• 대한전자공학회논문지SP
• /
• 제47권6호
• /
• pp.1-9
• /
• 2010

본 논문에서는 집적 영상을 효율적으로 압축하는 방법을 제안한다. 집적 영상은 3차원 영상을 기록하고 표현하는 대표적인 기술이다. 제안된 방법은 3D 이산 코사인 변환(3D-DCT)를 기반으로 하고 있다. 집적 영상 부호화에서 3D-DCT는 인접요소 영상간의 중복성을 줄이는 효율적인 압축 방법으로 알려져 있다. 제안방법은 3D-DCT에 기반 하면서 적응적인 블록 모드를 이용한 효과적인 집적영상 압축 방법으로서, 영상의 특성에 따라 적응적으로 3D-DCT 블록을 구성함으로써 가변블록 크기 3D-DCT 블록을 생성하고, 이 가변블록 크기의 3D 블록에 대해 3D-DCT를 수행한다. 실험 결과를 보면 제안방법이 기존 방법과 비교해서 더욱 높은 압축 효율을 보여주었다. 특히 영상이 복잡하여 많은 비트량이 발생하는 영상이 오버헤드 비트의 영향이 적기 때문에 더 좋은 압축 효율을 보여주었다.

• 대한전기학회논문지
• /
• 제36권6호
• /
• pp.396-402
• /
• 1987

A Composite method of finite element and boundary integral methods is introduced to solve the magnetostatic field problems with open boundary. Only the region of prime interest is taken as the compution region where the finite element method is applied. The boundary conditions of the region are dealt with using boundary integral method. The boundary integration in the boundary integral method is done by numerical and analytical techniques repectively. The proposed method is applied to a simple linear problem, and the results are compared with those of the finite element method and the analytic solutions. It is concluded that the proposed method gives more accurate results than the finite element method under the same computing efforts.

• International Journal of Fuzzy Logic and Intelligent Systems
• /
• 제7권1호
• /
• pp.77-84
• /
• 2007

In this paper, Takagi-Sugeno (TS) fuzzy integral control is investigated to regulate the output voltage of an asymmetric half-bridge (AHB) DC/DC converter; First, we model the dynamic characteristics of the AHB DC/DC converter with state-space averaging method and small perturbation at an operating point. After introducing an additional integral state of the output regulation error, we obtain the $5^{th}$-order TS fuzzy model of the AHB DC/DC converter. Second, the concept of the parallel distributed compensation is applied to design the fuzzy integral controller, in which the state feedback gains are obtained by solving the linear matrix inequalities (LMIs). Finally, simulation results are presented to show the performance of the considered design method as the output voltage regulator and compared to the results for which the conventional loop gain method is used.

• Structural Engineering and Mechanics
• /
• 제6권4호
• /
• pp.457-466
• /
• 1998

The dynamic response of an elastic torsion shaft of revolution is analysed by the Line-Loaded Integral Equation Method (LLIEM). A "Dynamic Point Ring Couple" (DPRC) is used as a fictitious fundamental load and is distributed in an elastic space along the axis of the shaft outside the shaft occupation. According to the boundary condition, our problem is reduced to a 1-D Fredholm integral equation of the first kind, which is simpler for solving than that of a 2-D singular integral equation of the same kind obtanied by Boundary Element Method (BEM), for steady periodically varied loading. Numerical example of a shaft with quadratic generator under sinusoidal type of torque is given. Formulas for stresses and dangerous frequency are mentioned.

• Journal of applied mathematics & informatics
• /
• 제40권5_6호
• /
• pp.983-993
• /
• 2022

The main purpose of this paper is to solve the second kind Volterra integral equations by Clenshaw-Curtis spectral collocation method. First of all, we can transform the integral interval from [-1, x] to [-1, 1] through a simple linear transformation, and discretize the integral term in the equation by Clenshaw-Curtis quadrature formula to obtain the collocation equations. Then we provide a rigorous error analysis for the proposed method. At last, several numerical example are used to verify the results of theoretical analysis.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.341-348
• /
• 2001

A Mixed Volume and Boundary Integral Equation Method is applied for the effective analysis of plane elastostatic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions. It should be noted that this newly developed numerical method does not require the Green's function for anisotropic inclusions to solve this class of problems since only Green's function for the unbounded isotropic matrix is involved in their formulation for the analysis. This new method can also be applied to general two-dimensional elastodynamic and elastostatic problems with arbitrary shapes and number of anisotropic inclusions and voids or isotropic inclusions. Through the analysis of plane elastostatic problems in unbounded isotropic matrix with orthotropic inclusions and voids or isotropic inclusions, it will be established that this new method is very accurate and effective for solving plane elastic problems in unbounded solids containing general anisotropic inclusions and voids or isotropic inclusions.

• 오토저널
• /
• 제12권1호
• /
• pp.26-32
• /
• 1990

This study investigated a method for the determination of the J-integral for a tough glassy polymer such as polycarbonate plates by using the method of caustics. Comparing the values of J-integral determined by a numerical analysis and by the method of caustics, the method of caustics was found to be an effective experimental technique for the determination of the J-integral. The ratio between two J-integrals determined by the method of caustics and by finite element method converged into 1 within the limit of low load. However, it was noticed that the greater the plastic zone at the crack tip was, the lower the J-integral obtained by the reflect method of caustics. This difference may be deduced from the damage at the crack tip such as craze appeared in the polycarbonate plate. It was confirmed that the ratio of longitudinal diameter( $D_{l}$ ) to transverse diameter ( $D_{t}$) of caustics generally converged into 1 at the low load. The transition of the state of stress at the vicinity of a crack tip from plane strain to plane stress was deduced by noticing that the longitudinal diameter( $D_{l}$ ) grew faster than the transverse diameter( $D_{t}$) of caustics within the higher load range.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제21권1호
• /
• pp.61-75
• /
• 2014

The purpose of this paper is to obtain some integral inequalities with impulses by using the method of Stieltjes derivatives, and we use our results in the study of Lyapunov stability of solutions of a certain nonlinear impulsive integro-differential equation.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2008년도 International Meeting on Information Display
• /
• pp.1127-1130
• /
• 2008

Integral imaging is a three-dimensional display technique which has 100 years of history. The method is characterized by offering full parallax, almost-continuous viewpoints and easiness of moving picture display. In this paper, the history of the method is briefly explained and overview of its current status is provided.

• 대한기계학회논문집A
• /
• 제26권5호
• /
• pp.795-802
• /
• 2002

For assessing significance of a defect in a component operating at high (creeping) temperatures, accurate estimation of fracture mechanics parameter, $C^{*}$-integral, is essential. Although the J estimation equation in the GE/EPRl handbook can be used to estimate the $C^{*}$-integral when the creep -deformation behavior can be characterized by the power law creep, such power law creep behavior is a very poor approximation for typical creep behaviors of most materials. Accordingly there can be a significant error in the $C^{*}$-integral. To overcome problems associated with GE/EPRl approach, the reference stress approach has been proposed, but the results can be sometimes unduly conservative. In this paper, a new method to estimate the $C^{*}$-integral for deflective components is proposed. This method improves the accuracy of the reference stress approach significantly. The proposed calculations are then validated against elastic -creep finite element (FE) analyses for four different cracked geometries following various creep -deformation constitutive laws. Comparison of the FE $C^{*}$-integral values with those calculated from the proposed method shows good agreements.greements.