행의 문제점을 해결하기 위해서 본 논문에서는 다음과 같은 통합과학교육의 3가지 방향을 적용하였다 : 지식내용 중심의 통합과학교육, 사회문제 중심의 통합과학교육, 개인흥미중심의 통합과학교육. 이상의 관점에 따라 본 논문에서는 통합과학교육의 3가지 방향에 대한 실제적 교수 학습 전략을 모색하기 위해서 다음의 2 단계로 연구를 진행하였다. 먼저, 한국의 제 6, 7차 과학교육과정과 7종의 공통과학 교과서, 그리고 미국의 NSES와 Benchmarks 국가 과학교육과정에 포함된 에너지 관련 내용을 분석하여 본 논문에서 공통적으로 적용할 4가지 에너지 관련 개념을 추출하였다; 에너지 보존, 에너지 전환, 에너지 흐름, 에너지 감성, 다음으로, 이상에서 분석한 에너지 관련 내용과 추출한 개념을 중심으로 3가지 통합과학교육의 방향을 기초로 한 3가지 '에너지' 주제의 교수 학습 개념 구조도를 구성하였다. 이러한 통합과학 교수 학습 전략은 통합의 방향별 에너지 주제의 통합과학교육 실행을 위해 후속 연구에서 제시될 통합과학 교수 학습 방안을 모색하는데 이론적 근거로 제공될 것이다.

• Current Photovoltaic Research
• /
• 제11권2호
• /
• pp.54-57
• /
• 2023

Recently, requirements for improving the convenience of constructing BIPV (Building Integrated Photo Voltaic) modules had increased. To solve this problem, we fabricated shingled PV modules integrated with bent steel plates for building integrated photovoltaics. These PV modules could be constructed directly on the roof without the installation structure. We found optimal lamination conditions with supporting structures to fabricate a module on a bent steel plate. Moreover, we applied a shingled design to PV modules integrated with bent steel plates to achieve a high electrical output power. The shingled module with bent steel plates shows 142.80 W of solar-to-power conversion in 0.785 m² area.

• Elastomers and Composites
• /
• 제58권1호
• /
• pp.11-16
• /
• 2023

Electronic skin (e-skin), devices that are mounted on or attached to human skin, have advanced in recent times. Yet, the development of a power supply for e-skin remains a challenge. A stretchable thermoelectric generator is a promising power supply for the e-skin patches. It is a safe and semi-permanent energy harvesting device that uses body heat for generating power. Carbon nanotube (CNT) clays are used in energy-harvesting e-skin patches. In this study, we report improved thermoelectric performance of CNT clays by using chemical doping and physical blending of thermoelectric enhancers. The n-type and p-type thermoelectric enhancers increase electrical conductivity, leading to increased power factors of the thermoelectric CNT clays. The blend of CNT clays and enhancers is intrinsically stretchable up to 50% while maintaining its thermoelectric property.

• 에너지공학
• /
• 제23권2호
• /
• pp.83-92
• /
• 2014

본 논문에서는 집단에너지 부문과 도시가스 부문의 경제적 파급효과를 비교분석하고자 한다. 이를 위해 산업연관분석을 적용하되 가장 최근에 발표된 2011년도 산업연관표를 이용한다. 특히 두 개 부문을 각각 외생화하여 분석함으로써 자기부문에 대한 효과와 타 부문에 대한 효과를 구분한다. 수요유도형 모형을 적용하여 생산유발효과, 부가가치 유발효과, 취업유발효과를 정량화한다. 아울러 공급유도형 모형 및 레온티에프 가격모형을 운용하여 각각 공급지장효과 및 물가파급효과를 계량화한다. 분석 결과 집단에너지 부문과 도시가스 부문의 생산유발효과, 부가가치 유발효과, 취업유발효과는 각각 1.5461 : 1.0297, 0.4759 : 0.1941, 2.2885 : 0.4053으로 전자의 값이 후자의 그것보다 1.5배에서 5.6배의 크기를 보였다. 집단에너지 부문 및 도시가스 부문 10% 요금인상의 물가파급효과는 각각 0.0127% 및 0.1585%로 전자가 후자의 8% 수준에 불과했다. 이러한 정량적 정보는 특정 지역에 난방원을 공급 하는 것과 관련된 경제적 파급효과와 요금조정의 물가파급효과를 사전적으로 예측하는 데 유용하게 활용될 수 있다.

• 국제초고층학회논문집
• /
• 제6권2호
• /
• pp.197-205
• /
• 2017

The conflict between indoor environmental quality and energy consumption has become an unneglectable problem for highrise office buildings, where occupants' productivity is highly affected by their working environment. An effective Façade, therefore, should play the role of an active building skin by adapting to the ever-changing external environment and internal requirements. This paper explores the energy-saving and indoor environment-improving potential of a phase-change material (PCM) integrated Façade. Building performance simulations, combined with parametric study and sensitivity analysis, are adopted in this research. The result quantifies the potential of a PCM-integrated Façade with different configurations and PCM properties, taking as an example a south-oriented typical office room in Shanghai. It is found that a melting temperature of around $22^{\circ}C$ for the PCM layer is optimal. Compared to a conventional Façade, a PCM-integrated Façade effectively reduces total energy use, peak heating/cooling load, and operative temperature fluctuation during the periods of May-July and November-December.