• Journal of Electrical Engineering and Technology
• /
• v.6 no.2
• /
• pp.226-232
• /
• 2011

The $H_{\infty}$ approach, adopted in this paper, is based on loop shaping using a normalized coprime factor combined with a field-oriented control to control induction motor. We develop two loops. The first one, the inner loop, controls the stator current by $H{\infty}$ controller in order to obtain good performance. The second loop, the outer one, guarantees stability and tracking performance of speed and rotor flux using a proportional integral controller. When the rotor flux cannot be measured, we introduce a flux observer to estimate the rotor flux. Simulation and experimental results are presented to validate the effectiveness and the good performance of this control technique.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.63 no.9
• /
• pp.1245-1247
• /
• 2014

This paper presents a robust position tracking controller for motor-driven flexible joint manipulators using only the motor angle measurement. The control problem is not easy because the link position is hard to estimate in the presence of parameter uncertainties. The proposed controller consists of a feedback linearization controller (FLC) and two proportional-integral observers (PIOs) that estimate both system states including the link position and an equivalent disturbance for compensating the parameter uncertainties. Comparative computer simulations are conducted to demonstrate the effectiveness of the proposed control algorithm.

• The Journal of Korea Robotics Society
• /
• v.15 no.1
• /
• pp.77-89
• /
• 2020

This paper proposes a simple and intuitive model-free torque-tracking control for rotary electro-hydraulic actuators. The undesirable natural-velocity-feedback effect is discussed by introducing mechanical impedance into the electro-hydraulic actuation system. The proposed model-free torque control comprises inner- and outer-loop control to achieve two control objectives. Inner-loop control reduces the mechanical impedance passively and optimally. To improve the tracking accuracy, a certain form of proportional-integral-derivative control is applied to the outer loop. The robustness of the proposed closed-loop system against external disturbances is demonstrated by transforming the two-loop control structure into a disturbance observer form. The proposed method is validated on a single joint electro-hydraulic actuator.

• Proceedings of the KIPE Conference
• /
• 2004.07a
• /
• pp.1-5
• /
• 2004

This paper describe a control scheme for direct torque control of BLDC Motor. The proposed Luenberger Observer scheme calculate flux errors in order to control the torque and flux more correctly. This proposed control scheme has not the requirement of a separate current regulator and proportional-integral (PI) control of the flux and torque, there by improving transient performance and also has the advantage of less torque ripple in steady state with a fixed switching period. The effect of proposed method has been proven by simulations.

• Proceedings of the KIEE Conference
• /
• 1999.07b
• /
• pp.579-582
• /
• 1999

This paper presents a design method of deadbeat controller for DC motor driving a rotational system with gear. The results of sampling a continuous-data process does not guarantee that no ripples occur between the sampling instants in the continuous-data output, but the proposed deadbeat control system that consists of the integral controller and the full state observer, and zero order hold using in continuous systems, has many advantages of such as an output response without the ripple and reaching the steady state without error after a given sampling period and faster settling time than the optimal control system in the short sampling period. The results of case study through matlab simulation shown that the efficiency of the proposed controller for DC motor driving a rotational system with gear, is verified by comparing with optimal controller etc.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.215-218
• /
• 1995

In this paper, a sliding mode controller (SMC) which can be characterized by high accuracy, fast response and robustness is applied to speed control of AC-SERVO motor. The control input is changed to continuous one in the boundary layer to reduce the chattering phenomenon, and the boundary layer converges to zero when the state variables of system reach to steady state values. The integral compensator is added to reduce steady state error and to provide the continuous torque reference. The acceleration which is necessary to get the sliding plane is estimated by an observer. Sliding surface is included in control input to enhance the robustness and transient response without increasing sliding mode controller gain. The proposed controller is implemented by DSP(digital signal processor). The effectiveness of the proposed control scheme for speed controller is shown by the real-time experimental results in the paper.

• Proceedings of the KIPE Conference
• /
• 2006.06a
• /
• pp.13-15
• /
• 2006

센서리스 제어를 위한 상태 관측기의 설계시 기존의 바이너리 관측기의 성능을 향상시키기 위해 스위칭 평면에 적분항을 추가함으로서 정상상태의 성능을 향상시킬 수 있다. 또한 전동기의 관성계수나 마찰계수와 같은 운동방정식의 파라미터들은 계측하기 어려우며 관측기의 성능저하를 야기하므로 실제구현에서도 많은 제약이 따른다. 이러한 문제를 해결하기 위해 적응 적분바이리 관측기를 제안하다. 그리고 정격속도 이상으로 구동하기 위해서 약계자 영역에서의 센서리스 제안한다. IPMSM이 w가 보다 높은 속도에서 운전되기 위해서는 정격전압이상의 입력이 요구되어진다. 그러나 정격전압에서 d축 전류가 회전자 자속을 감소시키는 방향으로 주입된다면 더 높은 속도에서 운전되어질 수 있다.

• Journal of the Optical Society of Korea
• /
• v.10 no.4
• /
• pp.174-177
• /
• 2006

We propose a new technique to minimize gain-transient time of wavelength-division-multiplexing (WDM) signals in erbium-doped fiber amplifiers (EDFA) in channel add/drop networks. We have dramatically reduced the gain-transient time to less than $3{\mu}sec$ by applying, for the first time to our knowledge, a disturbance observer with a proportional/integral/differential (PID) controller to the control of EDFA gain. The $3{\mu}sec$ gain-transient time is the fastest one ever reported and it is approximately less than 1.5% of $200{\mu}sec$ gain-transient time of commercially available EDFAs for WDM networks. We have demonstrated the superiority of the new technique by performing the simulation with a numerical modeling software package such as the $Optsim^{TM}$.

• Proceedings of the KIEE Conference
• /
• 1998.07c
• /
• pp.1228-1230
• /
• 1998

The deadbeat control has many advantage such as the ouput response without a ripple and the fast settling time. This paper presents a deadbeat control system to damp out the sustained low frequency oscillation. The proposed deadbeat control system consists of th integral controller and the state observer, and it is simulated on the one-machine infinite-bus model of a power system. The efficiency of the proposed control system is verified through the several case studies.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1999.12a
• /
• pp.477-483
• /
• 1999

This paper presents a design of deadbeat control system for DC motor driving such a rotational mechanical system with gear as a printing machine. The deadbeat response design developed for control system of a sampled continuous-data process does not guarantee zero intersampling ripples, but the proposed deadbeat control system that consists of the integral controller and the full-order state observer, has many advantages such as an output response without the ripples, and setting time than the optimal control system in the same sampling period. The results of case study through MATLAB simulation are shown that the efficiency of the proposed controller for DC motor driving a rotational system with gear is verified by comparing with optimal controller etc..